Question about 2005 Lexus RX330

1 Answer

Program garage door opener in 2005 rx 330

I do not have an owners manual and i really want to program my car to open the garage door

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

There are 3 programmable Homelink buttons you can use for different remotes. Just to the right of the buttons there is an indicator light.

Decide which button you want to program. Point the none battery end of your remote 1"-3" away from the Homelink panel and press both the remote and desired Homelink button down and hold them down at the same time. After about 20 seconds, the Homelink indicator light will change from a slow flashing to a rapid flashing. You can then release both buttons,
If the garage door responds to the Homelink, your done! If not, your garage door uses a rolling codes transmitter and must be trained.
Find the training button on your garage door opener's transmitter (usually mounted on the ceiling). Press the training button and within 30 seconds press and release the programmed Homelink button twice. If the garage door opener operates, you're done! If not, press and release the Homelink button a third time and the garage door should respond. If it still does not, you may have a very old garage door opener with a none digital transmitter (like I did). In that case, you either need to buy a new opener or try to replace the transmitter with a modern digital unit (as I did). Advantage: cheaper than a whole new garage door opener.
Disadvantage: The newer openers incorporate safety features that my old opener does not have.

Posted on Jun 09, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can i program my garage door opener in my 2007 dodge gran caravan


Below are the steps to program your garage door opener/Homelink on your vehicle. Try these steps first but if the vehicle has been programmed before there is another set of steps to use but this should work. If you need an owners manual for your vehicle feel free to email me csautomotivecars@att.net with your make, model and year. I will be happy to email you a copy and no there isn't a cost for it. If you have a size limits on downloads on your email program just to let you know this is a large file as far as owners manuals go (17MB). Just a heads up if you want the owners manual. I hope this helps.....


9_23_2012_9_15_01_pm.jpg9_23_2012_9_15_14_pm.jpg9_23_2012_9_15_26_pm.jpg9_23_2012_9_15_40_pm.jpg9_23_2012_9_15_51_pm.jpg

Sep 23, 2012 | 2007 Dodge Caravan SXT Minivan New Cars

1 Answer

Cannot program garage door transmitter


Depending on the type of vehicle home remote system you have and the type of garage door opener installed will determine how you program the system in your vehicle.
Below is a web address for the owners manual to your Buick. It will show you step by step how to set your Buick's remote system to open your garage door.
Good luck.
Regards,
http://www.extendedgmwarranty.com/owners-manual/buick/2007-Buick-Rendezvous.pdf

Sep 08, 2009 | 2007 Buick Rendezvous CXL SUV

1 Answer

Need to program/link garage door opener with the one on the visor in the car


Depending on the name brand of the garage door opener, there is a button on it you press and you have about 30 seconds to set the button in the car to the signal. Read you car manual on how to set the visor opener, probably press and hold the button in after pressing the button on the garage door opener motor. Get someone to help you in the garage on a ladder. Mine is a Sears and this is how it works.

May 29, 2009 | 2006 Audi A4

1 Answer

Program garage door opener in 2000 lincoln navigator


owner manual has instructions. Your garage door opener changes codes every time it is used so you need to push a button on your door motor and then run back to car to program while the door motor is willing to accept programming.

Apr 07, 2009 | 2000 Lincoln Navigator

1 Answer

Setting garage door opener


Most openers are programmed the same. You normally program the house garage opener to accept the new remote. Your garage opener will have a button to press to add in a new remote. Normally you press this and then press the remote in the car and hold until your lights on your opener flash or the garage door closes. (check your manual on your garage door opener)

Mar 27, 2009 | 2005 Chevrolet TrailBlazer

2 Answers

Program my garage door opener on my pontiac montana 2005


you probably have a garage door opener that changes the code after each opening. I had to push a button on the door motor and then run to the car and push the opener button within 15 seconds. Your car salespwrson is usually an expert at this.

Mar 21, 2009 | 2005 Pontiac Montana SV6

2 Answers

How do you program the garage door opener on a 1997 buick riviera. Bought it used, no owners manual.


You'll need to open the transmitter in the car and match the frequency to the garage door reciever, assuming you have the fob for the garage door, opening this will reveal a set of tiny switches. This combination is the frequency you need. Open the transmitter in the car, and place all of it's switches in the same position as in the fob. If this doesnt work, then the governing frequency isn't the same and there's not much you can do. Hope this helps!

Mar 10, 2009 | 1997 Buick Riviera

2 Answers

Universal garage opener


The solution is in the owners manual.If you want to program the "homelink transmitter" in your car,you will need a remote unit for your garage door opener to do this.It is fairly easy and straightforward.I programmed my 07 Pac and it works great.Good luck!

Mar 08, 2009 | 2005 Chrysler Pacifica

1 Answer

How can I program my 2001 volvo to my garage


The owners manual has the procedure for the programming and the number for "homelink" customer support to help with rolling code garage door openers.

http://www.volvocars.com/us/tools/OwnersInfo/Pages/VolvoOwners.aspx

The above website has an online owners manual. Just register and click on YOUR VOLVO then click on SEARCH OWNERS LIBRARY.

hope this helps.

Feb 21, 2009 | 2001 Volvo V70

1 Answer

Program car to garage opener


on the garage door opener there is a button, that is called the" learning button "you press that button until light blinks, then within 20 seconds press the open button inside car.

Feb 01, 2009 | 2008 Hyundai Sonata

Not finding what you are looking for?
Cars & Trucks Logo

2,531 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexus Experts

yadayada
yadayada

Level 3 Expert

79865 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

918 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Are you a Lexus Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...