Question about 1993 Geo Metro

2 Answers

Loose steering The steering on my 97 geo metro lsi is getting sloppier every few days. I can't find an adjustment for it.

Posted by on

  • Anonymous Mar 23, 2014

    Airbag removal 97 geo metro

×

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 5,158 Answers

You need to check the tie rods

here's a good video on how to check them

http://www.ehow.com/video_4774869_check-tie-rod-ends.html

robert

please take a moment to rate this solution thanks

Posted on Apr 15, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 32 Answers

How long has it been since you checked the oil in the gearbox? If you don't check on it then the gears can be damaged: this will cause permenant loose steering. i believe that there is an adjustment for the steering wheel aim at the gearbox, but if it's loose then the steering wheel wan't do anything at all.
Hope this helps!

Posted on May 31, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

COMPUTER CUTTING OUT, STOPPING CODES


Should get this checked out professionally before you ruin something.

May 05, 2018 | Geo Cars & Trucks

1 Answer

Egr not working 97 geo metro lsi


H3LL most of those old 90s car it does not work now.
(ive cured many) (some take 5hours hard labor De-carbonizing the thing)

how do you know that,?
guess:
1 P0400 DTC errors?
2 pinging?
3 fails smog?,,.
is it too hard to tell the story>?

This is Suzuki swift if you had not notices
open hood lookup see that sticker, says SUZUKI
clear as day, and means parts more easy to find.
In the USA we got G engines. G10,G13 top sizes
all suzuki's this era
have horrible Rube Goldberg EGR
vacuum and cat backpressure, magic,err horrors
test 1.
find the EGR main,
see rear and the skeleton-ized frame?
hot engine, we use vacuum tool on its nipplefitting
and it stalls the engine or near, 800 goes to 400. rpm.
that means the 5hour labor part is ok.
leaving vacuum parts or electric VSV

if the diaphram fails to move the valve is bad.
if it moves fully (1/4" or more ok.
so remove it, and clean the carbon seen here.
valve ports. put back pass stall test now?
if hot the hidden exhaust path is blocked.

end, im not doing the vacuum/elect, cat pressure side now.. until you report stall test results.
this test here 1 test cuts the job in half.

Feb 12, 2017 | Geo Cars & Trucks

1 Answer

1996 Geo Metro LSI 1.3L Has issues starting. It cranks but won't turn over just replaced it March 2 2013


Check your battery connections at the starter. It may not be getting the needed volts. Just make sure they're clean and tight at the starter and the battery both. Good luck!

Sep 30, 2017 | 1996 Geo Metro

1 Answer

Headlights keep flickering


Check the wiring to the headlight. Maybe where the headlight wires meet the headlight are loose. Sounds like a wiring issue.

Jun 18, 2010 | 1997 Geo Metro

1 Answer

My 97 Geo metro is slight noise from rear wheel now play in steer


Have the rear wheel bearing checked and check the outer tie rods checked for play.

Mar 15, 2010 | 1994 Geo Metro

1 Answer

Do the valves need to be adjusted on a 92 geo metro lsi


No. Geo Metros use hydraulic lifters which can not be adjusted. If you Metro is making excessive valve noise, the lifters are probably worn out or the oil level is low.   

Feb 27, 2010 | 1992 Geo Metro

2 Answers

My 1997 geo metro sqeals when started


this could be the serpentine belt at the front of the engine it could be warn and needs replacing, but this could also be the signe of a warn bearing ie idler bearing, waterpump bearing, alternator bearing, power stearing pump bearing, best to get it checked, as a belt is only a few bucks, where as the others could be allot more, should i say will be...hope this helps

Feb 12, 2010 | 1997 Geo Metro

1 Answer

High-beams not working


U are going to have to replace the mulitfunction switch if the bulbs are not the problem

Nov 16, 2008 | 1995 Geo Metro

Not finding what you are looking for?
1993 Geo Metro Logo

Related Topics:

254 people viewed this question

Ask a Question

Usually answered in minutes!

Top Geo Experts

yadayada
yadayada

Level 3 Expert

80407 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Mike Gilbreath

Level 1 Expert

50 Answers

Are you a Geo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...