Question about 2003 Hummer H2

2 Answers

Air pressure sensor

Air pressure light on in dash, checked tire pressure and light still on. Pushed the reset on the odometer, the words on odometer went off. The icon for the tire pressure is still on. Also, just wondering what exactly is the sensor and where is it located, the idea of this blows my mind as I understand that is like a wireless signal of sorts.

Posted by on


2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.


    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

  • Expert
  • 117 Answers

It sounds ike one of your wheel sensors is faulty. These are part of the valve on the wheel rim where you add air to inflate. The only way to replace this is to remove the tyre. Your best bet is to take it back to your local main dealer as they are fully equipped to deal with such issues.

Posted on Apr 13, 2009

  • Jason Oct 25, 2015

    I disconnected the battery for about 5 minutes. Then I touched the two battery cables together a few times. It seems to have reset the computer and low tire light display and icon are gone


  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I disconnected the battery for about five minutes. Then I touched the two battery cables together a few times. Seems to have reset the computer. Low tire display and icon are gone.

Posted on Oct 25, 2015


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How do I reset my tire pressure light when tires are fine

My Lesabre has buttons on the left side of the dash. The one called Gage Info has a number of things like oil pressure check tire pressure heat Battery. Push this button till it says check tire pressure To reset your light push the reset button and hold for fifteen or twenty second and the light on the dash should go out and it will show tire pressure ok on the gage. Before you reset check all four tires for air as one tire could be down 8 or 10 lbs and the light will come back on. they all have to be the same pressure.
When you change your oil you should reset the oil section as well and hold reset the same as above. The oil section tells you how much oil you use over an amount of time.

Apr 01, 2016 | 2004 Buick LeSabre

2 Answers

I have a 04 tahoe and the check tire pressure light is on i put air in tires but light is still on what seems to be the problem

perhaps the spare also needs checked , all tires have to be real close to the same pressure

Sep 16, 2015 | Cars & Trucks

1 Answer

Why cant I get low tire pressure light to stay off? have changed sensors, tires, and put air in and let it out. Nothing works!

Hello, some vehicles require to be manually reset. Some reset buttons are in the fuse box and some under dash.

Feb 06, 2015 | Cars & Trucks

2 Answers

I have pressed the re-set button for tire pressure but its still on.what to do next

Unplug battery for couple hours to let computer reset while battery is unplugged turn key on to drain all power in system after few hours you should be good. Also make sure all tires got same amount of pressure.

Apr 07, 2014 | 2000 Buick LeSabre

3 Answers

My sons' 08 jetta is in Chicago. (very cold there) His low tire pressure light on the dashboard lit up. what should he do?

Hello: Check tire pressure, Proper pressure should be on a label on the driver door and door frame. If tires are low, air them up to spec's. If only one tire is low you should check it for a puncture.

Jan 23, 2011 | 1997 Volkswagen Jetta

1 Answer

My 2006 tacoma the low air pressure light is on I put air in all the tires and pressed the odometer button to try and reset the computer but it did not work.

the odometer button has nothing to do with the tires. After you set the tires to the correct pressure, it should go off by itself., sometimes it takes a while, few miles. Be sure to check the spare. some trucks have a sensor there, you will be able to look at it and tell if it has a sensor by the construction of the valve stem. If all tires are good, and the light does not go off, the dealer will need to check it out. You say you put air in, but not what pressure. The pressure spec is on the drivers door jamb. I would go 2 psi more than the sticker.

Dec 06, 2010 | 2006 Toyota Tacoma

2 Answers

The words tire reset keep on popping up on my dashboard. What does that mean, and how do I get rid of it? 2004 Ford Freestar.

With and without "Mesage Center" respectively (pretty sure)

With the engine on...

Push "Setup" button, until your driver display says something like "Press Reset for system check".

Then push Reset. The system check will start, rotating through a series of checks.

About the fifth or sixth check will be the tire pressure. The system will sound the tone (same one that starts w/the light) and It'll say something like "Check Tires Pressure" on that moment press and hold for 3 or 4 seconds Reset. When you release the Reset button It'll show "Hold Reset if tires are OK". While that's up, hold the Reset button. After 3 or 4 seconds, the tire warning light will blink 2 or 3 times and then will stop .You need to be ready for it, because you don't get very long to release.

How to reset the low tire pressure warning if the vehicle does not have the "Message Center"

Turn the ignition to the ON position,
depress and Trip/odometer button (located in the instrument cluster) until "TIRE RESET" or "CHECK TIRE AND RESET" is displayed in the odometer display window.
Once "TIRE RESET" or "CHECK TIRE AND RESET" is displayed, press and hold the button for three seconds.
The low tire warning indicator light will flash three times as the low tire warning system begins to initialize.

This information is in the Owners Manual

Hope it helps

Nov 04, 2010 | 2004 Ford Freestar

1 Answer

How do i reset the flat tire light on the dash after i changed the tire?

After you have changed a tire and adjusted your tire pressures you will need to initial the tire pressure monitoring. If your vehicle does not have I-drive then with the iginition in the on position on the left steering wheel stalk, move the rocker switch up and cycle through until you see an icon in the cluster that says initailize. push the button on the end of the stalk inwards toward the steering wheel and hold until you see the icon in the cluster show a check mark. When it shows a check mark your finished.

May 21, 2010 | 2006 BMW 3 Series

Not finding what you are looking for?
2003 Hummer H2 Logo

327 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hummer Experts


Level 3 Expert

76691 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8531 Answers

Are you a Hummer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides