Question about 2000 Jeep Grand Cherokee

1 Answer

No brake lights on 2000 jeep grand cherokee limited

I have replaced the light bulbs, ckecked the fuse. I removed the stop light switch but it has 6 pin connectors and I do not know what to jumper to check brake lights.

Posted by on

  • 1 more comment 
  • toneychaney Apr 15, 2009

    The brake switch has 6 pin connector where it plugs into the brake switch and I do Know what pins to jumpered for the brake light check

  • yadayada
    yadayada May 11, 2010

    use a 12 volt test light to find 12 volt soruce and ground.

  • yadayada
    yadayada May 11, 2010

    is there 12 volts at the brake light switch? if so jumper that to connector ground.

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 209 Answers

If you have a park light working change your stop light switch it is broken.

Posted on Apr 15, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2000 grand Cherokee Laredo v8 all my brake lights went out checked the bulbs fuse and brake switch all are good the tail and signal lights are good. what should I do nextto fix the problem


Have you checked the brake light fuse to see if there is power at the fuse and out of the fuse, also check the brake light switch for power in and out when the pedal is pressed, do that and get back to me.?

Oct 26, 2016 | 2000 Jeep Grand Cherokee Laredo

1 Answer

Does the 2000 jeep grand cherokee have a lamp outage module


If you have no brake lights, and you've checked the fuses and the bulbs then, the problem is likely a the brake light switch on the brake pedal arm. The switch needs to be adjusted or replaced.
Hope this helps.

Feb 23, 2015 | 2000 Jeep Grand Cherokee

2 Answers

Brake lights dont work


Check the brake light switch, it is down on the brake pedal lever, you can dis-connect the wire connector at the brake light switch and check for broken wires at the connector, and then jumper the connector with a paper clip, if the brake lights come on then replace your brake light switch.

There might be more than one switch attached to the brake light pedal lever, the brake light switch usually only has two wires going to it when there are two switches.

If there is no problem with the brake light switch then you can suspect the turn-signal switch to be at fault, as all of the running lights, turn-signals, brake lights, and hazard lights are all ran through the turn-signal switch. You can also try stepping on the brake pedal and wiggle around the turn-signal switch and see if the brake lights flicker or come on.

Apr 26, 2010 | 2000 Jeep Grand Cherokee

1 Answer

My 2000 jeep brake lights don't work but the rest do all bulbs are good


check the brake light fuse with a test light on both sides of the fuse,if it is good use the test light to check for power at brake light switch,then push on pedal while using test light to see if power is going out of stop light switch in the other wire,

Jan 12, 2010 | 2000 Jeep Grand Cherokee

2 Answers

1997 Jeep grand cherokee


Sounds like your brake light switch needs to be replaced.  It is attached to the brake pedal and should cost you around $20 from an auto parts store.  If the fuses and bulbs are good there is a 99% chance it is the brake light switch.  Hope this helps!  Thanks for an honest rating and for using FixYa.

May 19, 2009 | 2000 Jeep Grand Cherokee

1 Answer

Rear Brake Lights not working, 3rd light is working


check the fuse for the stoplights. Even though the 3rd one is working it should be on a different fuse. With both of them not working even after you changed the bulb it would seem to lead to a fuse.

Feb 09, 2009 | 1999 Jeep Grand Cherokee

1 Answer

1993 jeep grand cherokee limited no running lights/tail lights.


Id look at the headlight switch and do some voltage tests to see whats coming out of there. Pay close attention to any wires which look like someone was in there already.People can mess stuff up faster and better than the vehicle can by itself!

Jan 04, 2009 | 1993 Jeep Grand Cherokee

2 Answers

Lights


hmm interesting have you done any wiring to the lights at all?

Dec 13, 2008 | 2004 Jeep Grand Cherokee

Not finding what you are looking for?
2000 Jeep Grand Cherokee Logo

470 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...