Question about 2006 Hyundai Sonata

1 Answer

Headlight need adjustment

How to adjust the headlight in a 2006 Sonata? I've replaced the bulb like the handbook told me to do. The light is shining on the ground. Can someone help me, thanks

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 26 Answers

There is an adjustment screw on the back of the headlamp assembly. check the bulb and make that is installed straight with the metal tab lined up inside the hole.

Posted on Apr 14, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you remove the headlight assembly on 1995 ford f250?



  • 1.
    Remove the two upper screws from the headlight housing, using a Phillips screwdriver.
  • .
    Locate the two lower retaining nuts inside the engine compartment at the bottom of the headlight housing. Remove the nuts using a ratchet, extension and socket.
  • Separate the turn signal and marker light assembly from the front grill. Rotate the bulb holders counterclockwise and pull them out of the assembly. Set the assembly aside.
  • Unplug the headlight bulb connector from the bulb. Rotate the retaining ring counterclockwise one-eighth turn and remove it from the housing. Pull the headlight bulb straight back and out of the housing. Do not rotate the bulb during disassembly.
  • Lift up on the headlight housing retaining clips to unsnap them from the headlight housing vertical adjuster studs.
  • Locate the horizontal adjuster at the outer bottom corner of the headlight assembly inside the engine compartment. Loosen the horizontal adjuster until it is free of the adjuster nut.
  • Remove the headlight housing from the vehicle.
Installation
  • Install the headlight housing in the front grill.
  • Engage the horizontal adjuster screw with the adjuster nut and screw it partially in.
  • Snap the headlight housing clips on the vertical headlight adjuster studs.
  • Insert the headlight bulb into the headlight housing, flat side up. Slightly rotate the headlight bulb to engage the grooves in the light with the alignment tabs in the back of the housing. Install the retaining ring on the bulb. Plug in the headlight bulb connector.
  • Install the bulb holders in the turn signal and marker light assembly. Install the assembly in the grill. Install the two upper screws, using a Phillips screwdriver. Install the two lower retaining nuts, using a ratchet, extension and socket.
Headlight Aiming
  • Pull the vehicle to within a few inches of a blank wall, on a flat surface. Apply two strips of tape to the wall vertically to mark the centers of the headlights. Apply a strip of tape to the wall horizontally to mark the center of the headlight height. Back the vehicle up 25 feet in a straight line.
  • Turn the headlight low beams to the "On" position.
  • Adjust the vertical headlight adjusters until the high-intensity zone of the light pattern is two inches below the horizontal mark on the wall.
  • Adjust the horizontal headlight adjusters until the high-intensity zone of the light pattern is two inches to the right of the vertical headlight marks on the wall.

Nov 08, 2012 | Cars & Trucks

2 Answers

Headlight aim is too low / how to adjust


First of all is the headlight on your car free of oxidation.Lens cover should be clear not Foggy,Yellow.or Hazy.Most common problem when visibility is poor it;s because over time the headlights tends to oxidized.Hope this helps.But if your light is mis-alligned check with haynes manual for proper adjustment.

Nov 06, 2012 | 1997 Dodge Neon

1 Answer

How do you change the headlight


On a Newer Vehicle you'll replace the Headlight Bulb
Open the engine compartment hood.

Locate the back of the headlight to determine the lamp and bulb type.
Decide which bulb you need to replace.
Purchase the correct bulb for your headlamp.
Behind the headlight the lamp the socket is removable.
Remove Socket then replace lamp (bulb).
Carefully re-install the socket


On Older vehicles:


Remove the screws that connect the headlamp frame to the
bracket holding the headlamp. Make certain you turn only
the screws that hold the lamp frame, not the adjusting screws.
Disconnect the electrical connector in the back of the lamp
by pulling the socket away from the headlamp with your hand.
Remove the headlight from the bracelet area and discard it.
Replace with the new headlight, making sure that it is positioned
right side up.
Plug the wire socket into the new headlight, which holding the
headlight securely.
Replace the headlight into the frame.
Place the frame onto the headlight bracket.
Reattach the screws to hold the frame and bracket in place.
Do not adjust the setting screws for the direction the headlight
shines.


At night partk in front of a wall and shine your lights on the wall
so see if the headlight shifted during installation.

Jul 14, 2012 | Cars & Trucks

1 Answer

After replacing the drivers side headlight assembly on a 2006 buick Lacrosse, the high beam hits the road very low. Is there an adjustment I've missed?


