Question about 2001 Mazda Millenia

1 Answer

Down shift. flashing hold light

The engine light comes on while driving.. the car drops gears and maintains speed just at a high RPM's and the hold light begins to flash.. i went to autozone and the dianostic came back with 2 codes.. EGR system malfunction and turbine speed sensor circuit malfunction. which is more likely to cause my car to down shift in the middle of me driving it?

Posted by on

  • Anonymous Mar 21, 2014

    Transmission at high way speeds shifts from 3rd gear to od and back and forth. Check engine light only comes on when this happens

  • Anonymous Mar 21, 2014

    Driving thought I heard a snap gear shift won't move peddle goes down

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Mazda Master
  • 75,822 Answers

THE TURBINE SPEED (PART OF THE TRANSMISSION CONTROLS) SENSOR IS THE CULPRIT HERE, REPLACE IT.

Posted on Apr 14, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why does the voltage drop to battry volts when i put the gear lever in drive?


the voltage should remain at 14.5 volts at all engine speeds above idle 13.9 volts at idle indicates that the alternator is charging but not at set voltage
head lights are the biggest drain that affects charge rate rate and it it maintains and from you description that is not a problem
when you select a gear it indicates a heavy drain which is a high resistance or a dead short in that circuit that is taking out more power than the alternator is charging
There there is nothing in the gear selection that draws such power
the other thing is that when selection a gear the engine rpm is tool low and the alternator stops charging
for auto vehicles , the idle rpm should be at 800-900 rpm dropping to 750-800 in drive

Jul 08, 2017 | Ford Cars & Trucks

1 Answer

Speedometer, odometer and cruise control not working in '97 Taurus Duratec


computer probly needs to be flashed or reprogrammd to sync w new motor---some independent shops have the factory gear to do this-dealers only go back like 5yrs

Nov 17, 2013 | 1997 Ford Taurus

1 Answer

2005 chrysler sebring loses power driving up hill & RPM is up high, Ive changed, spark plugs & air filter. dont know what to do.


Not sure I am following your story.
Are you saying the transmission is slipping and therefore the RPM is high even tho the road speed is not ?
Or is the transmission not upshifting to the next gear at a normal road speed ?
Is the check engine light on ?

Feb 10, 2013 | 2005 Chrysler Sebring Sedan

1 Answer

2000 mercury cougar engine speed stays up when gas pedal is release, increase when pedal is release and shifting gears, takes 3 seconds or more to come down to idle when gas pedal is release, will hold at...


You have a mechanical bind. Disconnect the main linkage and work it all by hand. Everything should be free and slopy. Aerosol carb cleaner will help, but only when the engine is not running.

May 30, 2017 | Mercury Cougar Cars & Trucks

2 Answers

When does the overdirve need to be turned on


Usually the overdrive should just be left on. It should only come into play when you are at high speeds above 50mph. This is essentially your "5th Gear" and should increase fuel economy. If you leave the overdrive "OFF" on the highway your engine RPM will be higher causing the fuel economy to suffer.

Nov 24, 2012 | 1991 Nissan Stanza

1 Answer

Corolla Having trouble shifting


This could be a kick-down servo adjustment.

Refer to the service manual.

Frank
Frank's Friendly Cars Maui Car Rental

www.MauiCarRental.biz

May 17, 2009 | 1996 Toyota Corolla

1 Answer

1999 jeep grand cherokee will not shift into over drive.


change the Speed sensor on the transmition.  On my 99 it would not shift out of first gera when my gas light would turn on. Every time it happened untill i filled it up . I changer the speed sensor  and all is fine

Apr 05, 2009 | 1999 Jeep Grand Cherokee

2 Answers

Stick shift # Automatic RPM


That is normal,If you do the same speed in 4th gear the rpm's will almost double.

The rpm's will repond faster in a manual than an automatic.

In a manual the engine supplies the power required directly to the gear that you have selected thus the engine rpm's will increase or decrease as needed.

Jan 07, 2009 | 2002 Nissan Altima

2 Answers

Mazda 626 'HOLD' light after gear box oil seal was replaced


I have the same problem with my car I think its the torque converter clutch but you should visit a diagonestic machine just to find out

Dec 06, 2008 | 1998 Mazda 626

Not finding what you are looking for?
2001 Mazda Millenia Logo

530 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8211 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...