Question about 2003 Dodge Neon

1 Answer

I can't get to the back of the driver side headlamp assembly to pull out the bulb. Any ideas? I have a 2003 Dodge Neon SXT.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

Is it behind the air cleaner? if so, you will need to remove the cover and then you'll have access to it. replace the bulb and then replace the cover.

Posted on Jun 17, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Plate bulb 2003 dodge neon sxt how to change


first remove the 2 screws from the bulb holder,just above the tag,the entire bulb holder wlil come out,so you can change your bulb. replace bracket opposite the wayyou removed it. your done!

May 31, 2014 | 2003 Dodge Neon

1 Answer

How do I replace the headlight assembly MN133516


The 2003 Outlander utilizes replaceable (9007) headlight bulbs. If you're looking to replace the bulb(s);
1. Raise the hood.
2. Remove the plastic cover at the rear of the headlamp assembly by rotating it counterclockwise, and pulling it off. This will allow access to the headlight bulb.
3. Twist the bulb socket counterclockwise in order to remove it from the headlamp assembly. Pull the old bulb out of the socket, and use a clean cloth to install the replacement bulb. Do not touch the glass of the new bulb.
4. Place the socket back into the assembly, and twist it clockwise. Reattach the plastic cover, and close the hood.
Are you needing DIY instructions for replacing the entire headlamp assembly? Left (driver) or Right (passenger)?

Jan 18, 2013 | 2003 Mitsubishi Outlander

1 Answer

My driver side headlamp won't work even with new bulb


check for a fuse probably your car have separated fuses for every light side.

Aug 27, 2012 | 2007 Dodge Caliber SXT Sport Hatchback

1 Answer

2005 dodge stratus. Driver's side headlight. There is NO room to take the bulb out. Is there an easyish way to accomplish this?


On some cars there are pull tabs towards the rear of the headlamp assembly. They may be sticking up thru the radiator support. If so, Pull them sharply straight up, and headlamp assembly will almost fall out.

Aug 17, 2011 | 2002 Dodge Stratus

2 Answers

My brake light and signal light stopped working on my 1998 dodge neon on drivers side back can you help?


Does any lights on the right side work? It sounds like the ground connection to the assembly is loose.

Jan 04, 2011 | 1998 Plymouth Neon

1 Answer

I need to change the headlights


REMOVAL PROCEDURE
  1. Open the hood.
  2. Remove the push-pin retainers that secure the top of the upper fascia and grille assembly to the upper tie bar to allow the upper fascia and grille assembly to flex forward.
  3. Remove the bolt and the push-pin retainer that secures the top of the headlamp assembly to the upper tie bar.

  1. Gently pull the upper fascia and grille assembly forward only far enough to remove the bolt located at the bottom inboard side of the headlamp assembly.
  2. Pull the headlamp assembly straight out to disengage the snap-in retainer at the lower outboard back surface of the assembly. Turn the assembly so that the front inboard corner clears the front fascia.
  3. Pull the headlamp assembly out and away from the vehicle
  4. Disconnect the headlamp electrical connector.
  5. Remove the headlamp assembly from the vehicle.
  6. Remove the headlamp bulb cover from the headlamp assembly.
  7. Remove the headlamp bulb socket from the headlamp assembly.
CAUTION: Refer to Halogen Bulb Caution in Service Precautions.


  1. Remove the headlamp bulb.
  2. Remove the side marker bulb socket from the outer side of the headlamp assembly.
  3. Remove the side marker bulb.
  4. Remove the parking lamp bulb socket from the inner edge of the headlamp assembly.
  5. Remove the parking lamp bulb.
INSTALLATION PROCEDURE

CAUTION: Refer to Halogen Bulb Caution in Service Precautions.


  1. Install the headlamp bulb to the socket.
  2. Install the headlamp bulb socket to the headlamp assembly.
  3. Install the headlamp bulb cover to the headlamp assembly.
  4. Install the side marker bulb to the socket.
  5. Install the side marker bulb socket to the headlamp assembly.
  6. Install the parking lamp bulb to the socket.
  7. Install the parking lamp socket to the headlamp assembly.
  8. Connect the headlamp electrical connector.
  9. Install the headlamp assembly to the vehicle by placing it back into position so that the bolt holes align and the snap-in retainer located at the outboard back surface of the headlamp assembly engages.
  10. Gently pull the upper fascia and grille assembly forward only far enough to install the bolt located at the bottom inboard side of the headlamp assembly.
NOTE: Refer to Fastener Notice in Service Precautions.
  1. Install the bolt and push-pin retainer that secures the top of the headlamp assembly to the upper tie bar.
Tighten the bolts to 6 N.m (53 lb in).


  1. Install the push-pin retainers that secure the top of the upper fascia and grille assembly to the upper tie bar to allow the upper fascia and grille assembly.
  2. Close the hood.
3e4ca4a.gif

Oct 21, 2010 | 2006 Cadillac SRX

1 Answer

2003 Dodge Neon SXT is overheating. electrical issue


is this mechanic a mechanic or a unit changer who works for a main dealer and doesnt know anything about cars,a good mechanic should be able to fix this problem with his eyes shut and one hand tied behind his back---- find one who can and give this strutting peacock in overhauls the boot

Apr 05, 2010 | 2003 Dodge Neon

1 Answer

2003 Mercury Mountaineer


No you don't have to remove battery.
Look on the back side of the headlamp assembly and you will see to black retainer clips.Pull up on them and this releases the headlamp assembly,pull it forward then replace bulb reinstall the assembly and then push the retainer clips back down.

Feb 12, 2009 | 2003 Mercury Mountaineer

1 Answer

How to install 2003 dodge neon headlight assembly.


  1. Disconnect and isolate the battery negative cable.
  2. Remove screws attaching headlamp module to upper crossmember.
  3. Remove headlamp module from vehicle.
  4. Disconnect wire connectors from back of headlamp module.
  5. Remove headlamp module

Jul 02, 2008 | 2003 Dodge Neon

Not finding what you are looking for?
2003 Dodge Neon Logo

Related Topics:

95 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6924 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...