Question about 1996 Honda Civic

1 Answer

Replace panel assy on 96 Honda civic

I need direction to remove and replace the center panel assembly called the instrument garnish on a 96 Honda civic

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

  • Expert
  • 153 Answers

Remove the lower knee bolister then there are 2 screws at the bottom of the garnish that was hidden by the knee bolister then remover the other 2 screws that are on the uper half of the garnish they r kinda hidden tho s look hard just look at the guages then look up is the best way i can describe where they are

Posted on Sep 27, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i and do i have to replace the whole shift cable on my 2002 toyota higfhlander,6 cyl 4 wheel drive?I have the end totally out(front end that hooks to trans lever,Can I remove the end only?Metal...


1. REPLACEMENT

  1. REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSY CENTER
  2. REMOVE FLOOR CARPET COVER CENTER RH
  3. REMOVE FLOOR CARPET COVER CENTER LH
  4. REMOVE INSTRUMENT PANEL FINISH PANEL LOWER CENTER
  5. REMOVE BATTERY
  6. REMOVE AIR CLEANER ASSY
  7. REMOVE AIR CLEANER HOSE NO. 1
  8. REMOVE FLOOR SHIFT TRANSMISSION CONTROL CABLE ASSY
  9. Remove the nut from the control shaft lever.
  10. Disconnect the control cable from the control abaft lever.
  11. Remove the clip and disconnect the control cable from the control cable bracket.
  12. Disconnect the cable end from the rod of the floor shift assy.

Jun 09, 2011 | 2002 Toyota Highlander

1 Answer

Cant figure out how to remove key cylender from a 99 honda civic


TURN OFF RADIO.DISCONNECT NEGATIVE BATTERY CABLE.WAIT 20 MINUTES FOR AIRBAGS TO DISCHARGE.YOU NEED TO REMOVE THE STEERING COLUMN COVERS AND LOWER INSTRUMENT PANEL COVER.REMOVE THE IGNITION SWITCH.REMOVE THE RETAINING NUTS AND LOWER THE STEERING COLUMN.THE LOCK ASSEMBLY IS CLAMPED BY TWO SHEAR HEAD BOLTS.USE A CENTER PUNCH TO MAKE A DIMPLE IN THE HEAD OF EACH BOLT,THEN DRILL THE HEAD OFF WITH A 3/16 INCH DRILL BIT.SEPARATE THE CLAMP AND REMOVE THE ASSEMBLY FROM THE STEERING COLUMN. PLACE THE NEW LOCK ASSEMBLY IN POSITION WITHOUT THE KEY INSERTED AND TIGHTEN THE BOLTS UNTIL THEY ARE SNUG.INSERT THE KEY AND CHECK THE LOCK CYLINDER FOR PROPER OPERATION. TIGHTEN THE BOLTS UNTIL THEIR HEADS BREAK OFF.TIGHTEN STEERING COLUMN TO INSTRUMENT PANEL FLANGE NUTS TO 108 INCH POUNDS.TIGHTEN THE RETAINING COLLAR CLAMP BOLTS TO 16 FT LBS.

Apr 29, 2011 | Honda Civic Cars & Trucks

1 Answer

Looking for where the heater cord is located?


To remove and installing the Heater Core, check this procedure...
  1. Disconnect and plug the heater hoses at the firewall.
  2. Disconnect the heater valve control cable.
  3. Remove the heater unit attaching nut on the firewall.
  4. Remove the dashboard as follows:
    1. Remove the center panel.
    2. Disconnect the wire connectors at the fuse box.
    3. Disconnect the sunroof switch connector, if equipped.
    4. Disconnect the ground cable at the right of the steering column and the power mirror switch wire connector.
    5. Remove the side air vent knob and face plate.
    6. Remove the screws attaching the air vent control lever.
    7. Remove the center panel, radio and heater control head.
    8. Remove the gauge upper panel (4-door) or instrument panel (3-door).
    9. Disconnect the speedometer cable.
    10. Remove the center upper lid.
    11. Remove the side defroster garnishes on both ends of the dash.
    12. Lower the steering column.
    13. Remove the dashboard mounting bolts.
    14. Lift and remove the dashboard assembly.
1. Remove the heater duct.

zjlimited_113.jpg

Fig. 1: Removing the heater duct assembly

  1. Remove the steering column bracket and duct assembly.
  2. Remove the heater assembly mounting bolts.
  3. Remove the heater assembly and remove the heater core.
zjlimited_114.jpg

Fig. 2: Removing the heater case assembly

zjlimited_115.jpg

Fig. 3: Removing the heater core from the heater case


Hope this helps (remember to rate this answer).

