Question about 2004 Chrysler Sebring

1 Answer

2004 Chrysler Sebring- Left turn signal problems

I have a 2004 Chrysler Sebring LTD Coupe. When I turn the headlights on the Left rear signal lamp stays on, when lights are off and I use the left turn signal, the hazards work and all the lights on the inside blink.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

Sounds like a short in the wiring or fuse panel. As new as it is, I would suggest a mechanic as troubleshooting wiring in newer cars is not only difficult, but also dangerous. Many a shade-tree mechanic has set off the airbags that way!

Posted on Apr 14, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Windshield wipers stop working when the defroster is on


The only thing they have in common is the ignition switch.

Dec 18, 2015 | 2007 Chrysler Sebring Sedan

1 Answer

Can the 2005 Chrysler Crossfire Limited Coupe automatically turn on the low beam head lamps at night?


No. It has auto lamps.all newer vehicles have them. Some you can turn off. You have to have the light switch in the dash. If it is in the turn signal switch/ column. Your out of luck.

Dec 04, 2014 | 2005 Chrysler Crossfire

1 Answer

Left rear turn signal light replacment


Hello,

To replace the left rear turn signal light, please follow the steps below:
  1. Open the rear hatch of your van.
  2. There are two black button like protrusions behind the hatch next to the turn signal lamp.
  3. Pry these out and remove lens.
  4. Replace bulb.
  5. Then reverse the process th reassemble the hatch back together.
Hope this helped. Thank You for using FixYa!!!

Jan 12, 2011 | 2004 Chrysler Pacifica

2 Answers

Tire specs for 2001 chrysler sebring


HI. Here is the complete line up of specs concerning your vehicles front and rear tires. You did not post the trim line of this car, so I posted all models and tire combination's specified by the manufacture.


2001 Chrysler Sebring Lim 2 Door Convertible Front and Rear Tires P205/60R16
2001 Chrysler Sebring LX 2 Door Convertible Front and Rear Tires P205/65R15
2001 Chrysler Sebring LX 2 Door Convertible Front and Rear Tires P205/60R16
2001 Chrysler Sebring LX 2 Door Coupe Front and Rear Tires P205/55R16
2001 Chrysler Sebring LX 4 Door Sedan Front and Rear Tires P205/65R15
2001 Chrysler Sebring LX 4 Door Sedan Front and Rear Tires P205/60R16
2001 Chrysler Sebring LXi 2 Door Convertible Front and Rear Tires P205/60R16
2001 Chrysler Sebring LXi 2 Door Coupe Front and Rear Tires P215/50R17
2001 Chrysler Sebring LXi 4 Door Sedan Front and Rear Tires P205/60R16

Jul 06, 2010 | 2001 Chrysler Sebring

2 Answers

I can't locate the fuel filter on my 2004 chrysler sebring 6 cyl coupe (3000).


I would check if it is in the gas tank on that model. you can go to your local parts store and they should be able to inform you of this.

Jun 29, 2009 | 2004 Chrysler Sebring

1 Answer

How do I replace the headlight assembly on a 2006 sebring?


  1. Remove the front bumper cover
  2. Remove the upper headlight housing mounting bolt and pushpin
  3. Remove the lower headlight housing mounting bolts
  4. Pull out the headlight housing assembly and disconnect the electrical connector.
Its pretty easy. Just raise the hood, see the two silver 8mm cap screws on top of the cross member that supports the radiator and fan assembly. Two screws on each side above the headlight housings. The outer screw is right next to the corner of the fender when the hood is raised. Remove the two screws, then the headlight assembly is loose. Just gently pull the headlight assembly forward enought to see the three lamp socket holders on the back side of the headlight assembly. From the outside corner to the inside are first, the parking turn signal, then the low beam lamp and finally the last, the high beam lamp. To remove the lamp socket, push the small plastic locking tab and turn the socket assemby counter clockwise about a half turn and remove the lamp. Now you can replace the lamp and install it back the same way you took it out. Don't touch the new lamp glass with your bare fingers. Oil from you skin will absorb into the glass causing the glass to turn dark and shorten the lamp life. 

May 04, 2009 | 2006 Chrysler Sebring

1 Answer

Turn signals, rear deforst, and wipers stopped working


this sounds like your body control module is bad.

Jan 19, 2009 | 2004 Chrysler Sebring

2 Answers

Driving lights on chrysler sebring convertible


The roatating knob that turns on the headlight pulls out to turn on the fog lights, but only pulls out when the headlights are on,

Aug 15, 2008 | 2004 Chrysler Sebring

Not finding what you are looking for?
2004 Chrysler Sebring Logo

374 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8589 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...