Question about 1992 Geo Prizm

1 Answer

The radiator fan on my 1992 Geo Prizm will not come on. I have tested the fan motor via a wire by pass and confirmed the motor is good. I have also replaced the relay and still the fan will not come on. What should I do next?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 54 Answers

Pull the cooling switch/sensor Usually the one next to or on thermostat housing. I do believe it a 2 wire. the 1 wire is for your guage. I think you can short it and see if it comes on. take a wire and plug into each other creating a complete circuit. if it comes on then replace the sensor which I think is your issue anyways.

Posted on Apr 15, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is engine fan fuse on 1991 geo prizm?


toyota corolla. it is.
but that depend on what engine option
the cooling systems totally vary by engine.
also with or with out air conditioning......???? it too can turn on this fan!
look it up on alldata.com
buy the FSM book
or
post engine, size. better the real engine name off the hood sticker
works BEST.
the 7a was offered in 1992 first. my guess is the fuse is a guess. right? of the 4 possible.?
bad FAN (hot wire it to test it) bad wires, bad 194F switch.
a FAN relay, a fan on the black red wire. relay to fan.
or a stuck open 194F engine coolant temp switch, a voltmeter finds this in 5min work. but depends on if A/C or not.


fuse, there is 30amp fuse link, marked fan
there is

Aug 11, 2014 | 1991 Geo Prizm

1 Answer

1995 geo prism is heating up


Have a coolant system pressure test done to check for system leaks. check coolant level at the radiator cap. have a compression test done to check for head gasket or cracked head.. Check fan operation and if you have a viscous fan hub replace it . Have a flow test done on the radiator to check for blocked cores.

Oct 27, 2013 | 1992 Geo Prizm

3 Answers

1992 geo prizm - radiator hose broke and replaced, but car won't start now - ideas?


you said it cranks then you said it wont turn over if it wont turn over you might have get the engine to hot and seized the engine please spesifiy if the engine turns over or not

Jun 09, 2012 | 1992 Geo Prizm

1 Answer

1992 Geo Prizm/Corolla 1.6 L 120k mi, Fan 1 intermittent


what is the problem?
is your car overheating?

Apr 28, 2010 | 1992 Toyota Corolla

1 Answer

1992 Geo Prizm fan


your relay fuse is going bad replace it asap or your going to have to replace your head gasket next

Jan 21, 2009 | 1992 Geo Prizm

2 Answers

Blower motor location 1990 geo prizm


In my 1992 it is underneath the dash on the passenger's side, but you have to take the whole front panel including the glove box off to access it. When that is done there is a rectangular housing and a more circular housing. On the bottom of the circular housing there are three screws that hold the blower motor up. Remove the screws and it will drop right out.

Dec 14, 2008 | 1990 Geo Prizm

1 Answer

Fan runs all the time when car is on


I did the same thing and had the same problem. I believe I replaced a ten amp fuse in the engine compartment and fixed it. Really pissed me off.

Oct 27, 2008 | 1990 Geo Prizm

1 Answer

Geo prizm 95' engine light on - code 24 - air intake temp. sensor has no power


use an electrical tester with a sharp point tip, and poke through the coating into the wire at every 5".

this is the best wat to test the wiring.

Sep 04, 2008 | 1990 Geo Prizm

2 Answers

1990 Geo prizm


I MOVE THE FUSE AROUND INSIDE THE CAR LAST NIGHT.....THIS MORNING THE CAR WOULD NOT CRANK ....LIGHTS ,HORN IS GOOD....THIS IS ON A 84 GEO PRIZM....

Jun 05, 2008 | 1990 Geo Prizm

Not finding what you are looking for?
1992 Geo Prizm Logo

Related Topics:

344 people viewed this question

Ask a Question

Usually answered in minutes!

Top Geo Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8195 Answers

Are you a Geo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...