Question about 1993 Ford Ranger SuperCab

1 Answer

1993 ranger 4x4 need to replace rotors. Is this something I can do with basic tools? Is it easier just to have them done??

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 232 Answers

Basic tools will get them off,you will be removong alot of parts,make sure to lay everything out in the order you remove so you can reassemle the in the correct order.You will get to the point where you have to remove the large that holds the rotor to the end of the drive shaft,there is a small key on the inside edge of the nut that has to come out before you can start turning it.Hope this helps.

Posted on Apr 14, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Removing front rotors on 93 ranger 4x4


2wd or 4wd? The 4wd requires a special socket you should be able to borrow from the parts store.

May 16, 2010 | 1993 Ford Ranger SuperCab

1 Answer

How does the spring go in on replacing back brakes on 1993 ford r


They make a brake spring installation tool. You can use vise grips, or hook the spring on a screwdriver and get the edge of the screwdriver abve the pin, and pry up, might take a couple tries.

May 02, 2010 | 1993 Ford Ranger SuperCab

1 Answer

1993 F150 4x4 w/ auto locking hubs - rotor removal


There are some special 4 tooth and hex sockets for removing the nuts inside the hubs of the truck.
YOu can find these at NAPA or maybe AutoZone or Advance. I would go to NAPA because they more than likely have it and also know something about repairing this assembly.
Ford uses Dana front end parts and NAPA has original Dana parts in stock... so it is as good as or better than original and they would have the tool for it.
Be careful and follow the procedure exactly for putting the front hubs back together.
YOU CAN RUIN THE FRONT END OF THE TRUCK IF YOU DO NOT PERFORM THIS SERVICE CORRECTLY.
And trust me... many of the idiots working in repair garages do not know how to do these older 4x4 hubs either... ask someone and read the books for the right procedure... some of the older mechanics may show you how to do it. Ask

Mar 04, 2010 | 1993 Ford F150 SuperCab

1 Answer

How do i remove the front brake rotor from a 1993 ranger 4x4?


jack up the truck and block up
pull tires and pull the 2 bolts out
pry off cablper and depresse the calbper put new brakes in make sure you take old ones out first put cabpler backon and bolts

Jan 26, 2010 | 1993 Ford Ranger SuperCab

1 Answer

1989 Ford Ranger 2.9 liter 4x4 Runs Horrible


change fuel filter. add can of SEAFOAM(parts house) to fuel. It sounds like the beginning of EGS(ethanol gas syndrome). corn liquor substance, water, and clogging. all caused by ethanol fuel.

Sep 02, 2009 | 1989 Ford Ranger

2 Answers

How do you remove front brake rotor on k 3500 4x4 1993


pull tire, remove outer hub (automatic or locking?) usually eight hex screws, behind hub assembly is a "wheel bearing nut" about 2" in diameter, this is just a circle with threads on the inside of it and four notches around the outside of it, the only way to get this out is to get the right "wheel bearing nut socket" from an automotive store, just FYI, it is probably going to be a special order tool. after "wheel bearing nut" is off the rotor will come off along with the wheel bearings, while you are in there these should probably be replaced also

Aug 14, 2009 | 1989 GMC K3500

2 Answers

1993 f250 7.3 diesel - hard pedal, hard to stop,


Check front calipers, caliper should "float" to be self centering. If the caliper is stuck only the inside pad is pushing on the rotor instead of the caliper pinching the rotor. You will need to remove the caliper from the assembly, there are usually rubber boots to keep out the dirt and water from the slide pins, they are ofter cracked/broken or missing altogether. You may need a small torch and some rustbuster to get things moving again.

May 19, 2009 | 1993 Ford F250

1 Answer

Heater is blowing luke warm heat


Double checking, does fun shut off when switched to heat instead of defrost?

Jan 24, 2009 | 1993 Ford Ranger SuperCab

Not finding what you are looking for?
1993 Ford Ranger SuperCab Logo

Related Topics:

166 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5470 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...