Question about 2008 Hyundai Accent
How to remove radio from hyundai accent 1998
You have to take out the ash tray, and remove those two screws, then pop out the center dash trim. Careful, though, you have to take out a lot of the wiring inside of your center dash trim in order to pull it out for enough room to move the radio in and out. I'm doing this right now, actually..
Posted on May 22, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
You have to take out the ash tray, and remove those two screws, then pop out the center dash trim. Careful, though, you have to take out a lot of the wiring inside of your center dash trim in order to pull it out for enough room to move the radio in and out.
OR more elaborately try the following:-
1. Remove the panel under the steering wheel. There should be four bolts - the two at the top are covered with plastic caps. When you have removed the panel, take off the two climate control cables that run to the air controls on the dashboard. They should be secured with clips which need to come off, and the wire centre is wound around a small control knob which should have a push in clip so the wire can slip off.
2. Make the glove box drop down by removing the two plastic clips at the back of the inside of the glove box. These clips are the glove-box buffer stops and should spring off and can be pulled through the clip-opening. Behind the glove-box is another wire to un-clip, but this one slips straight off the metal control actuator.
3. Remove the ash-tray by pressing the spring loaded metal part down and take the two screws out at the back of the ash-tray. You should now be able to unclip the central dashboard. Use a screwdriver to lever it away gently, and watch for the small metal clips that drop out as you do so. As you pull it away the cables you unclipped will come away from their place and come out with the dash unit.
4. After pulling the dash-board out a few inches you should be able to see the seating screws for the radio. Take all the screws out and pull the radio forward. By unclipping the cables at the top of the unit you will find you have enough play to pull the driver's side right forward and jigger the head unit out of the gap on one side of the unit.
Thanks for contacting fixya.com
Posted on Nov 13, 2009
Tips for a great answer:
Jan 05, 2016 | Hyundai Cars & Trucks
Aug 02, 2012 | 2001 Hyundai Accent
Mar 28, 2010 | Hyundai Motor 1998 Accent
Nov 29, 2009 | Hyundai Motor 1998 Accent
Sep 27, 2009 | Hyundai Motor 1998 Accent
Jun 30, 2009 | Hyundai Motor 1998 Accent
Apr 14, 2009 | Hyundai Motor 1998 Accent
Oct 30, 2008 | 2003 Hyundai Accent
1,722 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: