Question about 2001 Jeep Grand Cherokee

1 Answer

My left turn signal in my 2001 Jeep Grand Cherokee will sometimes just stop working and I dont know how to fix it

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

  • Expert
  • 50 Answers

If it just stops flashing, the problem is usually the flasher module. I don't know any way to test it except to get one that you know is good and try it. Here's how to get to it:
Remove the trim panel just below the instrument cluster. It just snaps into place. Remove the 2 downward facing screws that were hidden under that trim panel (if they're on yours). They hold the knee blocker trim panel on. Open the drivers door as far as you can and take that screw out in the side of the knee blocker trim. Under the dash, all the way to the left, is a little black cover. Pull it off. There should be 2 or 3 screws across the bottom there. Take them out. Pull the knee blocker trim panel towards you, starting at the top. If all the screws are removed it should unsnap with no problem. Towards the left you'll see a box with 2 big connectors held in place by little bolts and a bunch of relays and stuff. The flasher plugs in there like a big relay. It's best to have the new one before you start so you know which one it is. I hope this helps. Good luck,

Posted on Apr 14, 2009

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

emissionwiz
  • 75822 Answers

SOURCE: Turn signals not working on 2001 Jeep Grand Cherokee

replace the turns signals flasher unit.

Posted on Mar 02, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2001 Jeep Grand Cherokee turn signals & heat/ac dont work


i am a mechanic. a customer call me that own a 2001 grand cherokee 4.0 liter inline six cylinder. right and left turn signals did not work, hvac blower and a/c light all not working. thank God after getting the wiring diagram for the #20 10amp fuse i found that the park/neutral switch(located on the driver's side of the transmission) wire harness was damaged. after some black elec tape the problem was solved.
God is awesome!

Feb 05, 2013 | 2004 Jeep Grand Cherokee

1 Answer

2001 Jeep Grand Cherokee Limited left turn signal goes off and on?


then blinker control will stick at times it needs replacing. its small round and most of the time its shiny

Oct 24, 2012 | 2001 Jeep Grand Cherokee

1 Answer

How to fix my right brake light and fast moving turn signal on my 2000 Jeep Grand Cherokee?


The most likely problem is two burned out light bulbs. A burned out tail/stop lamp on the right side and a burned out brake lamp on the left. If you have already replaced the bulbs, then yes, the circuit boards are the next most likely cause of the problem.

Apr 07, 2012 | 2000 Jeep Grand Cherokee

1 Answer

My left turn signal wont work in my 2001 jeep grand cherokee


IF LEFT TURN SIGNAL BULB GOOD.TURN SIGNAL SWITCH COULD BE FAULTY.

Dec 06, 2010 | 2001 Jeep Grand Cherokee

1 Answer

The driverside signals dont work and i think it is the flasher and anyone tell me where it is located on a 2001 jeep grand cherokee larado????


One of your left side parking lights is burned out. Good luck, Ned. The flasher works on resistance and the bulbs provide that redistance.

Oct 31, 2009 | 2001 Jeep Grand Cherokee

2 Answers

Turn signals hazards flasher don't work jeep cherokee replaced combination flasher relay, turn signal switch and still no signals


I NEED TO LOCATE THE SWITCH WHERE IS IT ?
MY INDICATORS NOR HAZARD LIGHTS ARE WORKING I DONT KNOW WHAT IS WRONG WITH IT CHANGED BULBS BUT NOTHIGN THEY ALL WENT OUT AT THE SAME TIME
SO THERE MUST BE A RELAY SWITCH SOMEWHER BUT DONT KNOW WHERE ?
THANKS FOR HELPING

Sep 27, 2009 | 1999 Jeep Cherokee

1 Answer

2001 Jeep Grand Cherokee- Turn Signal


Does left / right turn signal work. Either/Or. Probably the switch at the bottom of the indicator "stalk". Big $$$

Feb 27, 2009 | 2001 Jeep Grand Cherokee

3 Answers

03 grand cherokee


go to the next block and then make 3 rights and proceed down your intended street with no violations.

Jun 19, 2008 | 2003 Jeep Grand Cherokee

Not finding what you are looking for?
2001 Jeep Grand Cherokee Logo

203 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...