That is the time to change oil code. They will reset when you get it changed, if not take it back and remind them. I assume you are not doing it yourself if you don't recognize the code. I'm a mechanic and I don't change my own oil either, it's cheaper to have them do it, just don't fall for the extra stuff they tell you that you need. Check out what they tell you first then decide if it's needed
Code 82 is crank shaft position sensor circuit
replace the sensor
SOURCE: i just bought a holden cruze 2002 and the radio need's a code can you lpease help
post radio chassis number then i might be able to generate the code if the numbers are right ,take the radio out to find the chassis number of the radio
SOURCE: On the dash of a holden cruze (2002 Model) there
This is the vehicle's check engine light, and it means that the on-board diagnostic computer has detected a fault and stored a service code. Your Holden dealer, any reputable mechanic, and many auto parts stores can retrieve the code and tell you what part or system requires service.
Bill B.
SOURCE: how do you clean the IAC valve in a 2012 Cruze?
you dont touch it. just bring it to the dealer and they will replace it free of charge.your vehicule comes with at least a 2 year guarantee.
SOURCE: how do i remove the battery from a 2010 holden cruze
It is under a black plastic cover in the front left of the engine compartment. Remove the cover then the negative cable and then the positive and the one retaining block at the base of the battery that holds the battery retaining wedge.
18,275 views
Usually answered in minutes!
Bill Boyd it says code 89, totally different than crank sensor
×