Question about 2002 Ford Windstar Cargo
2002 Ford Windstar
Go to this website and pick owner guide from left task bar.Input vehicle info then pick get owner guide.Then pick owner guide 2nd printing and your fuse info begins on page 200.
Posted on Apr 15, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
check fuse 37, a 20 amp yellow fuse in the interior fuse box, if that checks ok the problem is with the electronic module that controls the locks, it is called the GEM module.
Posted on Apr 14, 2009
Turn on interior lamps and watch lamps while working switch, if lamps dim and no noise is heard in door ( like crunching sound) you need to replace window motor, if noise is heard you have a failed window regulator.Lights do not dim you may have a bad switch. You can also try to hit in center of door panel to see if window will start working which also means bad motor. Hope this helps.
Posted on Jul 26, 2009
those two codes are for the o2 sensors. both are the upstream sensors on the front and rear banks. so they are desinagted bank 1 sensor 1 and bank 2 sensor 1. them most common cause for this is faulty o2sensors , bad gas and of a poor running engine. so if your car runs good (no misfire) and gas is ok then replace the o2sensor witch is the very most common cause.
Posted on Jan 28, 2010
Testimonial: " Help With Problem But Where Are These O2 Sensor"
Owners manual lists the fuses as :
Engine compartment fuse # 105, 40A
- This is the power to the blower motor relay to drive the blower.
Cab Fuse Panel, Fuse #22, 10A. This is the power to the switch in the HVAC panel.
- This fuse through the switch to operate the relay coil on the blower motor relay.
The other thing to check is the blower motor resistor, to see if there is any damage to it ( usually this is the blower only works on high )
This is behind the glove box
Posted on Nov 11, 2010
Tips for a great answer:
Sep 30, 2014 | 2002 Ford Windstar Cargo
Dec 31, 2011 | 2002 Ford Windstar Cargo
Oct 24, 2011 | 2000 Ford Windstar
Sep 05, 2010 | 2000 Ford Windstar
Sep 09, 2009 | 2002 Ford Windstar Cargo
Sep 07, 2009 | 1998 Ford Windstar
Aug 02, 2009 | 2002 Ford Windstar Cargo
Apr 24, 2009 | 2001 Ford Windstar
Jan 12, 2009 | 2002 Ford Windstar Cargo
135 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: