- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
it wont go away because their is a mechanical problem and or problem with oil change [ not enough oil wrong filter etc ] will need to have vehicle scanned for the fault code to determine the problem most auto stores offer this service for free
It has to be reset each time you have your oil changed.
To reset it press the status control button on message center to access the system check function. Then press reset to reset oil % the press and hold reset control to set it to 100%
Turn on the ignition switch without starting the vehicle and mash the accelerator to the floor 3 times slowly and this should reset the change oil sensor.
To reset the Change Oil Light:
Open driver's door and open fuse access panel
Turn ignition key to on (don't crank the starter)
Push reset button located in fuse panel
When Change Oil Light starts to flash
Press and hold reset button until it beeps and light goes off
Repace panel
×