Question about 1995 Jeep Grand Cherokee

1 Answer

Location/testing of crank sensor 1995 jeep wrangler

Location/testing of crank sensor on 1995 jeep wrangler

Posted by on

  • 2 more comments 
  • Anonymous Mar 14, 2014

    camshaft sensor bank one error on jeep wrangler JK 2008 model

  • Anonymous Mar 24, 2014

    will not crank

  • Anonymous Mar 30, 2014

    where is the knock sensor on a wrangler 4.0

  • Anonymous Mar 31, 2014

    my jeep wont start when its cold and starting fluid dose not help, it cranks and cranks but nothing. As soon as u put jumper cables on it, it starts first crank.

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Jeep Master
  • 6,982 Answers

Should be on the bellhousing on the drivers side just where you need rubber arms to reach it.Should have no continuity between b&c terminals (check with ohmeter) Harness plug is usually on the drivers side between the master cyl and the back of the engine (unless someone moved it)

Posted on Apr 14, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Show me a picture of the ignition control on a 2003 grand cherokee please


close your eyes. picture a pcm. now picture a ckp(crank sensor) at the bellhousing. now picture a u-tube video about howto test a crank sensor, jeep grand cherokee. now picture a "fluke" test meter or equivalent. or picture a towtruck taking it to the jeep dealer to get your pcm out of sleep mode by a drbIII scantool and run the tests to diagnose

Apr 27, 2014 | 1995 Jeep Wrangler

1 Answer

The speedometer has stopped working on my 1995 Jeep Wrangler. I have been told to replace the speed sensor. Is this a solution and if so, where is this sensor located?


Do not know all the specifics like what engine ect... Most speed sensors are located by transmission valve body area.

Apr 06, 2012 | 1995 Jeep Wrangler

2 Answers

1995 jeep wrangler when cranking sometimes check eng. lite doesnt come on when this happens i have no spark.cranks good but no spark. when the check eng lite does come on when cranking then the jeep would...


Your ecu is in need of repair. Your jeep has what is known as the "delayed check engine light problem". Time has taken it's toll on some of your ecu's internal components, the ones that supply power the fuel and ignition circuit relays. The ecu is slow to supply power to the circuits in the morning, causing the delay. Your jeep may also have a bad crank sensor, which would cause the sudden shutdown while driving. Your ecu can be repaired or replaced, your choice. Both options are available on ebay.

Sep 30, 2011 | 1995 Jeep Wrangler

1 Answer

Jeep wrangelr Crank Position Sensor


wall5552: there were two engines used in 1992 Jeep Wranglers.
A 2.5 liter and a 4.0 liter. HOWEVER>>>> The location for the crank angle sensor is the same for both.
It is located on the bell housing up near the front at about the 10:00 PM position.
The Cam position sensor is located in the Distributor on both engines as well.

May 10, 2009 | 1992 Jeep Wrangler

1 Answer

Have 1995 jeep wrangler-2.5 engine, won't start, have power to coil pack but not past coil pack, replaced coil pack with new one,electrical problem or possible sensor just not sure what to look for,anyone...


Most common cause is the crank sensor...It tells the computer when to fire off coil. Cam sensor does this as well but is less prone to failure. Don't change parts because I said so! Proper testing is essential! Test b&c terminals of sensor with an ohmeter. There should be no continuity there (same as when the ohmeter probes are not connected to anything) Terminals should be marked on harness connector.

Apr 15, 2009 | 1995 Jeep Wrangler

1 Answer

1995 Jeep YJ Wrangler


Check the coolant sensor, cam and crank sensor and make sure they are all plugged in.

Apr 10, 2009 | 1995 Jeep Wrangler

2 Answers

Luging down


have the coil tested

Aug 08, 2008 | 1995 Jeep Wrangler

1 Answer

1995 jeep wrangler


if no check engine light is on, check the egr valve, sounds to me that it is stuck open or the egr silinoid is bad

Jun 21, 2008 | 1995 Jeep Wrangler

Not finding what you are looking for?
1995 Jeep Grand Cherokee Logo

Related Topics:

723 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...