Question about 2003 Ford Mustang

2 Answers

How do I remove the panel covering seatbelt mechanics to repair seatbelt on 2003 ford mustang?

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Https://www-odi.nhtsa.dot.gov/

FIle a compaint if you have a faulty seatbelt

Posted on Feb 03, 2010

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 145 Answers

First disconnect the battery, that seat belt unit can blow up, it has an explosive charge to tighten the belt in an accident, and make sure you are static free.

most of these are held in place with just plastic clips and just takes some pushing and pulling. it should just be the bolt at the top of the belt harness that you will need tools for.

Posted on May 01, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i remove left sail panel on 1999 ford mustang


Remove the upper interior panel pieces; unscrew the coat hook, remove seatbelt from door jam pillar, remove plastic cover (snaps into place). After this you will see the nuts needed to remove the sail panels

May 27, 2012 | Ford Mustang Cars & Trucks

2 Answers

Need a interior fuse panel diagram for a 2003 Ford mustang.


I suggest look in the owners manual; check and download for free in this links:
- https://www.fleet.ford.com/maintenance/owners_manuals/default.asp
- http://www.ownersmanualsource.com/ford/ford-mustang-owners-manuals/ (end page)

Hope helps (remember to rate this answer).

Mar 18, 2011 | 2003 Ford Mustang

1 Answer

2003 ford expedition rear ac makes noise when engine running and how to remove the cover of the same


What kind of noise is it? If it is a "clicking" noise, a common problem on the Expy, you will need to replace the Blend Door Actuator. This is a small unit on the passenger side, rear. When you take the panel off, turn the key on to make the noise so you can locate it (there are actually 2 units) they have plastic gears that strip out, making the clicking noise. To remove the panel to access, you'll have to carefully pop the panel off and remove a couple of bolts around the seatbelt.

Jan 28, 2011 | 2000 Ford Expedition

1 Answer

The seatbelt light and bell stay on even if you buckle the seatbelt. is their a way to bypass or jumper out this on a 2000 ford mustang?


seems like the connection is disconnected on the buttom of the seat that goes to the seatbelt click,make sure its connected.if that is connected then change the thing that the seatbelt goes in on the seat that clicks in cause could be jamed common problem and wont let the light or noise go of .if my info was of any help to you please leave a comment ,thankyou.

Sep 02, 2009 | 2000 Ford Mustang

1 Answer

Seatbelt on driverside next to floor is pulled out wont retract please help


Seat belts are not repairable. A replacement must be done (new or used)

May 29, 2009 | 1996 Ford Mustang

1 Answer

Passenger side seat belt won't pull out


It could have twisted on recoil and is now stuck. You'd have to remove the interior panel to view that.

On the really bad side, the seat belt pretensioner could have failed or fired and locked the belt in place. If that's the case, I'd have a mechanic replace it since you can trigger an air bag deployment replacing it yourself.

May 03, 2009 | 2002 Ford Mustang

1 Answer

I have movement in the rear wheels on a 2003 Ford Mustang.Do I need to change the wheel bearings? How do I remve the hub?


Sounds as though your bearing could be bad, does your Differential have a cover on the back ?If so you'll have to remove it and remove the retainer rings (1) on each side of the inner axel .Then you should be able to remove the axels,but still may have to remove the Brake back cover also .Notice how much gear lube is left in the housing when you remove the cover . Don't forget to also replace the dust seals as well .

May 02, 2009 | 2003 Ford Mustang

1 Answer

The Fasten Seatbelt Light on my 2002 Mustang will not shut off


you need to be sitting in the drivers seat, not the passenger.

Mar 17, 2009 | 2002 Ford Mustang

1 Answer

How to increase the seatbelt pre-tension...2004 f350.


REMOVE THE COVER AND WD-4O THE MECHANISM.THE TENSION IS SET BY A MANUFACTURING PROCESS THAT YOU CANT INCREASE.ALSO IT COULD BE DEADLY TRYING TO DUE TO THE PRESET ACCIDENT LOCKING FEATURE,TRY WD-40 /IF IT WORKS GREAT IF NOT TRY A SALVAGE YARD/NEW PARTS STORE.

Jan 16, 2009 | 2005 Ford F 350 Super Duty

1 Answer

Remove passenger mirror on 1996 mustang covertable.


I have a 2003 Mustang, but assuming it is the same then check the following:

Do you have a speaker (tweater) in the door or just a plastic triangular cover (trim piece) on the inside of the door? If yes, open the door. The trim piece clips in place with plastic lugs. Lifting from the back edge the piece should rotate out either exposing the tweeter or the 3 bolts holding the mirror in place. If the tweeter is there, you will need to remove the speaker first. The bolts for the mirror are attached to plastic, so do not overtighter the nuts when reinstalling or you will have to buy a second mirror. Hope this helps.

If you do not have the triangular piece (i.e. door panel is one piece), the Chilton's manual says the door trim panel must be removed first.

Jan 15, 2009 | 2003 Ford Mustang

Not finding what you are looking for?
2003 Ford Mustang Logo

279 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...