Question about Dodge Neon

1 Answer

I need to replace driver side mirror on 2005 dodge neon

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

  • Expert
  • 50 Answers

Some of those have a seperate piece of trim inside the door at the mirror and it can be removed by itself to access the nuts. It can be pried off. Others require removal of the door trim panel. If you have take the whole trimi panel off, start by taking the screws out from behind the release handle and inside the pull cup. If you have manual windows you'll have to remove the crank. There's a trick for this: get a cloth rag and tuck it between the crank and trim panel and let the ends hang down. Grab the ends and pull down on them quickly in a sawing motion. You may need to try different positions, but usually it is with the crank pointed straight up or straight down. The cloth will catch the ends of the horse shoe clip and disengage it allowing you to slide the crank off the shaft. Then slide a large flat blade screw driver into the bottom between the trim panel and body and pry outward to release the plastic retaining clips. They go all around the door, but once the bottom comes out far enough to get your fingers in there you can work your way around very easily to release all of them. Some of them will break. There's nothing you can do about that. Just be careful not to break the trim panel. Remove the rod from the release handle by unsnapping it (it rotates) and then pop the rod out. I'd recommend using a bungee cord to support the trim panel so as to not damage the wiring (or disconnect the wires). There should be 3 8mm (or 5/16) nuts that hold the mirror to the door and some models have an additional 8 or 10mm bolt hidden somewhere. It's easy to get to, but it's somewhere you wouldn't expect it to be. I can't remember without looking at one where exactly it is. If it's electric, disconnect the connector. If it's manual, snap the bezel off the adjuster knob. The mirror may stick a little, but generally they come off relatively easy. Hit me back if you need clarification. Good luck.

Posted on Apr 13, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I want to order a replacement driver side mirror for my vehicle. which model do i need?


You need to order an exact replacement for your 2005 Dodge Durango SLT, specifying color and specifying any special features such as an embedded turn signal repeater.

Feb 18, 2016 | 2005 Dodge Durango SLT

1 Answer

Broken mirror glass on driver side, dent in driver door


I would say it's senseless to drive your car in this condition; you should replace it as soon as possible. If you're replacing it with new one it'll cost you lots of money. So lookout for a used door mirror and replace yours, it will cost you less dollars and less efforts too. Few months ago I replaced my taillights with used ones and they are working fine so far. You should also contact http://www.iautobodyparts.com/door_mirror-catalog/ for used door mirrors.

Sep 14, 2013 | 2000 Dodge Neon

4 Answers

How much will it cost to replace the oil pump in a 2005 dodge neon


An oil pump for a Dodge Ram 2010 3500 cost: $111.20!!!
In this age of high gas prices, drivers who care about gas consumption are taking an interest in the Dodge Neon and buying top quality parts. When contemplating sturdy build and long lasting performance you want a stylish car from Dodge. For hardworking quality and styling from a vehicle, car lovers can believe in Dodge.

If an issue develops or a component needs to be replaced, don\'t economize with a second-rate part. A Dodge Neon is worth genuine OEM and aftermarket parts to function at top efficiency. When you wisely choose a trustworthy, historic Dodge, there\'s no doubt you\'ll get superb style. For decades Dodge has engineered heavy-duty and reliable cars that car buyers can count on to get the job done. For eye-catching style with tons of power car enthusiast turn to Dodge for their sporty vehicle needs. To maintain the resale value and luxury you bought with your Dodge Neon, it\'s important to select only the most reliable high-value car parts. Frugal people just need a sensible vehicle like the Dodge Neon. The Dodge Neon is a vehicle engineered for high performance and it requires the best quality auto parts. Excellent horsepower and automotive performance are derived from great parts and accessories.

The Dodge Neon Oil Pan is fitted to the bottom of the motor and encloses the sump which retains oil as well as the oil pump. Your Dodge Neon Oil Pan is used as a receptacle for the oil. Your vehicle\'s Dodge Neon Oil Pan retains oil in reserve and is frequently made from steel or aluminum and has an oil pan gasket to stop leaks. Your car or truck\'s Dodge Neon Oil Pan is bolted on the underside of the car or truck and supports the oil pump unit. Dodge Neon Oil Pans are important to lubrication and if they are old, your car\'s motor will definitely sustain damage. The Dodge in your carport was made using care and skill; it should have replacement components of the same high level of value. One website which makes finding affordable parts easy is PartsGeek.


18256-01144165-1085557.jpgThey are available for the following Dodge Neon years: 2005, 2004, 2003, 2002, 2001, 2000, 1999, 1998, 1997, 1996, 1995, 05, 04, 03, 02, 01, 00, 99, 98, 97, 96, 95. This part is also sometimes called Dodge Neon Engine Pan.

We stock these Oil Pan brands for the Dodge Neon: Mopar, Dorman and Replacement.



Nov 19, 2011 | 2005 Dodge Neon

1 Answer

2005 Dodge Neon looses power.


if your standing in front of the car facing the engine. It's on the right side behind the rear of the head. It's square with 4 10mm bolts and a plug in thats a pain to get unpluged sometimes.

Jan 13, 2010 | 2005 Dodge Neon

1 Answer

Driver side view mirror need to replace not power


chek your local auto parts store you can usually buy the replacement glass with adhesive tabs already on it fairly cheap

Oct 14, 2009 | 2005 Dodge Caravan

1 Answer

What is the proper sequence for rotating tires?


My understanding is that with radial tires that are in use today, you should rotate front to back on same side. Not side to side.

Jul 09, 2009 | 2005 Dodge Neon

1 Answer

How to change a sideveiw mirror on a 2003 dodge neon Drivers side


Remove the door panel & the piece of plastic covering the inside of the car where the mirror bolts to. remove the 10mm bolts & the mirror is off. Install the new one & if it's a power mirror,reconnect the wiring & put all back together. Note if you have manual windows you need a special tool you can get at any auto parts shop. This tool removes the clip for the window crank. Oh & the doorpanel pops out from the bottom,then you lift it up. Don't just pull on it!!

Jun 27, 2009 | 2003 Dodge Neon

1 Answer

Passenger side mirror replacement


you should be able to take it off from the inside of the car directly behind were the mirror is. usually ther eis a molding cover ing the mounting screws . take off the molding , mabey a few screw then some body clips that just snap off. now you should unplug the harness if necessary and remove the three or four bolts that hold the mirror on, and that should be it. hope this helps

Apr 28, 2009 | 1997 Dodge Neon

1 Answer

Crankshaft sensor


it is in the front of the engine slightly to the driver side of center. it has one bolt on the right side from front that takes 11/32 socket.

Nov 26, 2008 | 2005 Dodge Neon

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

172 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...