Question about 1995 Pontiac Grand Am

1 Answer

I have changed the sensor the stat and the fan and my 95 grand am quad 4 still says collant low but no water in oil and i am not sure what next step is anyone know what should be next

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Pontiac Master
  • 76,164 Answers

These sensors are the subject of many technical service bulletins (TSB's), they give false coolant low readings, there is a new sensor avail that they say works better and is less prone to this false trouble signal of low coolant, contact your local dealer.

Posted on Apr 13, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Location of sending unit for water temp & oil pressure 95 geo metro 3 cylinder


g10
there are 3 of them. (no reason giving for easter egg hunt)
the fan thermo is next tot the below.
water temp is on the or below the thermostat housing.
water temp for guage or EFI water temp, there are 3.
the 3rd sensor is in the throttle body.
(whats a throttle body, that thing that sucks air as you step on the throttle)
the one with 1 wire is guage, the one with 2 wires is EFI.

the oil pressure is on the side of the engine.
12pm above the oil filter, (see 1 wire sensor there?)

May 19, 2015 | 1995 Geo Metro

1 Answer

I think i need to replace the crankshaft sensor on my 1992 grand am but i cant find it an im not sure if it'll fix it,it started off idling really odd like it was going to d I e first only in park


it could be misfiring, where did you get those codes? but the Crankshaft Position Sensor should be somewhere between the intake manifold and the firewall. The Quad Drive is electronics related, supposedly the most common cause of this code is the EGR valve (exhaust gas recirculation) and should be near the cylinder heads and are also said to be easy to replace. Quad Driver A module monitors the low speed fan, Evap canister purge solonoid, the HIGH TEMP light, and TCC apply. Quad Driver B module covers the shift solonoids and EGR valve.

Oct 26, 2012 | 1992 Pontiac Grand Am

1 Answer

2005 grand Prix oil pressure light an dinging comes on


1. Check your oil level. If oil level is not ok, correct oil level and find out why oil level was low and correct the problem. (Leaks, bad PCV, Burning oil due to severe engine wear, nobody has bothered to check it for the last 3000 miles, WAY overdue for an oil change, etc.) If oil level is ok, proceed to next step.

2. Remove the oil pressure sensor and install a manual oil pressure gauge. Run engine to verify low oil pressure. If gauge shows that the oil pressure is low, overhaul or replace engine. If oil pressure is ok, replace oil pressure sending unit and retest.

Mar 06, 2012 | 2005 Pontiac Grand Prix

1 Answer

My 1996 grand prix started to register cooling temp of over 210 degrees. the motor doesn't seem to be overheating. I've replaced the water pump, thermostat, temp sensor, both fan relays, low coolant...


I would first check the cooling fans. To do this unplug the fans and use two jumper wires to hook them direct to the battery and test. If the fans are working I would have the radiator cleaned or purchase a new one. To clean the radiator take it to a professional and tell them you would like it rodded out. You can purchase a new one for about twice the price. I wouldn't worry about the low coolent sensor. By it being on it will not send a message that your vehicle is overheating. If you have changed everything that you say you have and the fans work and radiator is cleaned you may have a blown head gasket. If you have a blown head gasket you would see steam comming out of the tail pipes or water in the oil on dip-stick. Good luck.

Feb 20, 2011 | 1996 Pontiac Grand Prix

5 Answers

Low collant light is on and has no leak and is full


This problem is common, if the coolant level is OK, check the "coolant sensor" and clean the plug.

Aug 28, 2009 | 1995 Buick Park Avenue

1 Answer

1996 Pontiac Grand Am / Overheating


likely you have a blown head gasket or crack in head. Though common, this condition does not always show up in engine oil. To verify, have a shop do a hydrocarbon test on radiator.

Mar 28, 2009 | 2004 Pontiac Grand Am

1 Answer

1995 Grand AM Bad MPG


the injectors need to be cleaned and clean the air intake throttle body

Dec 27, 2008 | 1995 Pontiac Grand Am

Not finding what you are looking for?
1995 Pontiac Grand Am Logo

Related Topics:

90 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...