Question about 1995 Ford Taurus

1 Answer

Help with finding keyless door pad codes and resetting

I just bought a used 1995 Ford Taurus and it didn't have the car's manual with it. How can I find the codes for the keyless entry pad, and how to do a reset on it, if possible? Also, any help about the functions I can do with it and how to do them would be very helpful to me.

Posted by on

  • Anonymous May 22, 2009

    need to reset keyless door pad enter



1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Ford Master
  • 783 Answers

Open the trunk and up under the package tray where rear speakers mount,on the passenger side you will see the module.It will be black and have 3 connectors to it.It will have a sticker on it with a 5 digit code.It will also have a sticker on one of the trunk hindges with this code if someone has not removed it.Here is how the system works:

Keyless Entry Keypad To unlock the driver front door (20124), and disarm the anti-theft alarm control (19A366) (if equipped):

  • Enter the permanent factory code.
  • Enter the owner's alternate code.
To unlock the passenger door(s), press the 3/4 button within five seconds of unlocking the driver front door or luggage compartment door (40110) . To unlock the luggage compartment door, press the 5/6 button within five seconds of unlocking the driver or passenger door(s). To turn on the interior lamps (13776) and light all illuminated components, lift either front door handle (22404) and press any button on the keyless entry keypad (14A626) . To lock all doors, press the 7/8 and 9/0 buttons at the same time. (It is not necessary to enter the key code first.) This will turn off courtesy lamps. To program a temporary code:
  • Enter permanent code.
  • Within five seconds of pressing last button of permanent code, press 1/2 button.
  • Enter any alternate five-digit code within five seconds of pressing 1/2 button.

Posted on Apr 15, 2009


5 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 11 Answers

SOURCE: ford 2000 excursion keyless entry not working

look online or go to the dealer and find a reprogramming procedure.

Posted on Mar 12, 2010

  • 13 Answers

SOURCE: My keyless entry pad stopped

Try it with a new remote pad, turn the key back and forth untill the locks jump up and down.. do it slowly , when they jump make sure to leave the key in the on position while pressing both lock and unlock buttons on the remote, they should then jump again telling you that the remote is now programed.

Posted on Apr 14, 2011

  • 4369 Answers

SOURCE: factory keyless entry pad code where is it please.

You can take your registration and driver license to a dealer and they can use their diagnostic tool to retrieve it from the computer. It should cost 1/2 hour of labor. Call first & ask.

Also, look in glove box for a plastic "credit card" with the code on it.

Posted on Sep 22, 2009

  • 334 Answers

SOURCE: how do reprogram my keyless entry pad to a 1995

look in your owner manul it should tell you . or go to a dealer they will be abele to tell you

Posted on Nov 11, 2009

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Disable Keyless entry pad

The key is mechanical so disabling the pad would make no difference.

Nov 18, 2013 | Ford Taurus Cars & Trucks

1 Answer

Reprogram door locks

You can call or visit your local or 800 Ford Dealer on this one. It should be a free service to help locate the factory code usually located in the test your keyless pad...enter #s...8 then 9...this should lock all doors...After you get the factory code, your owners manual should be step by step to personalize a new code...Hope this helps.

Oct 03, 2013 | Mercury Mariner Cars & Trucks

1 Answer

What is the procedure for programming the key pad on the door to unlock the car?

  1. Locate the permanent factory remote keyless entry code in your car's owner's manual or by contacting the dealership.
  2. Enter the factory code on the keypad and press the "1/2" button on the keypad within five seconds to start the programming sequence.
  3. Enter a new five-digit code into the keypad within five seconds.
  4. Wait for the locks to cycle once to confirm the new code was successfully programmed.

Feb 24, 2011 | 1995 Ford Taurus

1 Answer

I bought a used 1993 Sho Taurus want to find the code to reset the keyless entry

the easiest way to go about resetting the keyless entry is to take it to a ford dealer or specialist to reset it is fairly cheap and to have a new one installed isnt bad either

Jan 14, 2011 | Ford Taurus Cars & Trucks

2 Answers

I bought a used 2008 ford escape. No owners manual. How do I reset the keyless entry. I don't know the original code.

did you mean the key pad on the door? if it is then you need to track down the original owner to give you the factory code then you can program up to 3 codes.
give the local dealer a call to see if they can run the VIN number for a factory code, they may charge you a fee.
if you bought it from a dealer then they must take care of that for you at no charge.
otherwise you will need to replace the key pad.

Mar 25, 2010 | 2008 Ford Escape

2 Answers

Resetting keylees entry code

factory keyless entry codes are the bold 5 digit number located on the keyless entry control module, the module is usually located on the drivers side above the parking brake handle

Mar 24, 2009 | 2005 Ford Taurus

1 Answer

Why did ford quit making to keypad on door?

You taurus is getting some age to it and after about 10 years the manufacturers stop making not maintenance parts. It's a cost cutting measure. Your best best is to head to the salvage or junk yards in your area and try to find one there. I don't know of any aftermarket companies that make these keypads. (I'm assuming your talking about the keyless entry pad on the outside of the drivers door.)

Dec 21, 2008 | 2008 Ford Expedition

2 Answers

Using numbered key pad on drivers door

the code can not be will need a scanner to retrive the keyless code.sorry.

Oct 26, 2008 | 1995 Ford Taurus

1 Answer

98 ford taurus door code

Your code may be on a sticker on the keyless entry module in the trunk below the package self on a tray the drops down.

Jul 14, 2008 | 1998 Ford Taurus

Not finding what you are looking for?
1995 Ford Taurus Logo

1,488 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

76691 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers


Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides