Question about Honda Pilot

Open Question



Posted by on


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

  • 4 Answers


good luck that's a real biggy

Posted on Sep 25, 2008

  • 89 Answers

SOURCE: Adjust valve clearances 1987 toyota corolla

Im assuming its an 4AGE!?
And here one of my favorites...;)

Posted on Oct 07, 2008

  • 54 Answers

SOURCE: Need Valve clearance for '93 kh ford laser

0.10 - 0.15mm inlet
0.18 - 0.23mm exhaust
but you must be carefull because the top of the valve seat becomes concave from wear, a feeler guage will not give the most accurate reading, hope i have been of some hel

Posted on May 14, 2009

  • 105 Answers

SOURCE: how to adjust valves on a 460 ford

if I recal,there not adjustable,seems like you just tighten down the rockers

Posted on Jan 26, 2010

  • 87 Answers

SOURCE: how to adjust valve clearance on a 1999 sunfire

There is no valve adjustment for that engine, Hydraulic lifters, You might remove the valve cover and see if you have a rocker arm loose

Posted on Mar 13, 2010

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Need valve lash specs for 1980 suzuki dr400

Suzuki DR400S - Motorcycle Specs
1980. Engine. Air cooled, four stroke, single cylinder, SOHC, 2 valves per cylinder ....Valve adjustment can be done without a feeler gauge and the CDI has ..

Dr400 valve adjustment 1 - YouTube

? 2:08
Nov 19, 2010 - Uploaded by obtrailriders
Dr400 valve adjustment 1. ... Suzuki DRZ 400 Valves clearance check \ sprawdzanie luzu zaworowego PART 2 ...

Nov 01, 2015 | Suzuki Cars & Trucks

1 Answer

What is the valve clearance on 3.0 flex fuel

Valve lash adjustment, is mostly all hydraulic with no adjustments, if you are experiencing some sore of noise for lifters try desludging the engine using aa motor treatment. Follow all directions. When I rebuilt heads most lash adjustments are 8 to 10 thousandths for intake and 10 to 12 thousandths for exhaust. Also timing components can also sound like lifters, in some cases a bad waterpump causes weird sounds too.. please try to ask more specific questions.

Feb 28, 2015 | Cars & Trucks

1 Answer

What is the the valve calibration for a Honda crv 1997

I think you are referring to the clearance of the valves. Intake and exhaust valves have different clearance. There is a procedure how to do it and the tools you need.

Feb 21, 2015 | Honda CR-V Cars & Trucks

1 Answer

Is valve lash damaging? And should I get it fixed soon?

the valve lash ( clearance) should be hydraulic and self adjusting. If you have a noise it may be from rocker bushes and rocker arm. Any valve noise means that the correct valve timing is not happening so that affects power and economy.

Feb 16, 2015 | 2004 Mitsubishi Endeavor

1 Answer

What are the valve lash specs for 2007 Honda Accord V6?

There is a specific procedure for setting valve clearance . I highly recommend getting a repair manual for the correct specs & procedure. The engine must be at TDC with the #1 cylinder on the compression stroke , that will allow you to adjust ONLY certain valves , then you have to turn the engine one turn to TDC again only now #1 will be on the exhaust stroke & the rest of the valves can be adjusted . it's important that you know the difference between the two !

Jan 08, 2015 | Honda Cars & Trucks

1 Answer

Valvues calibrate

where are you on this car, there are 3000 parts
state a system.
like engine.
the state what part of that?
if it is an engine question , do tell which one you have first
because we can not guess.
here are our, in N.American there are others.
generation 3. engine.
3.5 L V6 210 hp J35a6 OR a7 ENGINE.
3.5 L V6 244 hp (2005)
244 hp (2006) j35A6 OR a7 If touring model.
241 hp (2007-2010)

other counties use.
2.4L 160 PS (118 kW; 158 hp) or 200 PS (147 kW; 197 hp) I4
totally different engines and EFI systems

my guess, is your are reading in some book to adjust
the engine Head valve lash adjusters
if yes, its dead wrong, these engines are HLA
(automatic lash adjusters)

admition,, what is this word.?

Feb 26, 2014 | 2006 Honda Odyssey

1 Answer

What is the valve lash adjustment for a 2001 hyundai Accent L 1.5 liter?

automatic valve lash adjusters are used in the 1.5L valve clearance is not adjustable.

Jan 29, 2011 | Hyundai Accent Cars & Trucks

2 Answers

Overhead valves making noise like they need ajusting

Valve Lash ADJUSTMENT 1.6L Engines NOTE: Measure valve clearance with the engine cold.
  1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
  2. Remove the valve cover.
  3. Set the engine to Top Dead Center (TDC) of the compression stroke for the cylinder to be adjusted.
  4. Check the valve clearance. The valve clearance specifications are as follows:
    • Intake valves: 0.005-0.007 inches (0.13-0.17mm)
    • Exhaust valves: 0.005-0.007 inches (0.13-0.17mm)
  5. After adjustment, tighten the locknuts to 11-14 ft. lbs. (15-19 Nm).
  6. Repeat for each valve to be adjusted.
1.8L, 2.0L and 2.5L Engines The 1.8L, 2.0L and 2.5L engines utilize automatic hydraulic lash adjusters to maintain proper valve lash at all times. Periodic valve lash inspection and adjustment is not necessary or possible. prev.gif next.gif

Sep 14, 2010 | 2000 Chevrolet Tracker

1 Answer

Valve lash 91 honda crx si 1.6 sohc

For this engine the valve lash if; Intake .007-.009 and the exhaust valves are .009-.011. Be sure to adjust these when the engine is cold, as a warm exgine will affect the measurements. The locknuts should be torqued to 10 ft/lbs. REMEMBER..."loose is good" other words when adjusting the valves DO NOT make them "tight feeling" with the feeler gauge. If you do, you run the very real danger of burning the valves. Honda, I believe, recommends that you should check these every 15k to 24k miles. Happy motoring !

Jun 29, 2010 | 1991 Honda CRX

1 Answer

Valve adjustment

tiburon uses hydrolic lash adjusters there are no valve lash adjusting If you hearing a pecking sound on the top of the mtr try some oil additive or replace the hydrolic lash adjusters

Jun 15, 2009 | 2001 Mitsubishi Eclipse

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

615 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts


Level 3 Expert

78257 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides