Question about 1994 Dodge Dakota Club Cab

1 Answer

Where is the crank sensor located on a 94 dodge dakota 2wd 318? We are not getting any spark, already replaced computer, egnition coil, rotor coils; yet still not spark. Someone said it may be the crank sensor. Any other suggestions?

Posted by on

  • jwinte Apr 20, 2009

    We are not getting any codes even after we changed it. any suggestions on what it may be?

  • Mike Butler
    Mike Butler May 11, 2010

    Center of engine at rear, above tranny bell housing , on upper engine block area. Are you getting any trouble codes from it.

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Dodge Master
  • 14,036 Answers

Look on the left side midway lower botom.

Posted on Apr 20, 2009

  • Jonah Oneal Apr 20, 2009

    check power distribution center.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

There is no spark to coil but the truck will turn over just not fire.


there is a crank position sensor on your dodge. it is located on the top of the transmission on the drivers side

Dec 29, 2012 | 1990 Dodge Dakota

1 Answer

94 Dodge Dakota no spark no fuel


replace pickup coil in the distributor

Apr 27, 2010 | 1997 Dodge Dakota

1 Answer

98 dakota 2wh drive 3.9 replace rotor & cap


Check this 1998 Dodge Dakota 2WD 3.9 liter V-6 VIN "X"

fc3f7cc.gif

Good luck.

Jan 16, 2010 | 1998 Dodge Dakota

1 Answer

I have 1992 Dodge D150 with 318 magnum. It won't


is this vehicle fitted with a chipped key ?? iam thinking factory immobilisor here?? but not sure what year it was introduced in america

Nov 22, 2009 | 1993 Dodge D150

1 Answer

I have a 1999 dodge durango, bad motor I changed it I am not a dodge person. The motor I bought to put in , was supost to be a 99 318, I find out after I put it in it is a 1994 360. need less to say I have...


MAKE SURE THAT YOU CHECK OUT ALL OF THE WIRES GOING TO AND FROM THE COIL AND IF THEY ARE ALL HOOK UP TAKE THE COIL TO THE PARTS HOUSE AND HAVE THEM CHECK IT OUT FOR YOU

Nov 12, 2009 | 1999 Dodge Durango

5 Answers

1995 dodge dakota 2wd 3.9 no spark to plugs,or coil,orfuelpump


First of all let's explain how the spark gets to the plugs. There is a crankshaft position sensor and a cam sensor. They are what determines when to fire the coils and injectors. The crank sensor is located on the passenger side on top of the bellhousing, the cam sensor is the pickup plate in the distributor. As the engin turns the send refernece pulses to the computer which grounds and ungrounds the ignition coil causing it to discharge and send voltager from the secondary coil wire to the center tower in the distributor cap. The rotor button recieves the voltage and distributes it to the 6 towers (1 for each cylinder) If you say you're getting spark from the rotor that tells me the primary side of the ignition system is working, and the secondary side is working into the distributor cap. I'd check for spark out of the plug wires at the plugs. Pull a wire and insert a #2 phillips screwdriver into it, hol the shaft of the screwdriver aprox 1/8"(no more) from the exaust manifold and observe the spark as someone turns over the engine. You should see a nice blue spark. If theres spark, spray a little gum cutter in the throttle body an crank it, if it fires you have a fuel problem. Install a fuel pressure gauge on the schrader valve on the fuel rail and observe it as you crank it. If theres no fuel pressure maks sure there's fuel in the tank, if so climb underneath and beat on the bottom of the tank with a rubber hammer, the pump may be going bad, sometimes you can jar them and make them run.

Aug 24, 2009 | 1995 Dodge Dakota

3 Answers

1992 dodge 318 engine turns over, but no start. No spark present. Replaced ignition coil and pickup coil, still no spark. 1992 dodge ram 150 full size truck 318 engine. starts sometimes then wont start...


if truck has a ceramic ballist resistor near and connected to coil this could be problem or the crk posistion sensor could be too, i would change ballast first if you have on your truck appx cost $10

May 09, 2009 | 1992 Dodge Ram 150 Club Cab

2 Answers

'95 Dodge Dakota, 318 cu. in. no spark


There is a sensor that located on the right side of trans. that goes into bellhousing up close to the engine, it runs off the flywheel i think its the crank sensor but i'am not sure, i had a simmler problem with one i was working on, replaced that and it ran.

Apr 09, 2009 | 1995 Dodge Dakota

Not finding what you are looking for?
1994 Dodge Dakota Club Cab Logo

568 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8522 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...