Question about 2001 Ford Taurus

1 Answer

My 2001 ford taurs is squeeling what is the problem

We changed a few pullies it stipped for a bit now its doing it again

Posted by on

  • 1 more comment 
  • gerry bissi May 11, 2010

    doing waht again.

  • Josh Rucker May 11, 2010

    Is the engine 3.0 or 3.0 DOHC ?

  • Nathanh29 May 11, 2010

    Is this while you apply the breaks or when does it occur?

    While the car is idle? Driving?


×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 224 Answers

I have a similar problem on my 99 OHV 3.0L. On mine, it's the a/c compressor. Hope this helps a little. Sounds like there's a bird trapped under the hood.

Posted on Jun 03, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

What could cause my ford taurus 03 to cause such a loud squeeling noise?


it maybe the synchroniser which is under the throttle body (and houses the cam sensor)and makes the same noise. use a rubber hose to pimpoint the location of the noise

Sep 17, 2014 | 2003 Ford Taurus

1 Answer

2001 ford taurus a/c compresser was squeeling, we put on new compressor and it worked great and then started the squeeling again. I was told this might be a part called an accumalator or something. Since...


It sounds like the head presser is to high...this will cause the compressor to stall, makeing the belt squeel...the accumalator should have been changed with the compressor...if accumalator is bad, it probably clogged the orifis tub and this is were the blockage is...An accumalator "aka" (dryer) has a carbon filled bag in it....this takes moister out of the a/c freon, the bags are knowen to brake open...
I'am sure your compressor is OK, have the system completely flushed and change the accumalator and orifis tube and you should be good to go....
Sure hope this is some help to you ?

Jun 28, 2011 | 2001 Ford Taurus

1 Answer

I have a 2001 Sonata. I have a squeeling pulley.


It sounds like you have a worn or streched belt making the sqeeling noise. Whenever you turn on a
device in the car that draws a fair amount of voltage
ie. a/c or headlights it will cause increased drag on
the alternator and if you have a loose/worn or glazed
belt, it can slip around the pully making the squeel.
To adjust the alt-a/c belt loosen the mounting bolts
on the tensioner, then use the adjuster bolt behind
the tensioner pully to loosen and tighten the belt.
Be sure to check the belt for cracks bald spots etc.
While the belt is loose spin the pullys to make sure
they all spin freely. Also I would replace the belt just
to be sure. Hope this helps

Jul 04, 2010 | 2001 Hyundai Sonata

1 Answer

2001 Acura MDX loud fan


if it is squeeling, check all pullys that the belts ride on, its posible a pully has bad barings

Aug 18, 2009 | 2006 Acura MDX

1 Answer

Belt inst


For the 3.0L Vulcan, you have a tensioner that is located just below the power steering pully. Use a 15mm wrench or the 15mm shallow well socket that comes in a Serpentine Belt tool to push the tensioner toward the rear of the engine compartment. Take the old belt off and route the new belt. The belt begins at the crankshaft pully, goes under and around the a/c compressor, up around the power steering pump, around (with the flat edge) the idler pully, around the alternator, the flat edge then sits against the tensioner and back around to the water pump pully. You should have a belt routing diagram on the underside of the hood just above the serpentine pully assembly.

Jun 23, 2009 | 1999 Ford Taurus

1 Answer

2001 f150 supercrew 125k miles


Have the trans flush and filter changed cost $129 and up to $200. Power steering pump check fluid level first. If the level is correct check belt for cracks and dry rott the belt may be slipping replace it. If squeel is still there then you need to replace the power steering pump.

May 29, 2009 | 2001 Ford F150 Styleside SuperCrew

1 Answer

Can't change power steering belt on 2001 toyota echo


take a look some pullies are spring loaded and it may require a ( not recommend unless stuck) but a pry bar. if spring loaded is the case there should be a tool that you could rent that is use for prying the pulley.

Note: make sure to release slowly so not to damage pulley.

May 08, 2009 | Toyota ECHO Cars & Trucks

1 Answer

No heat for 2 days 2001 ford tarus


Have you checked your coolant level & topped it up to mark?

Jan 06, 2009 | 2001 Ford Taurus

Not finding what you are looking for?
2001 Ford Taurus Logo

Related Topics:

132 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

fordexpert

Level 3 Expert

5546 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...