Nov 23, 2010 | 1992 Honda Civic

1 Answer

Need to remove heater A/C dash control , what is proper procedure?


Look at fig. 4 for the heater a/c dash control: HEATER CORE Altima REMOVAL AND INSTALLATION
  1. Position the steering wheel in the straight-ahead position.
  2. Turn the ignition switch OFF.
  3. Disconnect the negative (() battery cable; then, the positive (+) battery cable. NOTE: Wait for a least 3 minutes after disconnecting the battery cables for the charge in the air bag circuit to dissipate before working on the air bag module(s).
  4. Remove the driver's side SRS and steering wheel by removing or disconnecting the following:
    • Lower lid from the steering wheel and disconnect the driver's air bag module connector
    • Left and right side lids from the steering wheel
    • Special bolts from both side of the steering wheel using a tamper resistant Torx wrench (T50)
    • Air bag module and store it face up
    • Horn's electrical connector and remove the steering wheel nut
    • Steering wheel from the steering column using a suitable puller
  5. Remove the passenger's side SRS by removing or disconnecting the following:
    • Glove box door and the glove box
    • Front passenger's air bag module connector
    • 2 special bolts using a tamper resistant Torx wrench (T50)
    • 4 passenger's air bag-to-instrument panel nuts
    • Front passenger's air bag module and store it face up.
  6. Drain the cooling system into a clean container for reuse.
  7. Discharge and recover the air conditioning system refrigerant.
  8. Working in the engine compartment, disconnect the heater hoses from the heater core tubes.
  9. Remove the instrument panel by removing or disconnecting the following:
    • Kick plate and dash side finisher on the driver's side
    • 2 lower panel-to-instrument panel screws and the lower panel on the driver's side
    • 2 lower reinforcement panel-to-instrument panel screws and the lower reinforcement panel
    • 6 steering column cover screws, the covers, the spiral cable and combination switch
    • 2 cluster lid "A" screws and the cluster lid "A"
    • 3 combination meter screws, disconnect the electrical harness connector and remove the combination meter
    • Switch panel
    • Instrument panel lower covers
    • Snap out the transmission shifter finisher (boot)
    • 4 cluster lid "C" screws and the cluster lid "C"
    • 4 audio and deck pocket-to-instrument panel screws and the audio and deck pocket
    • 5 center console screws and the center console
    • 2 center instrument panel screws and the center panel
    • front defroster grilles
    • Front pillar garnish
    • Instrument panel 3 nuts/4 screws and the instrument panel
    • 8 instrument stay assembly nuts and the stay
    • Steering member assembly 5 nuts/1 bolt and the steering member
  10. Remove the air conditioning housing assembly by removing or disconnecting the following:
    • Refrigerant lines from the air conditioning housing assembly
    • Thermo control amp
    • Air conditioning housing assembly
  11. Remove or disconnect the following:
    • Heater unit
    • Heater core from the heater unit Fig. 1: Exploded view of the steering wheel and air bag module 93112gd9.gif
      Fig. 2: Exploded view of the passenger's side air bag module 93112gd0.gif
      Fig. 3: Exploded view of the instrument panel assembly 93112ge1.gif
      Fig. 4: Exploded view of the heater housing assembly and related components 93112ge2.gif
      Fig. 5: View of the heater core and heater housing 93112ge3.gif
    To install:
  12. Install or connect the following:
    • Heater core to the heater unit
    • Heater unit
  13. Install the air conditioning housing assembly by installing or connecting the following:
    • Air conditioning housing assembly
    • Thermo control amp
    • Refrigerant lines to the air conditioning housing assembly
  14. Install the instrument panel by installing or connecting the following:
    • Steering member assembly and the steering member 5 nuts/1 bolt
    • Instrument stay assembly and the 8 stay nuts
    • Instrument panel and the instrument panel 3 nuts/4 screws
    • Front pillar garnish
    • Front defroster grilles
    • Center instrument panel and the 2 center panel screws
    • Center console and the 5 center console screws
    • Audio and deck pocket and the 4 audio and deck pocket-to-instrument panel screws
    • Cluster lid "C" and the 4 cluster lid "C" screws
    • Snap in the transmission shifter finisher (boot)
    • Instrument panel lower covers
    • Switch panel
    • Combination meter, connect the electrical harness connector and install the 3 combination meter screws
    • Cluster lid "A" and the 2 cluster lid "A" screw
    • Combination switch, the spiral cable, the covers and the 6 steering column cover screws
    • Lower reinforcement panel and the 2 lower reinforcement panel-to-instrument panel screws
    • Lower panel and the 2 lower panel-to-instrument panel screws, on the driver's side
    • Kick plate and dash side finisher, on the driver's side
  15. Working in the engine compartment, connect the heater hoses to the heater core tubes.
  16. Install the passenger's side SRS by installing or connecting the following:
    • Front passenger's air bag module
    • 4 passenger's air bag-to-instrument panel nuts
    • 2 new special bolts and torque using a tamper resistant Torx wrench (T50) to 11-18 ft. lbs. (15-25 Nm)
    • Front passenger's air bag module connector
    • Glove box door and the glove box
  17. Install the driver's side SRS and steering wheel by installing or connecting the following:
    • Steering wheel to the steering column
    • Steering wheel nut and torque the nut to 22-29 ft. lbs.
    • Horn's electrical connector
    • Air bag module
    • New special bolts to both sides of the steering wheel and torque the bolts using a tamper resistant Torx wrench (T50) to 11-18 ft. lbs. (15-25 Nm).
    • Both the left and right side lids to the steering wheel
    • Lower lid to the steering wheel and connect the driver's air bag module connector
  18. Refill the cooling system.
  19. Connect the positive (+) battery cable; then, the negative (() battery cable.
  20. Evacuate, charge and leak test the air conditioning system refrigerant.
  21. Operate the engine to normal operating temperatures; then, check the climate control operation and check for leaks.

