Question about 1992 Chevrolet S-10
I have replaced the fuel filter, the fuel pump, and fuel is getting to the injectors but my truck will still not start, i have spark
If you have fuel pressure and spark, then the truck should start. I would double check ignition. There is a coil, and most importantly an ICM (ignition control module). Its in the distributor. Remove the cap and rotor and you will see it. Its 2 inches long and 1 wide.There are 2 screws securing it, and 3 connectors attached to it. Remove the modual and have it tested a your local auto parts store. Check the fuses. Also turn the key to the on position and listed for the fuel pump. Crank the engine and check and look at the injectors to verify fuel entering the intake. good luck.
Posted on Oct 01, 2013
Does the exhaust sound restricted? if u are not sure most muffler shop will test for a restricted Cat for free.
Posted on Apr 15, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Nov 19, 2016 | Chevrolet S 10 Cars & Trucks
Oct 12, 2015 | 1988 Chevrolet S-10
Sep 06, 2013 | Cars & Trucks
May 25, 2011 | 1992 Chevrolet S-10
Nov 18, 2010 | 1989 Chevrolet S-10 Blazer
Apr 01, 2010 | 1993 Chevrolet S-10
Oct 28, 2009 | 2000 Chevrolet S-10
Sep 15, 2009 | 1992 Chevrolet S-10
563 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: