Question about 1989 Chevrolet Corvette

2 Answers

How do you get the shift knob off a 1989 corvette automatic

I would to replace my black shift knob , the button in the middle is fine , but the knob itself was warn badly. 1989 corvette .. Thanks to the person who answered my air conditioner question it really helped :) also where do you get touch up paint my paint code is u68? dark metalic red. you guys are great......

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 126 Answers

Pull plastic push button up to remove. there is a snap ring that holds shifter knob on. remove snap ring pull knob up.

Posted on Apr 16, 2009

  • mary allman Apr 16, 2009

    pull plastic push button up to remove. there is a snap ring that holds shifter knob on. remove snap ring pull knob up.

×

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

THE CRUSE CONTROLE CABLE IS DISCONECTED HOW DO I RECONECT IT.

Posted on Jan 10, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Automatic gear shifter n button stuck


Help!! My automatic shift knob is stuck. - AnandTech Forums

forums.anandtech.com > Social > The Garage

AnandTech
Nov 1, 2007 - 8 posts - ‎5 authors
The button that one would push in in order to move the shift knob is stuck and will not respond. Any ideas would be great, thanks.

How To Repair / Replace A Broken Or Stuck Shifter Shift ...

? 5:31
https://www.youtube.com/watch?v=gRPG8D7Pa-U

Jan 28, 2016 | Cars & Trucks

1 Answer

Should 2004 Cavalier's climate control knobs & power window buttons light up. ? I'd like to replace the bulb or fuse if its possible


The bulbs in the control head for the heater/ac are nor serviced by GM but I think you can purchase them at radio shack if you can get the head out and apart I am pretty sure you can replace them.

Jan 09, 2016 | Chevrolet Cavalier Cars & Trucks

1 Answer

Shifting from 1 to 2nd second seams blocked sometimes. Downshifts fine?


Sensor which sends signals to tranny to shift could be going out

Nov 01, 2013 | 1989 Chevrolet Corvette

1 Answer

Heater on my 89 corvette will not turn off ?


replace the blower module if you have automatic airconditioning

Dec 26, 2010 | 1989 Chevrolet Corvette

1 Answer

Need to install new leather knob cover


Hello, I can help you with this. With a tiny screwdriver you gently pry up on the button in the middle of the old knob. Work slowly, pry up a little at a time on the front and then the back until the button comes out. Back and forth. If you look inside you will see a snap ring, you can use snap-ring pliers to remove it or some sort of sharp pick or a screwdriver, CAUTION, when it releases it may spring into outer space never to be seen again. Then just pull the old knob off and install the new one. Good luck and if you have any other questions about this just leave a comment.

Mar 10, 2010 | 1989 Chevrolet Corvette

1 Answer

How do I remove the shifter boot off a 1989 corvette automatic? I am trying to replace the old worn boot with a new factory spec leather boot purchased from Eklers.


You must use a small screwdriver to pry off the button very carefully and you will see the pin and retainer. Good luck,don6667@hotmail.com

Dec 11, 2009 | 1989 Chevrolet Corvette

1 Answer

The passenger head light on my 89 corvette doesn't open but if i turn the knob on the headlight motor it may work once or twice and then it won't work again


this is a common problem mine does it the gears in the motor are stripped look on ebay a u can buy replacment gears with instructions.

Oct 21, 2009 | 1989 Chevrolet Corvette

1 Answer

How do you remove the shift knob?


if it is a automatic remove the button by pulling or prying up on it underneth the button
is a snap ring you will need snap ring pliers
spred the snap ring open and pull it up then the knob is free to pull up be sure to remove the counsle upper plate so the boot can come up with the knob

Jun 21, 2009 | 1989 Chevrolet Corvette

1 Answer

1989 cherokee limited automatic door locks don't work


spray the inside of the latch on the inside of the doors with wd40, i had the same problem, and it turned out they were just gunked up with a ton of ****.

Nov 11, 2008 | 1989 Jeep Cherokee

Not finding what you are looking for?
Cars & Trucks Logo

839 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...