Question about 2000 Chrysler Cirrus
Drives fine for a while after running, will idle very rough at higher speeds and stall at stop sign light comes on and then after a while drives fine gos back and forth replaced gas cap, plugs, fuel filter and air filter cleaned throttle body, cant aford to have hooked up to get code what do i do its getting wors
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
May 17, 2017 | Cars & Trucks
Sep 26, 2015 | 1995 Chrysler Cirrus
Mar 17, 2017 | 2000 Ford Focus
Engine stalling and rough run
issue at low speeds
This problem is commonly caused by a dirty automatic idle speed control valve and throttle valve. Buy a can of throttle valve cleaner (do not use carburetor spray cleaner!) from NAPA or Carquest (made by CRC chemicals) and spray it into the air intake while the engine is running, use up about 1/2 the can, engine will try to stall hold the speed up, shut it down and let it soak for 30 minutes, restart and blow out the remaining fluid, shut it down and disconnect the negative battery cable for 5 Min's to reset the base idle control
Aug 06, 2012 | 2000 Mazda 626
Apr 26, 2011 | 2006 Ford Focus
Jan 15, 2010 | 2000 Chrysler Cirrus
Jun 19, 2009 | 2000 Chrysler Cirrus
Mar 12, 2009 | 2000 Hyundai Sonata
351 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: