Question about Ford F-250

2 Answers

The dash lights on my 1979 ford F250 do not work. I have replaced the flex circuit, lights and light switch. All of the other lights, turn signals, brake light etc work. Any ideas?

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 51 Answers

I REPLACED THE HAZARD/TURN SIGNAL RELAY AT FIRST AND IT WENT AWAY FOR A WHILE BUT IT CAME BACK WITH THE SAME PROBLEM. WHAT IT TURNED OUT TO BE WAS THE WHOLE TURN SIGNAL SWITCH ON THE STEERING COLUMN.

Posted on Nov 15, 2012

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

How did you fix the problem I have the same condition

Posted on Dec 08, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1990 Ford f250 brake lights and turn signals won't work - checked all fuses, flasher and bulbs and all are good, what could problem be??


Well the brake light and turn signal circuits are on two different fuses, but they both go thru the turn signal switch.
So I would start by checking for power in and out of the turn signal switch for each circuit.

Apr 07, 2013 | 1990 Ford F250

1 Answer

03 ford f250 7.3 power stroke keeps blowing turn signal fuse.


Electrical issues are always a bit difficult to diagnose. Since I have not heard the wiring harness to be an issue on these, I would first look into if there was some add on causing an issue. Did you or someone add a trailer harness? Some type of additional lighting (like an LED bar)? Even possible a radio or under dash work? If not then do a once over and look at where the wiring comes through the firewall, or through the body to feed the turn signals. You just have to systematically follow the wiring from the lights back to the switch until you find the culprit. Let me know what you find and I can try to assist further.

Jan 03, 2013 | 2003 Ford F250

1 Answer

1991 Ford F250 Brake and signal indicators do not work


You're in the right ball park.
You should have voltage from the brake switch into the turn signal switch and then out to the lights.
Usually a switch is either closed or not, so 23 ohms would be a problem. Hitting that connection with 12 volts could sink it.

Aug 06, 2012 | 1991 Ford F250

1 Answer

1995 Ford f250 brake lights don't work ad neither do the hazard flashers. I replaced the flasher node and the turn signals began to work but still no brake lights.


You may have a bad signal switch..Your brake lights run through the signal switch..Try hitting the brakes and move the switch around and see if your brake lights come on intermittently..

Sep 22, 2011 | 1995 Ford F250

1 Answer

2001 F-250 SUPER DUTY TAIL LIGHTS WIRING DIAGRAM


THE TAIL/MARKER LIGHTS, GO FROM THE HEADLIGHT SWITCH TO THE REAR FOR THE TAIL LIGHTS & TO THE FRONT FOR PARKING OR RUNNING LIGHTS. ALL THOSE LIGHTS ARE ON THE SAME CIRCUIT, { BROWN WIRE } THE BRAKE & TURN SIGNAL WIRES GO FROM THE STOP LIGHT SWITCH & FROM THE TURN SIGNAL/HAZARD SWITCH. NO RELAY IN THE TAIL/PARK CIRCUIT. CHECK THE FUSES WITH A GOOD FUSE TESTER.

Jan 15, 2011 | 2001 Ford F250 Super Duty Super Cab

1 Answer

I have a 1993 Ford F250 and the headlights only have failled. They were going out intermitantly but they would come back on when I would mess with where the turn signal meets the steering column. Is there...


i had this problem also what it is .....the light switch in dash top right it is 14 or15 dollars at local parts store. to remove top half behind steering wheel. pop out trim molding at center then unscrew dash cover unplg the fuel tank switch and the water alarm if u have one ..........light switch unscrews then unplug .

Dec 08, 2010 | 1993 Ford F250

1 Answer

1979 Ford Bronco 400M engine. Tail lights work but brake lights and turn signal lights do not work. The right signal light on the dashboard stays lit all the time. Is it probably my turn signal switch, a...


The brake light and the turn signal are the same bulb. Most of the time if the bulb on the dash stays on it is because a bulb is blown and thats the way it tells you.

Oct 29, 2009 | 1984 Ford Bronco

1 Answer

My 1999 f250 brake lights do not work, but the turn signals do, and the tail lights do too, I put in a new brake light switch but there does not seem to be any power coming out of the switch


take the hazard button and tug and wiggle it real hard when pushing the brake pedal, if they start flickering, you will need a turn signal switch replaced.

Sep 23, 2009 | 1999 Ford F250 Regular Cab

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

548 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...