Question about GMC Envoy

1 Answer

Brake lights wont flash and turn signal wont flash

My brake lights wont flash and on the dash one of my turn signals dont flash but all the light be on at night time i have no clue all of the fuses are good

Posted by on

  • Spitfire904 May 14, 2009

    My blinkers do sort of the same thing, when the lights are off and i turn my left blinker on the mileage and radio blink, and when the lights are on; the left turn signal stays on and does not blink and the right does the opposite. Also my wipers only work on high. It sounds like it is the turn signal switch with the cruse control and all that on it.


  • Anonymous Mar 29, 2014

    when I hit a bump and apply my brakes then use my turn signals all my lights flash in back of my truck

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 28 Answers

Turn on the turn signals without turning on any other lights, first left, walk around the car, and see if there is a light that is not functioning, then right, and do the same. If there is a light that is not functioning, replace the bulb.
If all lights work, then its the unit flasher unit itself, and can be baught at a parts store, and is easy enough to replace in the fuse box of most cars.

Posted on Apr 14, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Side lights dont work


Fuse sure didn't play, bulb is unlikely to be all bad. Check the turn signal switch, first find the turn signal switch plug, put the key to ON file, in trying to find a turn signal lamp switch wire (flash to the thread) will this wire with no light ON one side of the turn signal line connected to see if a turn signal light, the light is turn signal switch is broken, or the plug contact undesirable, don't light it is turn signal switch to light ON one side of the light path, in order to determine whether the light bulb is broken can open a small lamp or led brake lights to borrow their wire leads to a turn signal whether turn signal light, so you can determine whether the light bulb not bright side is broken.auto diagnostic tool.

Apr 10, 2013 | 2001 Alfa Romeo 147

1 Answer

Brake/Signal Lights Problem.


Sounds like a ground problem to me. Bulbs are not getting there ground to complete the circuit so they backfed through the other bulbs.

Oct 23, 2012 | 1998 Acura RL 3.5

2 Answers

2007 chevy impala brake light and left turn signal not working


Fast flashing dash signals mean there is a bulb issue-DEFINATELY!

Aug 07, 2012 | 2007 Chevrolet Impala LS Sedan New Cars

1 Answer

On a 2002 dodge ram 1500 truck the brake lights and the turn signals and winshield wipers dont work the only brake light that works is above the cab. and the turn signal flashes on the dash like they are...


I suspect a bad multi function switch located in the left hand side of the steering column. This switch controls your high/low beams/wiper delay/windshield washer/turn signals and hazards.

Dec 31, 2009 | 2001 Dodge Ram 1500 Truck 2WD

1 Answer

Turn signals wont work


change relay turn light indicators

May 17, 2009 | 1992 Pontiac Grand Prix

3 Answers

Brake light problems on a 2000 chevy lumina


Will your Center High-Mount Stop Light (CHMSL) illuminate when you depress the brake pedal, but the lower/outer lights will not?
-- Do you have to hold the signal lever in a certain spot to get the turn signals to flash?
-- Do you have to hold the signal lever in a certain spot to get the lower/outer brake lights to illuminate?
-- Will the signals work in one direction, but not the other?
If you answered yes to any of the preceeding questions, your turn signal switch is likely malfunctioning.

**One more question before we continue: Is the turn signal lever not "cancelling" (returning to the "off" position) after you make a turn? If this is the case, you have a broken "cancelling spring."


Before you begin disassembly of your steering column, verify the turn signal flasher is not malfunctioning. If your brake lights work fine, but not the signals (either direction,) then it's likely the flasher is burnt out. The flasher itself is located underneath the dash near where the steering column passes through the firewall

Mar 19, 2009 | 2000 Chevrolet Lumina

1 Answer

Tail lights shut off


sounds like a bad turn signal switch

Feb 21, 2009 | 1998 Mazda 626

2 Answers

Turn signal wont work 1999 cadillac eldorado E.T.C


start with a fuse, then go on to a turn signal relay. turn the level left or right on the steering column with the inginition switch on, if the light in the dash lights up but won't flash, it is the turn signal relay.

Aug 10, 2008 | 1999 Cadillac Eldorado

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

534 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

80339 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...