Question about 1991 Buick Park Avenue

1 Answer

2002 buick park avenue. Wiper blades go ro the

2002 buick park avenue. Wiper blades go to the "up" position when turned off. The car is equiped with the moisture sensor and has not done this before. Is they re a "reset" button, or some way to get them to end in the down position?

Posted by on

  • Rita Shumate Apr 15, 2009

    No they weren't. They had been working fine until this week

  • Anonymous Mar 25, 2014

    wipers only on intermittent and wont go down to park position. i have replaced accessory switch. thank you

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Were they stuck at any time?

Posted on Apr 15, 2009

  • rdep10 Apr 16, 2009

    alot of times, the little finger under the cam that mounts on the wiper motor to the transmission that bends and the wipers will stop in the up position.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2002 Park Avenue my turn signals do not work my flashers work


gmlogoflat.gifService Information
2002 Buick Park Avenue ' Park Avenue (VIN C) Service Manual ' Body and Accessories ' Lighting Systems ' Description and Operation ' Document ID: 643323


Turn Signal/Cornering Lamps
The HZDT/SIG fuse in the fuse block - underhood - left supplies battery positive voltage to the turn signal/hazard flasher module and have ground at G202. The turn signal lamps may only be activated with the ignition switch in the ON or ACCY position. The T/SIG fuse in the fuse block - underhood - left supplies battery positive voltage to the turn signal switch. When the turn signal switch is placed in either the left or right position, current flow is from the turn signal switch assembly to the turn signal/hazard flasher module. The turn signal/hazard flasher module then sends an on-off voltage signal to either the left or right turn signals and their instrument cluster (IPC) indicator. When the hazard switch is pressed, all the turn signal lamps will flash including both IPC turn signal indicators. The left turn signals have ground at G106, G400 and at G402. The right turn signals have ground at G105 and G400. The turn signal switch supplies battery positive voltage to the cornering lamps, the left cornering lamp has ground at G105 and the right cornering lamp has ground at G106.
+snpvvsvwho06+5aqhepgaaaabjru5erkjggg==










2002 Buick Park Avenue ' Park Avenue (VIN C) Service Manual ' Body and Accessories ' Lighting Systems ' Description and Operation ' Document ID: 643323

May 10, 2016 | Cars & Trucks

1 Answer

How do you change the driver name and memory for seat and mirror adjustment on a 1997 buick park avenue ultra


I am not sure about changing the name as my 2000 park ave. only indicates driver one or driver two. To reset the memory for seat/ mirror position is rather simple: with the ignition on and the car in park, adjust your seat and mirrors to the desired position. Then press and hold the desired button (driver one or two) until you hear a beep, This is the procedure that works on my 2000 park ave. I hope this helps you.

Jun 21, 2014 | 1997 Buick Park Avenue

1 Answer

How do i remove wiper blades on my 1995 buick lesabre?


very simple.

pull the wiper blade up and look at the connector to the wiper arm..you will see a small little tab depress it and pull the wiper blade off the arm

Feb 06, 2010 | 1995 Buick Park Avenue

1 Answer

Wipers willnot return to park position


I've fixed this problem before. You have to disconnect the wiper transmission from the wiper motor. Put wipers in off position, unbolt the plate on top of wiper, turn wipers on then off. In the off position see where the wiper transmission is position in relation to where the park position is, remove the top plate from wiper motor and position it so as to be able to reconnect the wiper transmission now in the proper place. Please keep me informed. thanks you

Jun 03, 2009 | 2002 Chevrolet Impala

1 Answer

2002 Buick Regal wiper motor parks wrong on dlay


remove cowling under hood to expose wiper motor linkage. You have to try it many times but the linkage may not be attached in the correct arc position. Trial by error.

Apr 22, 2009 | 2002 Buick Regal

1 Answer

How to change the wiper blade on buick park avenue model 2001


i presume you mean the blade... just to give you better access... turn on the key.... turn on the wiper... when it gets where you want... shut off the key

Robert

Dec 26, 2008 | 2001 Buick Park Avenue

Not finding what you are looking for?
1991 Buick Park Avenue Logo

Related Topics:

276 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7726 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...