Question about 2003 Chevrolet Suburban 1500

1 Answer

My cruise control just stopped working. All the fuses are good, no shot brake lights, turn signals stil work. I don't know where else to look. Thanks, Gerry 2001 Chevy Suburban 4x4 LS

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Odometer cluster in my 2001 model suburban 1500/ goes on and off when i hit bumps or when i turn car off can you tell me whats wrong with it or do i just need another one.

Posted on Jun 02, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

2005 Silverado brake lights on tail not working, cruise out , bulbs and fuses ok


Brake light switch? The cruise and brake lights problems are likely related. The cruise control cuts out when you press on the brakes. I had a van where the cruse wouldn't engage. Then someone pointed out my brake lights were always on. It was the switch.

Dec 03, 2016 | Cars & Trucks

1 Answer

Nissan Xterra Brake Light Fuse Location


It's 15A FUSE 39 in the fuse & fusible link box

Mar 25, 2017 | Nissan Xterra Cars & Trucks

1 Answer

2006 Lincoln Town Car - Cruise Quit Working


check the adjustment under the clutch and brake pedals If the rubber stops are a bit dodgy then the pedal will not activate/deactivate the controls for the cruise.

Apr 28, 2013 | Cars & Trucks

1 Answer

I have a 1996 Ecoline van "Shasta" motorhome. My problem is that the Hazard lights,turn signals,cruise control,and brake lights do not work,all of a sudden. I check all the apropriate fuses and they a


Some vehicles, especially vehicles that use the same lights for brake and turn signal, the brake lights must go through the turn signal switch. If your cruise is on the same switch, I would check your connection under the steering column. If you tilt the column up to get out of the vehicle, you may have unplugged the harness or broken the wires at the tilt point.

Sep 13, 2017 | 1996 Ford Econoline

2 Answers

I own a 2005 GMC Canyon Five CYL and the cruise control stopped working last niight. You push the button and no cruise. I checked the fuse and it is ok I exchanged with another 10AMP and no change still...


Start with the simple and check the fuses and the Stop lamp switch. Check your brake lights, if they're not working, the cruise won't work either. If they're not working, check the fuse for them, if the fuse is fine, then take it into the dealer, there's been a recall issued on the brake switch, so it should get fixed for free.
Cruise Control Disengaged
The powertrain control module (PCM) disengages the cruise control operation based on the signals from the following switches:

* The stop lamp switch
* The TCC brake/cruise release switch
* The clutch release switch, if equipped
* The cruise control On/Off switch

The TCC brake/cruise release switch and the stop lamp switch are mounted on the brake pedal bracket. When the brake pedal is applied, the normally closed TCC brake/cruise release switch opens and the normally open stop lamp switch closes. The PCM detects a low signal voltage on the TCC brake/cruise release switch signal circuit and a high signal voltage on the stop lamp switch signal circuit. When the clutch pedal is applied, the normally closed clutch release switch opens and the PCM detects zero voltage on the CCP switch signal circuit. The vehicle speed stored in the memory of the PCM will be erased when the cruise control On/Off button is turned OFF, or the ignition switch is turned OFF.

The Cruise Control System will disengage when the PCM detects that a driver override function has been active for approximately 60 seconds .

When the Cruise Control System is disengaged, the PCM sends a class 2 message to the instrument panel cluster (IPC) in order to deactivate the cruise control indicator.

Cruise Control Inhibited
The powertrain control module (PCM) inhibits the cruise control operation when any of the following conditions exist:

* A cruise control related DTC has been set.
* The vehicle speed is less than 40.2 km/h (25 mph) .
* The vehicle is in PARK, REVERSE, NEUTRAL, or 1st gear.
* The engine RPM is too low.
* The engine RPM is too high, with fuel cut off.
* The vehicle speed is too high, with fuel cut off.
* The system voltage is not between 9 volts and 16 volts .
* The Traction Control System (TCS) is active for more than 2 seconds .

Thank you for using Fixya and start with replacing the stop lamp switch. Even though the brake light work, it;s been known for that switch to cause your issue. that's way there was a recall for it.

Apr 01, 2010 | 2005 GMC Canyon

1 Answer

Check fuse replace brake light switch, and still no brake lights, turn signal and tail light work fine, any suggestions


first check the fuse for the stop light circuit, if it's good, check your bulbs, it's possible they are all burned out! take one of them out, swap in a new one, and see if it lights. If not, get a wiring diagram and start checking for your powers and grounds. Take a look at the stop light switch on the brake pedal. If it's no good, there is a good chance that your cruise control may not work properly either. Good luck.

Dec 16, 2009 | Dodge Ram 1500 Cars & Trucks

2 Answers

Cruise control problem


There are 3 places on the Rav4 where fuses can be located and checked. for the cuise control.

The back of the cruise control stacking switch has been know to fail (fall apart) and Toyota issued a TSB with replacement switch.

if it is the fuses then they most likely are related to cruise control system: Stop, Dome, Gauge and Igniton
The interior fuse box
The main engine fuse box (by brake fluid)
Cruise control ECU is under the glovebox.
Cruise control actuator is under hood (by driver side brake fluid/booster)Throttle position sensor (to detect if your foot is on gas pedal)
Cruise control switch on the clutch pedal too (if you have 5spd manual)
Brake lights are the deactivate signal for the cruise control


Aug 13, 2009 | 1998 Toyota RAV4

1 Answer

Same problem... No brake lights/cruise control of any kind.


Sounds like you brake lite switch is out of adjustment or a bad switch . most have a adjustment at the switch near the Brake pedal. Good Luck

Jul 09, 2009 | 2001 Porsche Boxster

2 Answers

1999 oldsmobile alero the traction and cruise not working


use a scanner to check the abs system . most of the time the abs brakes and traction control system work together. your cruise control . unit has a servo motor .in front right fender well. check the fuse and relay also the cruise control brake release switch. and the brake light switch.if all is good you have a cruise control module problems. dealer ship job.

Mar 31, 2009 | 1999 Oldsmobile Alero

1 Answer

2003 Denali Yukon, no Brake lights, no Cruise Control, fuse is OK


Check your brake light switch at the pedal. This controls the lights and disengages the cruise when stopping. I'd look there before I go anywhere else. There may just be a wire loose. Could be a simple fix.

Good Luck and hope this helps.

Mar 15, 2009 | 2002 GMC Yukon XL

Not finding what you are looking for?
2003 Chevrolet Suburban 1500 Logo

710 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6918 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...