Question about 1995 Mitsubishi Eclipse

1 Answer

Engine swap on 98 eclipse how can I tell if I have conpatable eng

Step son bought engine and had it installed. We cant get any injector pulse or fire at all. Am wondering if they have a compatable engine or just a bad computer. Any #s I can use to verify engine will work in this car. Think its a 95 engine and car is 98. 2,0 non turbo Thanks for any help

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Mitsubishi Master
  • 14,036 Answers

98 model had 33 psi fuel pressure.timing is 2-8 btdc idle speed 650 to 850. 95 model has 43 psi fuel pressure timing is 5 btdc idle speed is 750.check your cam sensor crank sensor . check computer fuse .check injector fuses. your has a distributor on your car you can check timing with a scan tool. as far as i see that not much difference in engines.use the scanner to see if cam and crank sensor working or computer problems.

Posted on Apr 14, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

No spark or injector pulse subaru legacy gtb after engine change?

Call a auto locksmith or have it removed to a dealer i thnk this is a immobilisor problem her the ECU is not communicating with engine and its possible it may need re-programming as the bits are not talking to one and other to put it in a easy to understand way .

Nov 29, 2013 | 1998 Subaru Legacy

1 Answer

P0304 misfire 4

I would replace no 4 injector or at least swap it to another position to see if it is the injector or the wiring to the injector.

Nov 01, 2013 | Cars & Trucks

1 Answer

It seems like one of the cylinders is not firing. Replaced the plugs, wires, and dist. Cap. Swapped fuel injectors around, didn't help. It was still in the same cyl. It has spark, fuel, and compression....

first need to check if fireing or not , your saying it seems to be? Try removing plug wire with engine running and hols a inch or two away and see if you here the engine idles down , if so it's fireing if not may be coil weak, good luck.

Mar 27, 2011 | 1992 Mitsubishi Eclipse

2 Answers

Running on 4 cylenders instead of 8. already replaced brain ,checked injecters for pulse and not all pulse

We check injectors with a needle stethoscope to locate the bad one. After we use injectors check lamp, (it is not costly and you can buy on line). If the light pulse, we replace the injector. If not then is an electrical problem. If you will replace the injectors please, buy original one from Cadillac Dealer, they are expensive. I bought aftermarket for north star engine, they were bad, and I bought again the original one. No more problems with injectors. Mine is a Cadillac Seville SLS. Hope will help.

Sep 08, 2010 | 1991 Cadillac DeVille

1 Answer

Running problems

the pick up coil and module work together to give spark and pulse the injectors pull distributor and rebuild ,which all the 2.8 eng, are like this,,, also check to see if knock sensor is pluged up

Jul 03, 2009 | 1991 Chevrolet Camaro

1 Answer

Runs ok for 10 min then no inj pulse 2.5 engine this ditributor has no wires going to pick up coil is thi normal

I'm thinking the crank angle sensor is going out. I'd bet when you get no injector pulse, you loose fire too. that would tell me your crank angle sensor is gone.

May 27, 2009 | 1989 Jeep Wrangler

1 Answer

Ce lights on code reads #3 cylinder misfire

I assume this 'complete' tune up was plugs, wires and plennum (intake surge tank) gasket?
If so, recommend you first check to see if you are getting an injector pulse to the #3 injector (a noid light is normally used to verify the injector is receiving the 'pulse' from the ECM. The noid light is a very useful tool in finding out if you have problems with your fuel injector. It is cheap (around 10 dollars per piece), easy to use (if the light blinks, your injector is receiving the electrical pulse to open). If after you verify the injector pulse is present, the next step is to determine if the injector or cylinder is the problem. A simple verification process requires swapping the #3 injector with another to see if the misfire moves to the swapped cylinder.(.i.e, move #3 injector to #2 cylinder & the #2 injector to #3 cylinder.).. Then run engine to see if the P0303 changes to P0302. This would VERIFY the injector is in some way defective. If the misfire STAYS at #3 cylinder, you'll want to perform a compression test of all the cylinders. If after this test you find #3 cylinder is more than 10% lower than all the other cylinders, do a 'Leak-Down' test to determine if the low compression is due to leaky valves (intake or exhaust) or whether the piston/rings are the problem. NOTE: If all the cylinders are withing 10% of each other during the compression test, the possible causes are, injector O-ring leak, vacuum leak at the intake manifold at #3 cylinder, or the spark plug not firing under compression.

Mar 15, 2009 | 2000 Hyundai Sonata

1 Answer

2001 jeep Grand Cherokee fuel injectors

check the injectors on that bank for pulses.. a regular 12v text light will do it should flash when cranking... its very possible that the crank sensor or camshaft sensor on the replacement engine is bad and giving you all the problems you have now.. are you using the original injectors? if you have injector pulses then check the coil for pulses the same way.. btw make sure you have 12v to them even before cranking engine could be a bad asd relay..wet plugs on one bank would also indicate a possible leaking injector and basicly draing the fuel starving the oposite bank for fuel.. to verify that the rail must be lifted by removing all 4 bolts make sure the clips hold the injectors firmly and turn the key to run but dont crank it then look for fuel leakin from bottom of injector(s) any drips is a bad injector..

Jan 28, 2009 | 2001 Jeep Grand Cherokee

Not finding what you are looking for?
1995 Mitsubishi Eclipse Logo

214 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts


Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8548 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides