Question about 1988 Toyota Corolla 4 Door

1 Answer

Snapped wheel studs on front wheels and need to change them

I snapped wheel studs on front wheels and need to change them.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 36 Answers

You have to hammer the studs through the spindle to get them out. then **** the new ones in with a nut and lots of washers. put grease on the washers and threads before you **** the studs in.

Posted on Apr 15, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Fitting whell spacers smart 450 2003


fitting wheel spacers to wheels is not a good idea . You will have to fit longer wheel studs and this weakens the stud as you cannot go up the stud diameter as is required to maintain the stud strength. The studs will snap under side load when cornering and that will leave you in a spot of bother. Next you will experience the same problem when off set rims were the thing to make the track wider . Looked smick but unfortunately the load was transferred from the larger inner bearing to the smaller outer bearing which was incapable of the extra load and so burnt off the stub axle . Chrysler and ford vehicles suffered most from this problem and is was mostly at speed . You will also have the problem that when you do this the tyre is closer to the mudguard edge and when you hit a bump or turn the edge of the mudguard will tear the tyre apart. . Consider why you want to do this and how much you want to come out as there are rims with the negative off set that will widen the track a lot safer with less problems.

Apr 15, 2014 | 2006 Smart ForTwo Cabriolet

1 Answer

Change a front wheel stud on a freelander


You need to take the entire wheel assembly off. The wheel stud will need to be pressed out of the hub and a new one pressed in.

Oct 14, 2012 | Cars & Trucks

3 Answers

Stud snapped off when taking the front left tire off. What is the part called with the threads on it?


that is called a wheel stud you can pick up one at your local advance auto and they also have the oem type lug nut to fit your truck also

Jan 18, 2010 | 1996 Chevrolet S-10 Pickup

1 Answer

How to change front brake rotor on 2000 ford taurus wagon cause front wheel shake when brake apply


Remove both caliper mounting bolts should be 12 or 13 mm bolts. Next remove both caliper mounting bracket bolts 15mm. Rotor should then pull off. If not use large hammer and hit the face off the rotor hub between the wheel studs until it comes loose. Make sure the face of the wheel hub is free of rust between the wheel studs and use high temp anti seize around the center circle of the wheel studs.

Dec 23, 2009 | 2000 Ford Taurus

1 Answer

Front wheel stud replacement for a 2006 Hyundai Sonata GL.


grind a flat spot on the round head of the new stud this should give enough clearance to install it. don't pull the hub this will damage the bearing.

Oct 24, 2009 | 2006 Hyundai Sonata

2 Answers

Rear wheel studs were bent one snap i recently


Try here: http://www.explorerforum.com/forums/showthread.php?t=182346

with photo's!

Sep 16, 2009 | 1997 Ford Explorer AWD

3 Answers

Broken stud on wheel


The studs press out and in. Perhaps a hammer would work. Replacements studs can be purchased. Need to remove hub, of course.

Aug 13, 2009 | Hyundai Motor 2003 Elantra

1 Answer

Broke stud on front left side


Yes you can replace the broken wheel stud. The wheel studs are pressed into place, and a vise will work to press it out, and in. You will have to remove the wheel hub, and then use a deep well socket and a bolt or something smaller than the actual stud to remove it with a vise. To replace it, you will need to use the deep well socket on the thread side of the stud, and press the new one in with the vise.

I hope this helps you, and I wish you luck with your repair.

Apr 25, 2009 | 2003 Pontiac Sunfire

1 Answer

Do I need to replace wheel studs or entire hub for front 1995 960


You Can Replace The Wheel Studs Call Napa And Find Out How Much They Are. Dont Go Dealer Cause They Are $20 A Piece And At Napa Like $4 Also You Can Try Autozone Or Kraigen But They Never Have The Ones I Need. Its Also Very Easy To Do Yourself If You Can Change The Brakes You Can Do This. You Can Have Them Pressed In At Any Tire Shop Usually $5.
Happy Fixing
Sincerely,
Michael Scott

Jan 12, 2009 | 1996 Volvo 960

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

509 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...