Question about 1996 Dodge Dakota

1 Answer

1)Engine over heats/2)Powere steering comes and goes

1)After driving in the summber with a 97 dogde dakota v6 the engine over heats. What do i do to fix it.

2) What do i do to fix the pwoer steering. It comes and goes alot. What needs to be replaced and bought?


Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

Check your oil to see if it is gray milky looking color if so you have a bad head gasket,a new radiator cap

Posted on Jun 04, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1991 olds location fuse for memory power/no back up power radio & ac control


now its not a 1988 but a 1091 olds, and not a Dakota.
im totally gobsmacked. what is it, below is Dakota answer
if it is an Olds what model car , what engine?

ok , the posts come out of order, i answered your first post
with a question, and he it is the memory fuse.
what engine?
2.2 L (134 cu in) K I4
2.5 L (150 cu in) K I4
2.5 L (150 cu in) AMC I4
3.9 L (238 cu in) LA/Magnum V6
5.2 L (318 cu in) LA/Magnum V8

the 2.5 ECU memory pin as pin A41 red wire
and goes to the battery via the main FUSE LINK.
i looked at the schematic for the other engine, same link.......
id bet dollars to donuts its not bad.
there are 3 links, one for Altenator, (is it dead) one for A/C and heater blower, is it dead, and one to drive the input to the ignition swich
the ignition goes dead, if that red wire is dead.
so is A41, not at 12v at all times.

my guess, is you posted to Dodge forum ,why do that?
post to OLDS. with engine size and correct year and model OLDS>
there are 10 Oldsmobile models, name just 1.
like Delta 88?

Jun 07, 2014 | 1988 Dodge Dakota

1 Answer

My 97 dogde caravan battery drains while im driving and my alternator is good.so what else can be the problem?


i dont see one but the alternator, try this, run engine and remove one of the battery cable if the engine stays running you have a good alternator if engine stops you have a bad alternator.

Dec 11, 2013 | 1997 Dodge Caravan

1 Answer

My 2010 dogde charger 3.5l v6 has code p0153 and po133 and u0126 with the check engine light on what could that be.


code p0153 refers to heated oxygen sensor-1 bank 2 slow response/no activity detected===causes ---heating inoperative---wiring---oxygen sensor.
code po133 refers to the same problem as 153 and states the oxygen sensor several times so I would be replacing that unit.

Jul 04, 2013 | Cars & Trucks

2 Answers

How to replace drive belts on 97 honda accord V6. When I put back in the third new serpentine belt on the pulley of the power steering pulley,the belt can not get to the groove, It is blocked by the ...


The power steering pump should have a couple of retainer bolts, and then one adjuster bolt. Loosen the two retainer bolts slightly, then adjust the pulley back out of the way, slip the belt on, and use the power steering pump to tension the system.

Jun 10, 2011 | 1997 Honda Accord

2 Answers

Need digram of fireing order of v6 dodge truck


For the 1987 Dodge Dakota 3.9L:

Firing Order:
1 - 6 - 5 - 4 - 3 - 2

Cylinders:
........(back).......
|..6..|........|..5..|
|..4..|........|..3..|
|..2..|........|..1..|
........(front)

Distibutor:
....6.....5
1.............4
....2.....3

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me on FixYa.com!


Jul 07, 2010 | 1987 Dodge Dakota

1 Answer

Vacume hose for Heating/AC connect to on a 98 Dodge Dakota


should start on the pass side of the intake and go to a fitting on the firewall which goes under the cowling and through the cab.

Jun 10, 2009 | 1998 Dodge Dakota

1 Answer

98 corvette 5.7 eng., harmonic balancer needs replacing!


Crankshaft Balancer: Service and Repair
REMOVAL PROCEDURE
1. Disconnect the negative battery cable.
2. Release the accessory drive belt tensioner (3).
3. Remove the drive belt (5) from the engine.
4. Remove the power steering gear from the vehicle.
5. Remove the starter motor.
6. Remove the power steering cooler bolts from the front crossmember.
7. Remove the power steering cooler from the front crossmember and reposition.
8. Release the air conditioning (A/C) belt tensioner (10).
9. Remove the A/C drive belt (1) from the engine.
10. Remove the crankshaft balancer.
INSTALLATION PROCEDURE
1. Install the crankshaft balancer.
2. Install the A/C drive belt (1) to the engine.
3. Install the power steering gear.
4. Install the power steering cooler to the front crossmember.
5. Install the power steering cooler bolts.
^ Tighten the power steering bolts to 11 Nm (97 inch lbs.)
6. Install the starter motor.
7. Lower the vehicle.
8. Install the accessory drive belt (5) to the engine.
9. Connect the negative battery cable.
^ Tighten the negative battery cable bolt to 15 Nm (11 ft. lbs.).
10. Program the Transmitters.

May 11, 2009 | 1997 Chevrolet Corvette

2 Answers

I need to know where the thermostat is in a 2004 dodge dakota 3.7 L V6


follow the upper radiator hose to the engine, drain about 1/2 gallon of coolant and then pull upper hose off at the engine, look inside the metal large nipple, that is the thermostat.

Apr 01, 2009 | 2004 Dodge Dakota

1 Answer

Need to remove the heater core from a 1998 Dodge Dakota, 3.9 engine, 2-wheel drive.


lol...I hope you are ready for this....You need to remove the entire steering column...then the entire dashboard and everything has to come out...there a few bolts in the engine compartment and the rest are in the dash...it is a project not alot of people enjoy doing....

Jan 23, 2009 | 1998 Dodge Dakota

3 Answers

Location of Crank Sensor


Front of the engine near the the timing chain cover, this is a picture. Make sure the connector is clean and free of corrosion.



300? 300: true ); MAX-HEIGHT: 400px; ; HEIGHT: expression(this.height > 400? 400: true )" src="http://info.rockauto.com/getimage/getimage.php?imagekey=1005895&imageurl=http%3A//www.standardbrand.com/web_app/catalog/images/PC127.jpg" />

Aug 04, 2008 | 1997 Dodge Dakota

Not finding what you are looking for?
1996 Dodge Dakota Logo

Related Topics:

99 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8202 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...