Question about 2005 Chevrolet Colorado
It's an '05 Colorado Z-71 2wd 4 cyl (2.8L) with manual trans. When I'm in neutral or trying to shift it drops rpms and starts shaking voilently. I originally thought I got some poor gas with maybe some water. So I changed a fuel filter, used some sea-foam and it didn't work. I took it to an auto parts store and used their diagnostic machine and it gave me 3 codes. #1 P0017: crank/cam correlation #2 P0014: exhaust cam post time adv #3 P0101: mass air circuit. I tried cleaning out the mass air sensor between the air filter and intake and I think it may even be worse now. Can anyone help?!?!
It is a sign of dirty Throttle Body. Clean Throttle Body with Throttle Body Cleaner and fix the problem, lot of videos are available on YouTube how to clean Throttle Body. See the attached videos, all procedure are working fine and you can choose any procedure according to your convenience: https://www.youtube.com/watch?v=mIYpZrL1DKA https://www.youtube.com/watch?v=XrcaDh4xDLs https://www.youtube.com/watch?v=41yFXjibtLY https://www.youtube.com/watch?v=mTiAYGHEeHs https://www.youtube.com/watch?v=df9YYULxQE8
Posted on Apr 17, 2017
Problem most likely the cam position sensor or solenoid for the cam
Posted on Apr 17, 2017
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
1- check there is spark come from spark wires
2- check the fire timing by looking for every wire in the right place
3- check there is injector signl
4- check for any vacuom leak
5- try to clean the MAF by brake and parts cleaner
6- try to reset all the code and see what will come after that
Posted on Mar 14, 2009
SOURCE: 06 Colorado wont start at times
there is a faulty switch in the steering wheel column. My truck did the same thing. Next time check to see if the security light flashes next time it doesn't start. the time delay is more like 10 min.
Posted on Dec 31, 2009
SOURCE: Im getting a P0017, P0014,
po300 is a general missfire code if i rember right. there is more than likely an install procedure that will require you to clear all cods ( even if there is no code preasent ) before you install the new part or failure of those parts can happen
Posted on May 13, 2011
Tips for a great answer:
Oct 04, 2014 | 2006 Chevrolet Colorado
May 03, 2010 | 2005 Chevrolet Colorado
Jul 05, 2009 | 2005 Chevrolet Colorado
Apr 07, 2009 | 2007 Chevrolet Colorado (Extended Cab) New...
385 people viewed this question
Usually answered in minutes!