If they are adjustable, the adjuster screw would be visible just above or below the lens. Are you sure the bulb is seated in the socket? and seated into the light assembly squarely?

Aug 30, 2011 | 2006 Buick LaCrosse

1 Answer

I'm having a problem removing the headlight assembly from my 2004 chrysler crossfire, i've removed the 2 screws from the top and removed 1 from below through the wheel well, are there two screws...


Last I checked Chrysler had changed it's headlight mounting from external screws to just the two adjusting screws. Looking down from the top, you should be able to see two Torx head screws that are used to adjust the headlight assembly. The remove teh head light assembly you remove those and the assembly should come right out. Both of these screws or adjusters will be 6 to 8 inches long. I hope your not removing this to change the headlight it self. Chrysler has been using the insert bulbs for several generations and to replace the bulb you only have to unlock the collar on the back of the light assembly and pull and then replace the bulb.

May 14, 2011 | 2004 Chrysler Crossfire

1 Answer

The headlight beam on my left side shines too low. My mechanic replaced it and can't figure out how to adjust it up to the same level it was before he replaced it. If I shine the lights on a wall, the...


First check bulb is inserted and clipped in correctly most are awkward.did the inner part get disturbed etc.i dont know if ur model has auto adjust headlights but even if it does and the motors failed they can still be done manually.most have two nut shaped adjusters or take hex type key .i think u should check the stuff i started with.they dont just go out of adjustment without a cause

Apr 17, 2017 | 2007 Subaru Impreza WRX Sport Wagon

1 Answer

How do I adjust the headlight beams on my 1991 Dodge Spirit?


I believe these have adjustment screws between the headlight bulb and the headlight bezzle on the top and bottom center of the headlight.

Crouch down so the bulb would be shining right in your eyes if it were on. You should see the adjustment screws I'm talking about in there.

You should be able to shine the lights on a garage door or wall and move the screws in or out to get the desired beam height you're looking for.

Mar 30, 2010 | 1991 Dodge Spirit

5 Answers

How do i adjust my headlingt on a 2001 suzuki xl7


The adjustment screws/nuts should be located either on the top of the headlamp assembly, behind the headlamp assembly, or near the frame rail by the radiator support.

You will have vertical adjustment screws for each independent beam (separate highs and separate lows, but will be same screw if highs and lows are the same bulb). You may also have additional horizontal adjustment screws as well

Park your car on a level ground 30 feet from a wall and measure the height from the ground to the bulb and mark on a wall (do this for highs beams and low beams if the bulbs are separate, if highs and lows are the same bulb, only do it for the lows)

For Low Beams: If the headlights read VOR, then aim the brightest part or cutoff part just below the mark on the wall. If it says VOL or nothing, aim them 2 inches below the mark on the wall.

For High Beams (if separate from low beams): Aim the headlight directly at the line you marked on the wall.

Nov 14, 2009 | 2001 Suzuki Xl 7

1 Answer

Headlight adjustment for 2006 Infiniti M35


The adjustment screws/nuts should be located either on the top of the headlamp assembly, behind the headlamp assembly, or near the frame rail by the radiator support.

You will have vertical adjustment screws for each independent beam (separate highs and separate lows, but will be same screw if highs and lows are the same bulb). You may also have additional horizontal adjustment screws as well

Park your car on a level ground 30 feet from a wall and measure the height from the ground to the bulb and mark on a wall (do this for highs beams and low beams if the bulbs are separate, if highs and lows are the same bulb, only do it for the lows)

For Low Beams: If the headlights read VOR, then aim the brightest part or cutoff part just below the mark on the wall. If it says VOL or nothing, aim them 2 inches below the mark on the wall.

For High Beams (if separate from low beams): Aim the headlight directly at the line you marked on the wall.

Feb 04, 2009 | 2006 Infiniti M35

2 Answers

Changed passenger side headlight bulb, now unable to adjust or align head lights


Changing the bulb should not have affected the housing adjustments.

The bulb is just inserted into the headlight housing. The adjustments on the headlight housing is what adjusts the alignment of the headlights.

Did you maybe not get the bulb not seated correctly in the socket? Or didn't get the socket not seated correctly into the housing?

Aug 12, 2008 | Ford Focus Cars & Trucks

Not finding what you are looking for?
2006 Hyundai Sonata Logo

678 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...