Question about 1999 Ford Taurus

1 Answer

1999 Ford Taurus, air flow control dial on the inside consol. I e

You can turn the air/heat on and it works but when you try to have it blow low, medium, or high it only goes to high or nothing at all. So its either your freezing or burning up

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 31 Answers

It sounds like your blower motor resistor is bad. This should be located under the dash close ( within about a foot) of the actual blower motor

Posted on Apr 14, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

2002 Ford Taurus, Heater blows cold air?


What have you checked so far ?
Radiator full of coolant ? Heater hoses getting hot ?

Feb 23, 2015 | 2002 Ford Taurus

2 Answers

1999 f-150 air blows stops blowing heat blows out cold then overheats


First The heading says 99 Taurus but the question says 99 f-150. Second, are you saying that the engine is overheating? The heater won't work if the level of coolant is low and that would explain overheating. The thermostat controls the temp of the heat, so if it is stuck closed then water can't circulate to the heater and the vehicle would overheat, but this is unlikely.

the other answers seem to concentrate on a non-working heater. Good luck with this problem.

Mar 05, 2014 | 1999 Ford Taurus

1 Answer

2003 ford taurus blows lukewarm when the heat is on. Blower blows fine and a/c works great.


Check out the heater hoses for warmth. Both should be the same with the water flowing. If they are not, the water is not circulating.

There are 2 ways the heater can work. One style varies the amount of water flow to control the heat levels. The other uses the blend flaps in the ducts to push air flow around the heater core.

If the heater hoses are not circulating water, a part called a flow valve is to blame. Check out the autoparts sites for photos of the flow valve for your car. If you have the blend flap system, a solenoid called a "motor" is not changing the position of the blend flap in the dashes' ductwork.

Oct 01, 2012 | 2003 Ford Taurus

1 Answer

1999 ford taurus no heat blowing out of vents cool air blows out has a new t-stat ,antifreeze is fine,


Hi Ron,

Blend air door actuators fail often in Ford Taurus. It sounds like that may be the problem with yours. For more information regarding this subject, please read the following article:

Why Is My Hater Cold?

Dec 27, 2011 | 1999 Ford Taurus

1 Answer

98 Ford Taurus Heat blows Full no matter how hot it is in the car and even though the Temp is turned down to 60. Also A/C does not work Blows Heat instead not just warm air actual heat. Can turn down fan...


The heater door is probably stuck in the full heat position. It could be a problem with the heater door motor or the controller - you'd have to check for both mechanical and electrical problems under the dashboard.

Feb 21, 2011 | 1999 Ford Taurus

1 Answer

My 1999 ford windstar is only blowing cold air and no heat


possable problems:

1. coolant leak (level too low to fill heater core)
2. headgasket leak forcing the coolant out of the overflow.
3. stuck thermostat.
4. bad water pump. if the impelers are broken, coolant wont flow.
5. HVAC malfunction. system may think you selected cold or is unable to move diverter. maybe a fuse,solenoid or vaccum leak? (hvac controler uses vaccume controled soleniods)
6. airlock. if you have resently changed your coolant, you may need to repeatedly squeeze the heater core hose to help force out the air.

May 19, 2010 | 1999 Ford Windstar

1 Answer

1999 Ford Taurus 3.0l EFI 6cyl, Heater does not work, only blows cold air, have already flushed the radiator cooling system, and installed a new thermostat, still cold air. Anyone's help will be Greatly...


It could be air locked. Feel both your heater hoses, and, with the engine running, loosen the one that's cold, if there is one. If that doesn't help, it is probably your heat control valve that is malfunctioning.

Jan 08, 2010 | 1999 Ford Taurus

1 Answer

I have a 1999 ford taurus i feel heat after turning on heat control but with in less then a min the air feel cool


sounds like a blend door motor problem it controls the air flow over the heater core and over the A/c evaporator ,see a technician

Oct 20, 2009 | 1999 Ford Taurus

2 Answers

2001 Ford Taurus blowing hot air from the vents


try removing your negative battery terminal for up to half hour ive heard the same prob in taurus before and that fixed it if it doesnt work let me know and ill try another solution

Jun 04, 2008 | 2001 Ford Taurus

Not finding what you are looking for?
1999 Ford Taurus Logo

182 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...