Nov 19, 2010 | 2002 Nissan Sentra

2 Answers

There is coolant leaking on the passenger side underneath of the car and rear of engine. It doesn't seem to be the lower hose and both the rad and thermostat are new and appear to be dry. I suspect the...


agree, heater core. see procedure below


REMOVAL & INSTALLATION

  1. Disconnect the negative battery cable and disable the SRS system (if equipped.)
WARNING All SRS wire harnesses are covered with a yellow insulation. Read the SRS precautions found in this section and install the short connectors as described.
  1. Properly drain the cooling system.
  2. Disconnect and plug the heater hoses at the firewall.
  3. Disconnect the heater valve control cable.
  4. Remove the heater unit attaching nut on the firewall.
  5. Remove the dashboard as follows:
    1. Remove the center panel.
    2. Disconnect the wire connectors at the fuse box.
    3. Disconnect the sunroof switch connector, if equipped.
    4. Disconnect the ground cable at the right of the steering column and the power mirror switch wire connector.
    5. Remove the side air vent knob and face plate.
    6. Remove the screws attaching the air vent control lever.
    7. Remove the center panel, radio and heater control head.
    8. Remove the gauge upper panel (4-door) or instrument panel (3-door).
    9. Disconnect the speedometer cable.
    10. Remove the center upper lid.
    11. Remove the side defroster garnishes on both ends of the dash.
    12. Lower the steering column.
    13. Remove the dashboard mounting bolts.
    14. Lift and remove the dashboard assembly.

  6. Remove the heater duct.
    177f070.gif

Fig. Fig. 1: Removing the heater duct assembly

  1. Remove the steering column bracket and duct assembly.
  2. Remove the heater assembly mounting bolts.
  3. Remove the heater assembly and remove the heater core.

07c9641.gif

Fig. Fig. 2: Removing the heater case assembly

82ed899.gif

Fig. Fig. 3: Removing the heater core from the heater case


To install:

  1. Install the heater core into the heater unit.
  2. Install the heater assembly and the attaching bolts.
  3. Install the heater duct and steering column bracket.
  4. Install the dashboard assembly. Tighten the mounting bolts until just snug.
  5. Raise and attach the steering column.
  6. Install the center upper panel.
  7. Connect the speedometer cable and install the instrument gauge assembly.
  8. Install the control head, radio and center panel.
  9. Install the side vent and face plate.
  10. Connect the ground cable at the right of the steering column and the power mirror switch wire connector.
  11. Connect the sunroof switch connector, if equipped.
  12. Connect wire connectors at fuse panel.
  13. Install the heater unit attaching nut on the firewall.
  14. Connect the heater valve control cable.
  15. Connect the heater hoses at the firewall.
  16. Connect the negative battery cable.
  17. Fill, bleed and leak check the cooling system.

