Question about 1990 Ford Bronco

1 Answer

Tailgate regulator...can't get to it because window is down

Rear window (tailgate)....regulator needs to be replaced but the window can not be put up so i can get to the regulator any ideas?..please

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Open the tailgate... pull the window up with your hands, and take out the gear. its a round plastic gear and i had the same problem... mine was completely shattered and its about 12 bucks to replace

Posted on Apr 29, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How to fix my rear tailgate window


check the fuse/relay. if it is neither of these check the switch with a multimeter. If you can hear the motor trying to move the glass when you try the switch it may be the regulator needs attention. It may be the motor needs to be replaced.

check fuse and relay along with the switch first then the regulator and motor afterwards. Replacing the small electronics is obviously easier than having to open up the tailgate to check the mechanics of the winedow.

Sep 13, 2015 | 2004 GMC Envoy XUV

1 Answer

How to change accurator on rear window


That would be a regulator. My best advice is, if you have to ask....you really need to find someone that knows what they are doing. The rear tailgate glass is pricey and getting hard to find on most models that use them.

Jun 08, 2015 | Cars & Trucks

3 Answers

My back automatic window went down and now won't come back up. No sound from motor. Checked fuses. Even took back seat apart but don't know what to do or what caused it. How can I get window to go...


it may need to be reset.

SECTION 501-11: Glass, Frames and Mechanisms 2001 Explorer Sport/Sport-Trac Workshop Manual
GENERAL PROCEDURES Rear Window Motor Initialization s1r~us~en~file=ani_caut.gif~gen~ref.gif CAUTION: Make sure that no obstructions are present in the power rear window system when carrying out this procedure.
NOTE: This procedure must be carried out when repairs are performed on any part of the power rear window system including when: the power rear window motor is removed from the window regulator drum housing, a new power rear motor is installed, a new power rear window regulator is installed, a new power rear window module is installed, and any operation in which grease or lubricants are applied to the power rear window system.
NOTE: All power rear window components (window glass module, window regulator, window motor, and glass runs) must be installed and torqued to specification before carrying out this procedure.
NOTE: Steps 1-6 must be completed within 30 seconds. The entire procedure must be completed within five minutes.
NOTE: Once the ignition key is turned to the ON position in Step 6, it must remain on until the entire procedure is completed.
NOTE: Steps 7 and 9 require that the power rear window control switch be held in the closed position until the power rear window motor stalls the window in the upper header seal. Step 8 requires that the window control switch be momentarily turned to the open position.
  1. Start with the ignition in the OFF position.
  1. Turn the ignition to the ON position.
  1. Press the power rear window control switch vent button six times.
  1. Turn the ignition to the OFF position.
  1. Press the power rear window control switch vent button six times.
  1. Turn the ignition to the ON position. The power rear window will move up-down-up-down approximately 20 mm (0.8 in). This movement indicates that the power rear window motor has entered initialized mode.
  1. Rotate and hold the power rear window control switch to the closed position until the window stalls in the upper header seal.
  1. Momentarily rotate the power rear window control switch to the open position and release. The power rear window will carry out a one-touch down operation until the window stalls at the bottom of the travel stop designed into the window regulator.
  1. Rotate and hold the power rear window control switch to the closed position until the window stalls into the upper header seal. Once this operation is complete, the window will move up-down-up-down approximately 20 mm (0.8 in). This movement indicates that the power rear window motor has been successfully initialized.
  1. Verify correct operation of the power rear window by moving the window to the fully open, vent, then fully closed positions.
------------------------------------------------------------------------------------
  • The power rear window is inoperative (Explorer Sport Trac only)
  • Circuitry.
  • Battery Junction Box (BJB) fuse 3 (30A).
  • Central Junction Box (CJB) fuse 20 (7.5A).
  • Power rear window control switch.
  • Rear window glass motor.
  • Go To Pinpoint Test K .

------------------------------

Sep 15, 2011 | 2001 Ford Explorer Sport Trac

1 Answer

My rear window won't operate. Can I manually lower the window? The dash switch nor the outside tailgate switch will operate the window. No blown fuse. What could be the problem?


Have had a few of these broncos, the rear window motor burns out on those pretty frequently. Check to see if you have power to the motor before replacing it but if your fuse is good and its not working then pretty sure it is the motor. There isn't a way to manually crank the window up but you can open the tailgate up to get to the internal components and disconnect the regulator from the glass then you can manually put the glass up and use a wedge of wood to hold the glass up. The proper fix is to replace the window motor.

Mar 18, 2010 | 1991 Ford Bronco

2 Answers

I have an electric rear window in my tailgate that won't go back.


Yes you can unbolt it from the regulator that it rides on. You should see a couple of bolts holding it in place unbolt it and pull it out so you can work on everything and then put back in.

Oct 07, 2009 | 1987 Chevrolet Blazer

1 Answer

Back window off track


before you go and buy anything,it may be a good idea to open the rear door panel and see if the window just came of the rail guides on the regulator,there are two white small wheels on the regulator that ride on a guide rail attached to the window this rail is attached to the window by two rivets or bolts,just take the cover panel of and see what is the matter in there. here ara steps to get there.

  1. Remove the assist strap hole cover, bolt and assist strap.
  2. Using a screwdriver, remove the back door trim cover.
    NOTE Tape the screwdriver tip before use to avoid damaging the trim pieces.
  3. Remove the plate and disconnect the electrical connector.
  4. Remove the back door glass.
  5. Remove the window regulator and glass guide rail.
  6. Installation is the reverse order of removal.

Sep 08, 2009 | 1991 Toyota 4Runner

2 Answers

1994 Toyota 4Runner, Rear window goes down on one side but not the other and then won't go back up. The key and the console button both work but I heard some sort of metal component inside the tailgate...


Sounds like something just fell apart inside. Probably just a roller or something. If you can't do it yourself, it shouldn't cost too much. Just make sure you stand there and watch, so you don't get ripped off. In fact, if you take the cover off the inside of the tailgate, maybe you can fix it yourself.

May 08, 2009 | 1995 Toyota 4Runner

1 Answer

Replace motor on tailgate window on a 1987 ford bronco


You will likely have to remove the panel from the inside with the window up. Once you have the panel off I would try to have some one hold down on the switch while you tap the motor with a hammer. Of course make sure the latches are all the way closed as if the door is not closed all the way the window will not roll down as it has safety switches to keep this from happening.

If you still can not get it down then you will need to unbolt the regulator and let it down that way.

Jan 14, 2009 | 1987 Ford Bronco

4 Answers

Back door wont open and window wont go down


The rear window has to be completely down in order to move the tailgate! You should be happy that your window is stuck up, unlike mine which is stuck all the way down! I have to completly take apart my tailgate!! If you want to try a trick to get the rear window down, my bronco has a rear window switch right next to the headlight knob, take the 2 purple wires on that window switch, and cross them, if your motor still works and if the wires are good, that should make the window go down!!! good luck, hope that helps!

Oct 05, 2008 | 1995 Ford Bronco

Not finding what you are looking for?
1990 Ford Bronco Logo

Related Topics:

163 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5471 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...