Question about 1993 Oldsmobile Eighty Eight

1 Answer

My bearing went out in the front, how do I change that out?

How do you change out the Bearings on the front.

Posted by on

  • Anonymous Apr 15, 2009

    Yes its the wheel bearings.

  • Rick Reichlein May 11, 2010

    Do you mean the wheel bearings?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Oldsmobile Master
  • 6,982 Answers

You are dealing with a hub assembly there...Remove the brake assembly and rotor. Most hubs are held on by bolts from the outside as well as the large axle nut in the center. Sometimes after unbolting, you will find the hub is rusted in. It can be coaxed out using a chisel and lots of wd40. Get the new one before you start it will help you identify what you are removing.

Posted on Apr 15, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Replace bearings in front transaxle


If the bearings are worn there will be more to just replacing the bearings. The gear mesh pattern has changed so when you replace just the bearings there's a chance there will be an annoying noise coming from the final drive unit that won't go away. It may be necessary to replace the output gears .

Oct 14, 2014 | Cars & Trucks

2 Answers

Winding/grinding noise in the front end, not sure what it is?


get all 4 wheels off the ground,start vehicle,put in drive,with a large bar stop each wheel,itcan tell you which wheel has the issue.I've replaced all 4 hub and bearings,11/2 trs later the rear went again.... buy the best possible..hope that helps !

Aug 01, 2012 | 2006 Chevrolet Equinox LT

1 Answer

How do i replace the front wheel bearing on my peugeot 206


Need new front wheel bearings on Peugeot 206 02 plate how do you change the bearings

Feb 17, 2012 | Peugeot 206 Cars & Trucks

1 Answer

I am trying to replace the passenger side hub and bearing,before i tear it down i need to know if the bearing is just pressed onto the new hub and then the whole assembly slides onto the splined end of the...


Hello texasjagfan: My name is Roger and I will help you. The front hub bearings are press out bearings and you will need a press in order to change them. You will need to remove the front spindle to gain access to the bearings.You also will need an alignment when finished replacing the front bearings. The rear bearings are a hub and bearing unit.
Should you need further help please just ask. Please rate the answer. Thank You for using Fix Ya. Roger

Aug 18, 2011 | 2003 Chrysler PT Cruiser

2 Answers

Abs light on


if both the abs and traction control lights are on the problem is the bearings need to be replaced.happen to me and had to change both front bearings.problem solved.

Mar 19, 2010 | 2006 Chevrolet Uplander

2 Answers

I have owned two envoys now one 2001 one 2004 and both fuel pumps have went in them and front bearings just wondering why it keeps happening is there anyone else with these problems


there are many factors ur dealing with /fuel pumps are on and running constant like any other mechanical equipment over heats wears out craftsmanship i changed pumps on vehicles 10 yrs old with 120,000 ml than have same one back 2yrs later for a new one or 3yrs old veh out of warranty they just fail,as for bearings-- factors such as road conditions heavy loads 4x4 use high mileage non maintenance cause to wear faster and break down

Oct 19, 2009 | 2004 GMC Envoy

1 Answer

Whineing sound on R-hand side of my Malibu (wheel bearing i guess


it all depends on which type of bearings are fitted to the front hubs if there are 2 taper bearings fitted I:E one at either side of the hub then you can get away with knocking them out with a copper dollt. If it is one continuous bearing running through the hub then it is easer to press it out rather than trying to knock it out

Apr 23, 2009 | 2000 Chevrolet Malibu

2 Answers

Noisy front wheel bearing


It is possible but i do reccomend changing the bearing races in the hub when you do it to prevent any premature wear on your new bearings. A new hub/rotor assembly will come with new races installed if that makes it any easier.

    130890.gif
    tif.gif
moz-screenshot.jpgmoz-screenshot-1.jpg

Dec 12, 2008 | 1998 Chevrolet C1500

Not finding what you are looking for?
1993 Oldsmobile Eighty Eight Logo

Related Topics:

72 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8211 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...