Oct 05, 2010 | 1991 Honda Civic

1 Answer

I need a diagram on how to remove a heater core in a 1994 mercury villager


big job. entire heater plenum has to come out. 6 hour job.

http://groups.yahoo.com/group/villagerquest/

Instrument Panel Removal
  1. stv~us~en~file=ani_caut.gif~gen~ref.gif WARNING: THE BACKUP POWER SUPPLY ENERGY MUST BE DEPLETED BEFORE ANY AIR BAG COMPONENT SERVICE IS PERFORMED. TO DEPLETE THE BACKUP POWER SUPPLY ENERGY, DISCONNECT THE BATTERY GROUND CABLE AND WAIT 10 MINUTES.
    Disconnect the battery ground cable (14301).
  1. Remove the access cover from the bottom of the steering wheel (3600) and disconnect the driver side air bag module electrical connector.
  1. Open the glove compartment, then pull the access panel from the top of the glove compartment. Disconnect the passenger side air bag module electrical connector.
  1. Remove the four console compartment plastic screws or C/D changer cover plastic screws (if equipped) and the console compartment door (045G36) or C/D changer cover.
  1. Remove the two LH inner instrument panel lower cover screws and the plastic nut.




  1. Remove LH inner instrument panel lower cover (044L97) and disconnect the foot lamp electrical connector.
  1. Remove the two RH inner instrument panel lower cover screws and the plastic nut.
  1. Remove RH inner instrument panel lower cover (045G22) and disconnect the foot lamp electrical connector.
  1. Remove the plastic screw, two lower screws, two center bolts, two upper screws and the screw at the instrument panel bracket, then separate the glove compartment from the instrument panel (04320). Disconnect the glove compartment striker plate catch electrical connector.




  1. Remove the two instrument panel to passenger side air bag module bracket bolts.




  1. Remove the four passenger side air bag module nuts and the passenger side air bag.
  1. Remove the RH instrument panel screw.




  1. Remove the four C/D changer screws.




  1. Remove the C/D changer and disconnect the C/D changer electrical connector.
  1. Remove the instrument panel ash receptacle (04810).
  1. Remove the two upper center instrument panel finish panel screws and the two lower center instrument panel finish panel screws.




  1. Remove the center instrument panel finish panel and disconnect the cigar lighter socket and the cigar lighter illumination lamp electrical connectors.
  1. Remove the two instrument panel ash receptacle bracket screws and the instrument panel ash receptacle bracket. Disconnect the instrument panel ash receptacle lamp electrical connector.
  1. Carefully pry the center A/C register from the instrument panel.




  1. Remove the hose from the ambient temperature sensor and disconnect the ambient temperature sensor electrical connector (if equipped).
  1. stv~us~en~file=ani_caut.gif~gen~ref.gif CAUTION: Electronic modules are sensitive to static electrical charges. If exposed to these charges, damage may result. Refer to Module Service Procedures in Section 18-01 .
    Remove the four radio chassis bracket screws and pull the radio chassis (18806) and climate control assembly from the instrument panel.
  1. Disconnect the three radio chassis electrical connectors, the antenna lead, the three climate control electrical connectors and remove the radio chassis and climate control assembly.
  1. Remove the plastic screw, the two instrument panel steering column cover screws and the instrument panel steering column cover (04459).
  1. Remove the four LH instrument panel reinforcement bolts and the LH instrument panel reinforcement. Disconnect the diagnostic electrical connector.




  1. stv~us~en~file=ani_caut.gif~gen~ref.gif CAUTION: Electronic modules are sensitive to static electrical charges. If exposed to these charges, damage may result. Refer to Module Service Procedures in Section 18-01 .
    Remove the instrument cluster (10849). Refer to Section 13-01A (electronic cluster) or Section 13-01B (conventional cluster) for the removal procedure.
  1. Disconnect the seat belt warning chime electrical connector. Remove the two seat belt warning chime screws and the seat belt warning chime.
  1. Remove the four steering column nuts and lower the steering column assembly.
  1. Remove the two LH instrument panel screws.




  1. Remove the center instrument panel screw.




  1. Remove the LH inner duct screw and the LH inner duct.




  1. Disconnect the power outside rear view mirror control switch electrical connector.
  1. Pull off the upper portion of the LH inner door opening weatherstrip. Remove the windshield side garnish moulding (03598).




