Question about 1995 Chevrolet Blazer

1 Answer

Replaced horn relay and horn still doesn't work

Replaced the horn relay but the horn still doesn't work

Posted by on

  • 4 more comments 
  • smlipton Apr 24, 2009

    do you know where the horn is? someone said we might have to take the engine out to find it?

  • smlipton Apr 28, 2009

    thanks! took horn out and it works, so I am guessing it's the wiring?

  • smlipton Apr 29, 2009

    anyone know how to disable air bag in steering to check?

  • carhob May 11, 2010

    did u check for power at relay? could be horn switch in steering or open wire in circiut,

  • carhob May 11, 2010

    in fender near batt.

  • carhob May 11, 2010

    did u check if horn was good and if power was at horn?

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 366 Answers

Pull airbag fuse! also known as sir fuse!

Posted on Apr 29, 2009

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
roniecon
  • 6826 Answers

SOURCE: 1987 camaro horn not working - clicking noise at relay

Make sure the horn is grounded at the base of the horn where it is mounted.Also run a gound from negative battery post to the frame and body.Also check the horn by running a positive wire from battery to the horn,while making sure of a ground.If I can help lrt me know.

Posted on Sep 14, 2009

emissionwiz
  • 76118 Answers

SOURCE: car horn won't work i changed the fuse and relay

In most cases this problem is caused by the rotating ribbon circuit contact under the steering wheel having a broken filament, the part is known as a clock spring contact, u will need to properly disarm the airbag and remove the steering wheel to access the part. WARNING: Failure to disarm the airbag system can result in an unexpected Airbag deployment and possible serious personnel injury disconnect the battery 30 minutes prior to start of work.

Posted on Apr 29, 2010

  • 14036 Answers

SOURCE: I have a dodge caravan

REMOVE HOTWIRE HORN OR PRESS REMOTE BUTTON LOCK CAR DOORS IF YOU HEAR CAR HORN BLOWS WHEN ACTIVATE CAR ALARM. HORN WORKING.MORE LIKELY THE AIRBAG AND HORN PAD NEED REPLACING.IF YOU GOING TO FIX. DISABLE AIRBAG IN THE STEERING WHEEL BEFORE REPLACING THE AIRBAG AND HORN PAD. TURN OFF RADIO.THEN DISCONNECT NEGATIVE BATTERY CABLE FOR 20 MINUTES BEFORE REMOVING AIRBAG IN STEERING WHEEL.THAT HORN PAD WITH AIRBAG IS NOT GOING TO BE CHEAP.

Posted on Jun 12, 2011

duane_wong
  • 6826 Answers

SOURCE: 1988 ford broncho horn doesn't work ,relay

OK, try to use a test light and connect the horn lead to ground to see if there is current, and to see if it sounds. If it does, then the wiring is fine to the horn itself. The relay may click, but are the contacts ok? Maybe swap out the relay for a new one.

Posted on Nov 04, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The horn on my 2010 Santa Fe stopped working. Any suggestions or help


when pushing on the horn pad you may hear a click noise this tells you the circuit is good from the horn pad to the horn relay and out to the horn. find the horn and check for power at the horn terminal when the horn pad is pushed. if it lights up then replace the horn. if it doesn`t then you will have to check for a wire problem from the horn back to the relay. but horns are usually the problem.

Sep 17, 2014 | 2010 Hyundai Santa Fe

1 Answer

Horn does not work


Did you unplug the horn first & put 12v to it

You have horn that doesn't work,get it working,
then you can work on what turns it on

I have never seen a horn relay fail in 50 years

Nov 19, 2012 | 1996 Ford Ranger SuperCab

1 Answer

Replaced horn fuse still not working in 2004 pacifica


does it work with the key fob but not with the switch then check the horn pad switch if doesn't work with either check the relay

Oct 07, 2012 | 2004 Chrysler Pacifica

1 Answer

Horn doesn't work


remove grill ck horns with jumper wires ck plug for power, if horns work .if horns dont work with jumpers replace . if no power ck fuse if good relay for signal and power if no signal when horn pushed either horn switch in airbag ,or cable reel witch need cked with special srs tools .

Aug 04, 2012 | 2005 Chevrolet Silverado 1500 2WD

3 Answers

My 2001chrysler town and country van horn does not work


Check the horn relay to see if it works. Most cars use the same relays for multiple other functions. Check the part number on the horn relay and find another relay that is working that has the same part number. Swap out the horn relay with the known good relay. If that doesn't work, check all the wiring in association with the horn. If all the wiring is sound, then it is probably the horn itself, but that is very rarely the case.

Aug 02, 2012 | 2001 Chrysler Town & Country

1 Answer

Horn doesn't work


You may have a bad horn relay. You can try to go to Autozone.com and register your car for FREE. Once you do that, you will be able to download a chassis wiring diagram and a powerbox layout. Then search for the horn relay and once you have identified it, replace it

Most of the bigger autoparts stores should have one in stock.

May 07, 2012 | Chrysler Cirrus Cars & Trucks

1 Answer

1988 ford broncho horn doesn't work ,relay clicks when horn button is pushed,I replaced the horn it still doesn't work. what should I check next.


OK, try to use a test light and connect the horn lead to ground to see if there is current, and to see if it sounds. If it does, then the wiring is fine to the horn itself. The relay may click, but are the contacts ok? Maybe swap out the relay for a new one.

Nov 04, 2011 | Cars & Trucks

1 Answer

When running air condition, if i blow the horn both stop working, until i replace the horn fuse


try unplugging the horns to see if they are the problem. If the fuse still blows, the problem is the wires from the relay to the horns. If the fuse doesn't blow, plug in one horn at a time to see which one is bad.

Jul 27, 2011 | Dodge Ram 1500 Cars & Trucks

3 Answers

I have a dodge caravan 2000, and the horn doesn't work. I changed the relay fuse and fuses. It still doesn't work. Please help.


REMOVE HOTWIRE HORN OR PRESS REMOTE BUTTON LOCK CAR DOORS IF YOU HEAR CAR HORN BLOWS WHEN ACTIVATE CAR ALARM. HORN WORKING.MORE LIKELY THE AIRBAG AND HORN PAD NEED REPLACING.IF YOU GOING TO FIX. DISABLE AIRBAG IN THE STEERING WHEEL BEFORE REPLACING THE AIRBAG AND HORN PAD. TURN OFF RADIO.THEN DISCONNECT NEGATIVE BATTERY CABLE FOR 20 MINUTES BEFORE REMOVING AIRBAG IN STEERING WHEEL.THAT HORN PAD WITH AIRBAG IS NOT GOING TO BE CHEAP.

Jun 12, 2011 | Dodge Caravan Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

236 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8270 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...