Question about 2006 Peugeot 405

1 Answer

Dash lights stay on wen ignition of and the key is out and the ignition want stop enigine pug 306 1.9td

Posted by on

  •  Stuart Chettleburgh

    I have a similar problem with my 306 td you can remove the key and the car keeps running ,you have to stall it to stop the engine then disconnect the battery, because the stop light oil light and handbrake light stays on , I have checked everything you can think of , I thought it might be a bad earth , but I can't get to the root of the problem .

    When I do i will let you know .

    Unless anyone else has had this problem and can shed some light on it ....

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 22 Answers

Right I have sorted the problem ,I can tell you exactly what it is ,
On the right hand side of the radiator down the bottom there is a plug and socket ,which runs the cooling fans for your rad .
this plug and socket is susceptible to the ingress of water ,and basically causes the wire to short across causing the problem .
If you have caught yours in time you may be able to clean out the crud and spay with electrical cleaner .
Mine was too far gone I had to cut the wires and rejoin the with chocolate block connectors ,I wold have preferred to solder them together but there is no room unless you want to take half the car apart .
Even doing it my way was a pain .
If you get stuck give me a shout .

Posted on May 02, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

On my 2002 Trailblazer, when I start the engine, all my dash warning lights on and gauges stop working, the speedo and tach still work.


There is a known problem with the ignition starter switch that causes this, this is the switch that the ignition key operates when you turn it.

Sep 25, 2016 | 2002 Chevrolet TrailBlazer

1 Answer

I have a dyna 91 glow light gos straight of wen you trun key on not starting


I suspect faulty glow pugs
they have a limited life time usage
if no better
fuel pump
if still no start
when engine is high in km check cylinder compression

da0658e8-015c-47ae-91a0-03c7f39e982a.jpg


26279569-zmyav5vy5vkw1lhnycsx4z12-4-2.jpg

Sep 10, 2016 | Toyota Cars & Trucks

1 Answer

1997 xauxhall arena 2.5 diesel just stopped


Start with checking battery probably dead if headlights dont burn bright

Sep 29, 2014 | Cars & Trucks

2 Answers

Light with ebgine symbol in top righthand cornerinstrument cluster lights dash


Thats ur check engine light. check all ur fluids oil/transmission/coolant or antifreeze. If light stays on then see a mechanic, and they have a machine that pugs into ur car and tells you whats wrong

May 31, 2013 | 2000 Ford Explorer

1 Answer

How u fix code po303 passat 2001


i still have same code po303 i have change spark plugs and coil i add a ground wire i can resat end drive for 20+ milages no check enigine light
turn off start up runs for minute or so then coms back on check enigine light same po303 enigine runs very smoth no vibration what so ever I AM LOST

Feb 16, 2013 | 2001 Volkswagen Passat

1 Answer

How do I program my key for my 2006 Chevy Impala?


Add Duplicate Key (PK3 or PK3+ key)
1. Insert an existing key into the ignition cylinder.
2. Turn the ignition cylinder to ON (RUN) and back to OFF.
3. Remove the existing key and, within fifteen seconds, insert the new key
and turn it to ON (RUN).
4. The security light will light up for two seconds to indicate success in programming
the key into the vehicle.
Originate New Master Key (PK3 or PK3+ key)

1. Insert new key into ignition cylinder and turn it to the ON (RUN) position.
The security light on the dash will illuminate and stay on for ten minutes.
2. When the security light goes out, you have one minute to start the next
step. Turn the ignition cylinder to OFF and then back to the ON (RUN)
position. The security light on the dash will illuminate and stay on for ten
more minutes.
3. When the security light goes out, you have one minute to start the next
step. Turn the ignition cylinder to OFF and then back on the ON (RUN)
position. The security light on the dash will illuminate and stay on for ten
more minutes.
4. After the security light has gone off the third time, the key has been programmed
into the vehicle’s computer and will operate the car. It has replaced ALL the
previous electronic key codes and is the ONLY key programmed into the
vehicle’s computer.

Add Duplicate Key (PK3 or PK3+ key)

1. Insert an existing key into the ignition cylinder.
2. Turn the ignition cylinder to ON (RUN) and back to OFF.
3. Remove the existing key and, within fifteen seconds, insert the new key
and turn it to ON (RUN).
4. The security light will light up for two seconds to indicate success in programming
the key into the vehicle.

May 20, 2009 | 2006 Chevrolet Impala

2 Answers

2002 F150 starting issue


sounds like you might have a problem with your ignition switch, it's sticking and acting like your key is in when it's out.

Mar 02, 2009 | 2001 Ford F150 Styleside SuperCrew

1 Answer

Engine won't shut off '91 Escort GT


Check the fuse box is not full of water.
Thet suffered from leaking windscreens, and it filled the fuse box.
If not, you are looking at a faulty ignition switch.

TL

Feb 12, 2009 | 1991 Ford Escort

1 Answer

Jaguar s/type wont start had flat battery now replaced x.reg 2000


Yes the key needs to be reprogramed to the car. Unfortunately that will have to be done by the dealer. Make sure that you have plenty of proof that you are the owner. They will reprogram it but you will not take posession of the car until you prove it is yours.

Dec 26, 2008 | 2000 Jaguar S-Type

Not finding what you are looking for?
Cars & Trucks Logo

385 people viewed this question

Ask a Question

Usually answered in minutes!

Top Peugeot Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

mike hayward

Level 2 Expert

279 Answers

lloyd cole

Level 2 Expert

250 Answers

Are you a Peugeot Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...