Question about 1995 Mercury Grand Marquis

1 Answer

Turn singals & blower motor stop working at same time

All fuses look good

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 667 Answers

Look in your high current fuse box (distribution box) under the hood, inside the box are 4 relays and two rows of fuses, the center row of fuses the second fuse (next to starter/alt fuse if marked) is a 50 amp fuse for turn signals and blower motor, see if it is good, let me know what you find

Posted on Apr 13, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2003 trailblazer blower not working


Are you saying the blower motor would run intermittently and then just stopped working? My first thought is faulty blower motor, I've seen faulty blower motors that would run intermittently. Any motor that uses brushes, you can tap on the motor to see if it will start working, that is a sign of bad motor brushes, replace the blower motor. There could be other issues?
Did you check the blower fuse, not only check the fuse, check the fuse circuit for voltage, use a test light. Check for applicable hvac trouble codes. With hvac on, check for voltage and ground at blower motor wiring connector, if both are good and no blower action, suspect the blower motor.
blower motor-ah4hlr42fk2bjlxp04hurvgv-3-0.jpg

May 13, 2017 | Cars & Trucks

1 Answer

Heater blowerfan works sometimes what is wrong


Your blower motor is bad I would think ! The thing to do would be a currant draw test ! Testing Blower Motor Amperage and Voltage

Mar 09, 2015 | 1998 Ford Contour

4 Answers

Blower stays on when car is turned off won't stop running until I disconnect the battery cable, tried the blower fuse that didn't work. 1995 olds auroa


If you pulled the 10 amp fuse in the I/P fuse block and the blower still worked than the the blower motor module is most likely the problem. It is fed by a 30 amp fus4e in the fuse block under the rear seat. That fuse is always hot and always supply power to the blower motor module. If you pull that fuse and the blower stops than it's pretty likely the blower module is the problem.

The blower module is located near the blower motor. It is usually held in place with 2 screws and will have four or five wires at the connector.

May 10, 2011 | Oldsmobile Aurora Cars & Trucks

1 Answer

Heater fan in 1991 Pontiac sunbird stopped working. We have replaced fuses, and the fan motor. Still not working, continues to blow the fuses. What to do?


Replace the blower motor resistor assembly. To locate the electrical connector for the blower motor resister, it is usually attached to a heating or air conditioning Duct, or the blower motor case. You can also trace the Purple Wire from the blower motor back to the resister. Also make sure that the blower fan is not jamed up with somthing in side and will spin freely,or binding same thing, this will also cause the fuse to blow right away. And does the motor actually spin a bit before it blows the fuse or does it blow the fuse at the same time the switch is turned on? Good Luck and have a good XMASS.

Dec 17, 2010 | 1991 Pontiac Sunbird

1 Answer

I have 2002 infinity I35 and the blower motor stop working ,I took out the blower motor to make sure was good. YES the blower motor still working .the only think I really don't know how to check is Blower...


WELL YOU HAVE TO USE A VOLT METER CONNECT ONE VOLT METER WIRES TO GOOD GROUND AND THE OTHER VOLT METER WIRES GOES TO EACH SWITCH SPEED.IF VOLT METER GET VOLTAGE A 1 OR 2 CONTROL SPEED RESISTOR BAD.IF RESISTOR BAD YOU WILL GET 1 OR 2 BLOWER MOTOR SPEEDS.IF BLOWER MOTOR WORKING.CHECK THE AC AND HEATER CONTROL SWITCH FUSE OR CHECK BLOWER MOTOR FUSE AND RELAY.IF ALL GOOD SO FAR CONTROL SWITCH ITSELF COULD BE FAULTY.

Nov 05, 2010 | Infiniti I35 Cars & Trucks

1 Answer

A/C blower has stopped. Still has cool air coming out of the vents when I accelerate. What should I check for first? Sometimes I hear a sound that might be from the vaccum.


CHECK HVAC FUSE OR BLOWER MOTOR RELAY/FUSE.IF BOTH GOOD BLOWER MOTOR BAD OR CONTROL SWITCH GOING BAD.IF YOU HAVE TO REMOVE BLOWER MOTOR HOTWIRE TEST IT BEFORE BUYING ANOTHER ONE.BE SURE TO DISARM AIR BAGS SYSTEM WHEN WORKING AROUND DASH OR STEERING AREA.REMOVE AIR BAG FUSES TO DISARM.WAIT 10 MINUTES.WHEN YOU GET READY TO ARM AIR BAG PLACE FUSE IN.TURN ON IGNITION THE AIR BAG LIGHT WILL FLASH 7 TIMES THEN TURN OFF.

Aug 08, 2010 | 2004 Chevrolet Silverado

3 Answers

Blower motor and turn signals stopped working


CHECK BLOWER MOTOR FUSE AND RELAY.IF ALL IS GOOD.CHECK TO SEE IF BLOWER IS GETTING POWER.IF NOT.SWITCH IS BAD.IF YES REPLACE BLOWER MOTOR.IF TURN SIGNALS STOP WORKING.CHECK FUSE FIRST.IF FUSE LOOK GOOD. CHECK BULBS TO SEE IF THEY ARE BLOWN.IF BULBS LOOK GOOD PROBLEM COULD BE WORN OR CORRODED BULB SOCKETS OR.BAD GROUND.OR THE TURN SIGNAL SWITCH IS BAD.

Aug 24, 2009 | Plymouth Voyager Cars & Trucks

1 Answer

Fuse keeps blowing on 2004 Jeep Grand Cherokee


Your fan seems to be drawing way too much current, common with fan motors of all kinds when they are going bad. It will still blow, but hot wires and blown fuses in the normal circuit indicate you have an excessive load in the circuit. Fan motors create this condition regularly, but are often ignored since they are "still blowing."

Here's a cheap, easy way to test my theory:
Try a new fuse, the proper amperage, but leave the blower motor unplugged at the blower itself. That will tell you in a few rides if the blower was the culprit. (Which it most likely is.) I bet your #20 fuse will stop blowing and no more smoking pink wires! Hope this helps. Remember, blower motors are cheap, traffic tickets and dash fires are not. The blower motor draw is the logical thing wrong with this picture. Good LUCK! TT

Jan 28, 2009 | 1999 Pontiac Grand Am GT

Not finding what you are looking for?
1995 Mercury Grand Marquis Logo

219 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

fordexpert

Level 3 Expert

5522 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...