Question about 1994 Toyota Camry

1 Answer

Wheel turns but car doesn't - 1994 Toyota Camry

Posted by Anonymous on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Toyota Master
  • 3,961 Answers

Ooh, something in your steering has come adrift. There was a recall on this Camry model (widebody) for a potentially loose steering wheel nut, so I would start there.

http://www.turboninjas.com/camry/sr.pdf

If that is nice and tight, you will have to investigate the steering shaft lower universal joint clamp, staeering rack mounting bolts and clamps (all potential culprits), and then the steering inner and outer ball joints.

Posted on Sep 10, 2013

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I take out the slack of right and left of my steering wheel on a 1991 chevy truck?


Google states: Hold the ateering shaft at the steering box with a wrench or channel locks, have someone get in and turn the wheel. If the wheel turns and the shaft doesn't, then your problem (or at least part of it) is in the shaft between the wheel and the box. If the wheel does not turn then hold the steering box output shaft and do the same thing. If the wheel turns and the arm does not then you have play in the box. This should be adjustable. If there is no play in the box then check the tie rods and ball joints.




Td

Oct 01, 2012 | 1991 Chevrolet C1500

1 Answer

Pontiac g5 2007 steering wheel doesn't return when turning


This car has electric steering, you must have the system checked by the dealer.

May 18, 2012 | Pontiac G5 Cars & Trucks

1 Answer

My key doesn't turn in the ignition, its automatic and the shifter and wheel wont move either. Everything is locked how do I unlock it? help pls?


If turning the steering wheel to the left or right doesn't allow the key to turn, it sounds like your tumblers in the lock cylinder have failed. Unfortunately, there is no way to know when this is going to happen, but eventually, it happens. Not a real expensive fix. Replace the ignition/lock cylinder.

Apr 25, 2012 | 1992 Pontiac Sunbird

2 Answers

My left turn signal turns wipes on and front signal doesn't work. Whats problem


This is going to sound like a stupid question, but are you using the turn signal properly? The turn signals are on the left of the steering wheel and wiper controls are on the right side of the steering wheel on you car.

Jan 25, 2012 | 2002 Suzuki XL-7

1 Answer

My 1999 Isuzu Rodeo 4x4 four wheel disk rear wheels will not come off even without the lug nuts, why?


Because the wheels are corroded to the hub, causing it to seize. Leave one nut threaded on just a few turns (so your wheel doesn't go flying), get a big hammer and hit the inside of the tire with a good solid shot. That wheel will break loose pretty quick. Good luck!

Nov 06, 2011 | 1999 Isuzu Rodeo

1 Answer

Key won't turn in ignition


On many vehicles, the key locks the steering wheel. If the wheel is turned, it can keep the key from turning. While trying to turn the key, push the steering wheel hard to the right and if that doesn't work, push the steering wheel hard to the left.

Gary

Sep 30, 2011 | Cars & Trucks

1 Answer

After installing a new altenator on a bravado it will not let the key turn or the wheel turn


It sounds like you have the car parked close to a curb. Pull down clockwise on the steering wheel hard in one direction and try to turn the key. Try the other way if that doesn't work.

Jun 16, 2011 | Oldsmobile Bravada Cars & Trucks

1 Answer

Steering wheel will only turn slightly in either direction, can't turn the key either way it is a 2000 Chrysler Voyager


most cars have a steering lock that engages when you turn off the car. If you try wiggling the wheel while you turn the key, that might free up your steering. If just wiggling it a little does not work, try pulling it one way and turning the key, giving it a little force turning the wheel (sometimes the wheel locking mechanism gets stuck) ... if it still doesn't work, try turning the wheel the other way and turning the key. If you are still locked up .. you'll probably need to see a mechanic about it. Hopefully the wheel lock is just a little stuck and you can free it up yourself -- it's free that way :-)

May 29, 2011 | 2001 Chrysler Voyager

1 Answer

Click felt on steering wheel .!


check power steering motor and wires that may be damaged going to it also check your tie rods to see if they are loose or stripped

Mar 12, 2009 | 2003 Chevrolet Monte Carlo

Not finding what you are looking for?
1994 Toyota Camry Logo

73 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

Marvin
Marvin

Level 3 Expert

84966 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...