Question about 2000 Hyundai Accent

1 Answer

Dashboard Vibration I have a loud vibration at the top of each gear, just before the gear change. a few months ago I had a new speedo fitted along with a couple of bulbs and the vibration stopped completely but has since returned. It suggest to me that it's somethong vibrating within the dashboard. How do I fix this? Do I need to take the dashboard off to do it and if so how do I do that ?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,004 Answers

The vibration should be from the gear mounting. Please let an expert have a look at this for you. You might stay close so you see how it is been done. In case.

That is the way I handle my own whenever I need an expert to work on em.

take care.

Rate this please.

Posted on Apr 14, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Audi S3 2009 has had an increase in engine vibration and Revs by itself.


check the engine mounting for damages & transmission mounting.also check the mounting bolt for looseness and tight...

Nov 19, 2015 | Audi Cars & Trucks

1 Answer

Steering Wheel Vibration


Check your brake caliber.

Sep 03, 2012 | 2007 Toyota Camry

1 Answer

I have a 2004 6cyl. trailblazer EXT. My check engine light has been coming on then going off for quite some time. Had catalytic converter replaced 2 years ago, put on new gas cap a year ago, and...


More than likely, you have a failed fan clutch. That is a frequent problem on the 4.3 I6 engine. It will cause a roaring noise and "vibration" and allow the engine to overheat at low road speeds. As far as your check engine light and other driveablity problems, it may or may not be associated. Have someone with a code reader check it. The TrailBlazers were infamous for electrical gremlins.

Sep 05, 2011 | 2004 Chevrolet TrailBlazer

1 Answer

Engine vibration coming down to first gear


Sounds like outer carrier axel bearing problem. Safety hazard exist. It could lockdown and damage your brake components. Investigate soon. Change both CV axels when you replace the bearings. You will be money and time ahead.

May 22, 2017 | 2002 Mitsubishi Lancer

1 Answer

Gear stick vibration only in 3rd gear @ 2500 rpm on my new 2009 Tucson 2l any idea what causes this,as dealer says new "PART" needs to be fitted


My brand new 2009 Tucson has the same problem. My dealer said it needs a 3rd Gear Kit fitted.
They are on back order as a number of other Tucson's have the same problem. I may have to wait 3 months for the part.
My dealer has ordered 126 back order parts for this problem.


Nov 18, 2009 | 2009 Hyundai Tucson

1 Answer

Vibration in front end


If it were an issue with the ball joint you would also notice the vibration when turning on bends, especially the tight ones.

You may also want to check wheel balance if it is OK

Jun 04, 2009 | 1989 Ford Bronco

2 Answers

Vibration/Whinning Noise while drivin


Check fuel pump pressure. sounds silly but my 1500 ram van did this 2 months . replaced a lot of parts then left me sitting on side the road. Cause was fuel filter and pump.

Apr 20, 2009 | Dodge Ram 1500 Cars & Trucks

2 Answers

Loud roar or vibration


Start by inspecting your tires. Look for uneven tread ware, tire separation (a bubble) on the inside or outside. Then change the fluid in your front and rear differential. This will tell you if you have a gear problem. Change the fluid in your transfer case also for indication of a gear problem.

Jul 10, 2008 | 1999 GMC Suburban

Not finding what you are looking for?
2000 Hyundai Accent Logo

Related Topics:

373 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8826 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...