Question about Honda Civic

1 Answer

Fitting a standard towbar wiring kit to a 1998 rover 420

I have recently fitted a towbar to my 1998 Rover 420 . I have fitted a standard 12n electric kit and i have both tail lighs both brake lights hav e right side indicator but how do i wire in the left hand indicator ?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,902 Answers

There should be a wiring harness under the kick panel under either the rear of the vehicle right next to the light (plugs into adapter) or it is under the kickpanel on the passenger side of the vehicle where there foot would be next to the door under the dash

Posted on Apr 14, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i fit a towbar to a landrover discovery 2


towbar on a disco 2 is a straight forward bolt on job it attaches to the rear chassis and crossmember any good quality towbar kit will come with all bolts and washers you need plus instructions . if you get genuine landrover electrics they plug straight in without having to cut or join any wires.

hope this helps

Sep 14, 2010 | 2003 Land Rover Discovery

1 Answer

Hse td4 rear sensor intermittant continuous beep on reverse selection - towbar not fitted


one of the sensor's wire might be short circuit so if you are able to open the bumper just check the wires those going to the sensors. if it didn't help come back to me

Jul 06, 2010 | 2002 Land Rover Freelander

1 Answer

I need to charge my a/c 98 range rover. I have


The two nozzles should be different in size. The smaller one is the High. The bigger one is the Low. Your recharge kit will fit securely only on the Low. It should engage and lock in place.

Apr 02, 2010 | 1998 Land Rover Range Rover

1 Answer

Towbar question


you have to buy a towbar for your model car . as the mounting hole will be there, if you try and fit any towbar and drill holes it will affect the structure of the car the wiring for the tow bar is universal and if you get a wiring kit it will tell you how to wire it in,

Jan 03, 2010 | 1999 Daewoo Lanos

1 Answer

How to fit a megan towbar 54 reg oasis


Firstly you need to know the make of the towbar, then you can download the fitting instructions from the towbar manufacturers website. As far as electrics are concerned, I would recommend NOT using the secondhand electrics that you have unless you have a dedicated plug-in wiring kit as the wires were probably cut and may now be too short to use and the sockets may not be in tiptop condition, It's well worth the small expense af replacing them. The actual wiring will depend on what year and model the car is.

Sep 17, 2009 | 2004 Renault 181

1 Answer

All stop lights not working just fitted towbar worked when first fitted


u have shorted out the brake lights, disconnect the tow bar and replace the fuse, the tow bar wiring is shorting out

Sep 04, 2009 | 2004 Land Rover FreeLander

1 Answer

Cant find the towbar electrics plugs for x-type


I assume that the towbar didn't come with a proper wiring kit as, unfortunately there is not a specific connector for the towbar wiring on the x-type, the proper Vehicle Specific Kit plugs into the rear light. There is a power connector with three pins on the left and a grey reverse sensor cut out connector also on the left. but you will either need to use a Vehicle Specific Wiring kit (about £175) or use a bypass relay system.

Aug 30, 2009 | 2006 Jaguar X-Type

2 Answers

Volvo V70 2001.. Plugs For Towbar Electric's??


You can get an adapter that fits in to the 13 pin socket that give you a 12N socket, easily available on E-bay

http://cgi.ebay.co.uk/13-to-7-Pin-Adaptor-for-Euro-Style-Towbar-Electrics_W0QQitemZ110303426204QQihZ001QQcategoryZ36631QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

I have one for my car and it does the trick

Sep 30, 2008 | 2001 Volvo V70

1 Answer

Problems with our recently purchased used Range Rover


This seems too bad wiring or major short in the car which is causing the fuse to blow ,change the wiring of the car .

Jun 05, 2008 | 1998 Land Rover Range Rover

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

290 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...