Question about 1987 Toyota Pickup

1 Answer

Which wire do i hook up to an after market tach on a toyota 22-re

1987 toyota truck w/22re engine, one wire to hook up tach to distributor wires, which do I tap into? thanks a ton!

Posted by on

  • 1 more comment 
  • Anonymous Apr 14, 2009

    does this mean to tap into spark plug wire to #1 cylinder? Sorry but feeling kind of dumb/numb today.

  • baillie_clan Apr 14, 2009

    Is that the red or white wire from distributor to coil? Or another wire at the coil? Thanks very much!

  • baillie_clan Apr 15, 2009

    Thank you,appreciate your help on this.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,077 Answers

I'm sure it's the number one cylinder.

Posted on Apr 13, 2009

  • Devon Sacco
    Devon Sacco Apr 14, 2009

    Sorry my bad, it's not going to be those wires.

    It the wires coming out on top of the coil. My

    wiring diagrams says it the black wire.

    There should be a green three prong connector that hooks up to the coil. The black wire going to that connector should be the one.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

94 Toyota pickup 2.4 auto does it have a ground wire from distributor


Stephen, I believe there is just a 2 wire plug, no seperate ground wire. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
No start Due to Pickup Coil Failure Inside Distributor Toyota Camry Common...
How to Remove and Install Toyota 20R 22R 22RE Distributor
94 Toyota pickup 2 4 repair manual Google Search

Jun 21, 2016 | Toyota Cars & Trucks

1 Answer

On a 1998 chevy cavalier what color wire do i hook the green off my tach to


The green wire from the tach goes to the negative side of the coil or if its an HEI distributor it will connect to the left of the hot wire going. to the distributor.

Apr 01, 2014 | 1998 Chevrolet Cavalier

1 Answer

1991 toyota pickup is running rough


If not wrong this engines also need a valve lash adjustment time to time even do this littl eng. 22RE runs rough normally, try it wont hurt.

Jul 23, 2012 | 1991 Toyota Pickup

1 Answer

I have a 1995 Ford 250 pick up. Engine 460 V8. I am trying to find out how to hook up the wire to the electronic system for an RPM gauge. The older cars use to hook up to the coil, but the F250 has...


According to info found online, the wiring for a 1995 F series tach gauge is as follows;

Tach..........Tan/Yellow wire...........at coil connection.

Your truck does have a coil that feeds the distributor, correct?

Jan 18, 2011 | Ford F-250 Cars & Trucks

1 Answer

What do the symbols P and S stand for on terminals of the tachometer? 1978Chev.305 gas engine with distributor and coil.......jn my boat


tach hook up for chevy with hei distribitor is 1)white wire ; 12volt source 2)red wire -12 volt ignition switch (+) 3)black wire -battery ground (-) green wire ; to tach terminal on dist. / if it not hei with points just put green wire to neg. (-) side of coil

Nov 05, 2010 | Chevrolet Caprice Cars & Trucks

2 Answers

Ignition coil


The tach wire tells the computer information it needs to have engine control.Please rate if this was helpful,thank you.

Jul 19, 2010 | 1990 Chevrolet C1500

1 Answer

Help! I cant find the green wire under my hood to hook up my tach? I dont see the coil,just the distributor. Can someone tell me where to attach my green wire from the tach? Its a 1986 chev.p/u 350....


the coil is in the distributor.Just look on the end where the wires go into the distributor and you will see where it says tach.,batt.,There is a terminal where you can hook up your tach. wire.Hope this helps.Good luck.

Apr 20, 2010 | 1985 Chevrolet S-10

2 Answers

How to hook up a after market tach to a 1997 prizm w/a1.6 liter


go to autometer website and look at there diagrams

Feb 05, 2010 | 1997 Geo Prizm

1 Answer

Where is the wire that controls tach in 1987 Camaro?


If you have the one I'm thinking of, it is just to the left of the main power terminal on the cap (usually marked tach)

Oct 29, 2009 | 1987 Chevrolet Camaro

1 Answer

87 4Runner 22RE problem


Replace the number one injector; it is sticking open.

Oct 07, 2008 | 1985 Toyota Pickup

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

419 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8202 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...