Question about 2004 Nissan Quest

1 Answer

Sliding door won't close. 2004 nissa quest

My right sliding door won't close. It gets half way and then thinks it hits somethign and opens back up. It does this about half of the time. There is nothing blocking it either.

Is there a way to shut off the safty sensor or fix this

Posted by on

  • markcrosenth Apr 28, 2009

    Not yet. But the recall was not for the sensor. It was for something else on it.

  • slicker213 May 11, 2010

    There was a recall for the sliding door actuator on some models. Did you have that fixed?

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Mine was doing the same thing. I took it in and watched them fix it and first they steam cleaned the area under the floor where the rollers are. Then they took a spray and lubricated the rollers and the track where the rollers are. then they cleaned the brass connectors on the side of the door where the safety pins touch. I could have saved ALOT of money doing this myself. I hope this helps!

Posted on May 12, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Drivers side sliding door won't close


check mechanism on working doors. In my car if I move the catch on the door(click it like in closed position)like it was closed,then when I open the handle it releases open;this shows me closing/opening. Spray penetrating fluid on the metal/mechanism,possibly rusty and prevents smooth actions. Hope this helps.

Jan 01, 2014 | 2004 Nissan Quest

1 Answer

2006 Honda Odyssey electric door won't close


there is a slide door control module for each door

Jan 28, 2013 | 2006 Honda Odyssey Touring

2 Answers

The power door on our 1998 Silhouette van will not close. The door starts to close and at the last second, as it starts to touch the locking mechanism, it retreats as if there is some resistance. The...


Your problem is the door thinks that it is already locked and closed. You need have the sliding door unlocked, have someone pull the handle as if they were going to open the door and then use a tool to "Open" the latch that normally would hold the door closed.

Jul 02, 2011 | 1998 Oldsmobile Silhouette

1 Answer

The van was hit on the back passenger side resulting in a dent . The open door light along with the interior lights flashed when I hit a bump. I hear something that sounds like a fan continuosly blowing....


I think this may be the "closer" motor continuously trying to gain a positive latch--and unable to do so. This could be from a damaged latch switch.

The sliding door has three motors, a slide motor, a release (or unlatch) motor, and a closer (or latching) motor. The open door light and interior lights coming on seem to indicate that the "closed and latched" switch is sometimes open-- allowing the closer motor to continue to operate.

Another possibility is that the dent has changed the geometry of the door mechanism especially the draw of the pull cable. The slide motor has a sensor that pulses when it runs. The door management controller counts the number of pulses of the slide motor sensor to determine when the door is fully closed and then stops the slide motor. At that point, the closer motor operates to latch the door. If the cable geometry has changed, the door controller may be shutting off the slide motor prematurely and the closer motor cannot complete the latch.

Mar 28, 2011 | 2000 Honda Odyssey

2 Answers

All doors unlocked and rear hatch won't open what is causing problem


you may find that the rod that goes to the latch and the handle has fallen off, causing the door not to open. what you can do is try take the door card off with rear hatch still closed, and try to re attach it

Feb 26, 2011 | 2004 Buick Rendezvous

1 Answer

My power sliding door doesn't open fully. It makes clicking sound and a somewhat of a jerking motion. It open or closes slighty but the entire it makes the above mentioned noises. Any help would be...


I'm not sure about the noise, but the jerking motion might be because your the center roller (located in the rear middle of the sliding door) has worn out and need to be replace. This is a will known problem.

Your problem is very hard to answer because 05-10 odyssey has so many problem with sliding door.

rear latch:
-door not to latch close
-door not to work

front latch:
-door not to open

lock actuator:
-door not to open
-door will pop when opening

window motor:
-window not to work
-door will only open half way

center roller:
-jerking motion when opening
-door kick back close while opening
-door kick back open while closing

Door motor:
-door not to work
-cause door to jam

good luck

Dec 17, 2010 | 2005 Honda Odyssey

2 Answers

I hit passenger sliding door on garage door while


the door is out of adjustment. you could also have something bent. those are very heavy doors and I would recommend to take it to a honda dealer only for repairs. I helped a gentleman in your exact same situation and it took a 20 year tech all day to get it right.

Feb 05, 2010 | 2005 Honda Odyssey

1 Answer

My 1997 Nissa Quest transmission engages intermittently. The code reader give output shaft speed error. Is my vehicle toast?


No it's not , there's an out put and in put shaft speed sensor, can be replace , if your not sure what it look's like go to a trans parts place not auto parts they wont have it. It is held on by a 8 or 10 mm bolt and slide out.

Dec 30, 2009 | 2004 Nissan Quest

2 Answers

I have a 2003 Astro - interior issues


I had the same problem and found that my sliding side door "closed" switch, which is small and round and in the door frame, was not being pushed open all the way when the door was closed! As soon as I put a credit card in the spot where the switch hits the door all the locks and lights worked again. So I just taped a washer to the door where the pin switch hits it for now. The computer thinks the door is still open and will not alow them to lock and the lights won't operate right either.

Aug 04, 2009 | 2003 Chevrolet Astro

Not finding what you are looking for?
2004 Nissan Quest Logo

855 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...