  1. Pull off the upper portion of the RH inner door opening weatherstrip. Remove the windshield side garnish moulding.
  1. Remove the instrument panel upper moulding (04268) and disconnect the sun sensor electrical connector (if equipped).
  1. Remove the light sensor amplifier from the top right side of the instrument panel and disconnect both light sensor amplifier upper and lower electrical connectors (if equipped).




  1. Remove the instrument panel center nut.




  1. Remove the two instrument panel upper bolts.
  1. Remove the instrument panel from the vehicle.

May 20, 2010 | 1994 Mercury Villager

2 Answers

How do i replace the bulb in the digital clock on a 96 (s reg) honda civic thanks


Hi,

The digital clock assemblies are a single unit - if the LED panel inside the clock fails, then you would replace the entire clock assembly.

Ensure you check the clock fuse hasn't blown, before suspecting the actual clock as faulty.

Cheers,


"If this has helped you in any way, please rate this solution"

Jan 27, 2010 | 1997 Honda Civic

1 Answer

How to remove & replace center AC / heater vent in 2001 Honda Civic ?


They are held into the dash with plastic "spring" out retainers on the dash register. Use a thin blade like a putty knife to disengage the locks.

Jul 06, 2017 | 2001 Honda Civic

1 Answer

1995 Honda Civic Hatchback Rear window


It is possible to change this window on your own. But it is a pain in the ***. So im gonna tell you the easiest thing to do is either go to a junkyard and buy the whole hatch which is relatively cheap. Or you can just call any general glass repair shop and they will come fix this for around $125to 200 bucks. If it were me i would go to the salvage yard.

Sep 04, 2008 | 1995 Honda Civic

2 Answers

How to replace heater core 93 honda del sol


Heater Core Honda Civic/CRX/del Sol 1984-1995 Repair Guide REMOVAL&INSTALLATION
See Figures 1, 2 and 3
REMOVAL & INSTALLATION
  1. Disconnect the negative battery cable and disable the SRS system (if equipped.)
WARNING All SRS wire harnesses are covered with a yellow insulation. Read the SRS precautions found in this section and install the short connectors as described.
  1. Properly drain the cooling system.
  2. Disconnect and plug the heater hoses at the firewall.
  3. Disconnect the heater valve control cable.
  4. Remove the heater unit attaching nut on the firewall.
  5. Remove the dashboard as follows:
    1. Remove the center panel.
    2. Disconnect the wire connectors at the fuse box.
    3. Disconnect the sunroof switch connector, if equipped.
    4. Disconnect the ground cable at the right of the steering column and the power mirror switch wire connector.
    5. Remove the side air vent knob and face plate.
    6. Remove the screws attaching the air vent control lever.
    7. Remove the center panel, radio and heater control head.
    8. Remove the gauge upper panel (4-door) or instrument panel (3-door).
    9. Disconnect the speedometer cable.
    10. Remove the center upper lid.
    11. Remove the side defroster garnishes on both ends of the dash.
    12. Lower the steering column.
    13. Remove the dashboard mounting bolts.
    14. Lift and remove the dashboard assembly.
  6. Remove the heater duct.
0900c15280061a21.jpgFig. 1: Removing the heater duct assembly
  1. Remove the steering column bracket and duct assembly.
  2. Remove the heater assembly mounting bolts.
  3. Remove the heater assembly and remove the heater core.
0900c15280061a22.jpgFig. 2: Removing the heater case assembly 0900c15280061a23.jpgFig. 3: Removing the heater core from the heater caseTo install:
  1. Install the heater core into the heater unit.
  2. Install the heater assembly and the attaching bolts.
  3. Install the heater duct and steering column bracket.
  4. Install the dashboard assembly. Tighten the mounting bolts until just snug.
  5. Raise and attach the steering column.
  6. Install the center upper panel.
  7. Connect the speedometer cable and install the instrument gauge assembly.
  8. Install the control head, radio and center panel.
  9. Install the side vent and face plate.
  10. Connect the ground cable at the right of the steering column and the power mirror switch wire connector.
  11. Connect the sunroof switch connector, if equipped.
  12. Connect wire connectors at fuse panel.
  13. Install the heater unit attaching nut on the firewall.
  14. Connect the heater valve control cable.
  15. Connect the heater hoses at the firewall.
  16. Connect the negative battery cable.
  17. Fill, bleed and leak check the cooling system.

Sep 01, 2008 | 1996 Honda Accord

Not finding what you are looking for?
1996 Honda Civic Logo

Related Topics:

137 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...