Question about 2004 Toyota Highlander

1 Answer

91' Toyota Pickup clutch not depressing/stuck.

I have a 1991 Toyota pick up and the clutch initially dropped to the floor and then popped back out and now won't depress at all, it won't even hit the safety/kill switch. I initally thought it was the master cylinder but it doesn't feel like a hydrolic problem because there is Zero give when trying to depress the clutch. I've looked underneath the stearing colum and nothing seems bent. I even started to release pressure in the master cylinder by slightly loosening the nuts to slightly bleed out a little fluid. Nothing. I've now taken apart the fork assembly attached to the clutch that drives the piston? into the firewall of the truck. Don't want to take too much more apart until I know what I'm doing. clutch is sticking on floor but it will release if i lifty it by hand

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 255 Answers

Dude under truck left hand sideof tranny, is your clutch slave cylinder, remove the hydraulic line, the two mount bolts. replace the slave cylndr. you got clutch !!!!

ps i dont recall there being a bleed valve. it should bleed by gravity


james ray

Posted on Apr 13, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

HOW DO I GO ABOUT SETTING THE TIMING CORRECTLY ON A 1991 TOYOTA PICK UP 22R


Does it pop and backfire? Are you sure the distributor was also correctly set? If any of that is true, you may be 180° out of time.

Mar 19, 2016 | 1991 Toyota Pickup

1 Answer

Why do I hear popping in front end of 91 toyota pickup its sounds like it is in the wheel


most cars this old pop and squeek.

try bouncing it by hand parked to see if it makes noise.
or checking the wheel carefully , for damage or cracks.
try to see what is happening at the moment of noise
moving?
turning,
braking,
bouncing
accelerating or Deaccel?

Feb 11, 2014 | 1991 Toyota Pickup

1 Answer

After sitting for 10 days, clutch is stuck. at first it depressed to the floor and stuck. then I pulled it back, now it won't depress.


check all the linkage to the pedal, if it looks good you will need to pull the trans to check the clutch assembly and through out bearing and the sleeve it rides on

Sep 01, 2013 | 2006 Toyota Tacoma

1 Answer

Clutch drops to floor


You have a small resevoir under the hood, like the brake fluid resevoir. This holds brake fluid also for your clutch master cylinder. See that it has fluid in it. If empty, you have a leak. If full, have someone work the clutch pedal and watch from under the vehicle to see if the clutch slave cylinder is pushing the rod in and out. (Located on the passenger side transmission bellhousing)

Jul 15, 2012 | 1991 Toyota Pickup

2 Answers

91 toyota pickup with clutch problems


First you have to bleed air from clutch fluid.
if it is not ok, Remove clutch agan & check pressure plate finger blance or damage.

Nov 18, 2009 | 1991 Toyota Pickup

1 Answer

Clutch won't engage


There is a problem with the pressure plate spring or possibly the throwout bearing is bound up,you should be able to pull the rubber boot from around the clutch fork and have someone depress the pedal,you should be able to see if it's a problem with the bearing.Unfortunatly the trans is probably going to have to caome off.

May 25, 2009 | 1991 Toyota Pickup

1 Answer

I have a 91 Toyota 4X4 truck. the clutch is hydraulic. Where is the fluid reservoir located?


There is a small "master cylinder", forthe clutch, located on the driver side of the engine compartment, below the master cylinder.

May 06, 2009 | 1991 Toyota Pickup

1 Answer

1991 toyota pick-up ( Dash lights randon turn off )


This is an electrical fault. There is a partial contact in your fuse box. Take your car for diagnosis.

Mar 18, 2009 | 1991 Toyota Pickup

2 Answers

Transmission shift lever - 91 Toyota V6 4WD pickup


Easy fix! Remove boot, take out four screws, shifter pops up, replace bushing! Keep it in neutral before starting.

May 18, 2008 | 1991 Toyota Pickup

Not finding what you are looking for?
2004 Toyota Highlander Logo

291 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8522 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...