Question about 1988 Ford Bronco II

1 Answer

Power Windows go up or down Crooked

1990 Bronco ii power windows/ the motor is fine, but windows go up all crazy angles and sometimes need to be shifted back into place by hand then continue to roll up or down. Looked at it and seems there is just a rubber guide at the aft end of the window, nothing else.??

Posted by on

  • srekkas May 02, 2009

    well it turns out that ford has nylon bushings in the center vertical track that snap into little ball shaped ends on the regulator..these were worn out big time. went to a "you pull it" salvage yard, got a coupla bushings out of a ranger and voila! works fine now....just had to really lube up the track that the bushings ride in. works like new.

  • srekkas May 04, 2009

    you have issues, pal/ whatever

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Ford Master
  • 443 Answers

Yes there is a broken clip on one end or the window .. you will have to take it appart and see which one is broken and order it from a dealer .. some auto parts carry these little deals they are plastic and they screw into both sides of the glass with a arm on one side for the chanel operation.. thanks Jerry and holler if you need more.

Posted on Apr 13, 2009

  • Jerry Koski
    Jerry Koski May 02, 2009

    Inappropriate ... thanks guy .. your appreciated.. I just set here and answer these stupid questions all day and get paid 0 for it..

  • Jerry Koski
    Jerry Koski May 03, 2009

    Inappropriate would have been if i were talking about your coil or something in your engine ... I might have just used different words than you did ... your an idiot anyway.. and no worries I quit this dam site.. thanks Jerry

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Acceleration and/or fuel problem ???


As crazy as it sounds take a bike tire pump and blow from the intake back toward the tank. We had an issue like that, air back flow solved it. Sounds crazy I know. Maybe install a clear inline fuel filter and look for debris or air in the line. Also maybe a split in brittle plastic fuel line back around tank. Hope this may help.

Jun 16, 2014 | 1990 Ford Bronco II

1 Answer

1990 ford bronco with fuel injected 302 idles and revs fine out of gear but has loss of power and pings when in gear and accelerating...


First thing to try would be different fuel. Use a fuel stabilizer and fill with good gas. see if that helps. Also, check the fuel pressure.

Nov 11, 2013 | 1990 Ford Bronco

1 Answer

My 1990 bronco no have power up hill


it could be knocking judging by the little explosions you described

Nov 23, 2012 | 1990 Ford Bronco II

2 Answers

Parts question


I don't know if your talking about a big bronco or a bronco ll. I'm really not sure about the difference in sheetmetal, you may have to take off the old door & match it up with the replacement door. As for the windows and locks, as long as both doors had power locks & windows, make sure the replacement door still has the window glass in the door assembly. You may want to take the time & test the motor on the new door, finally make sure your wires will connect with replacement door.

Jul 06, 2010 | 1990 Ford Bronco

2 Answers

I have a 1990 bronco, and the driver side power window won't go back up. I believe the motor is shot, and I probably need to fix it, so how would I go about doing that? does anyone have instructions on...


first try to replace the switch,
if not, you have to take out the door panel, and then you'll be able to get to the elevator, the motor comes out easy, it's fixed just with some screws

Mar 13, 2010 | 1990 Ford Bronco

1 Answer

1990 ford bronco II stuck in 4 low with 4x4 light flickering


have major problems with the electric motor assy on side of transaxle.. need a manual for testing and replacing

Jan 04, 2010 | 1990 Ford Bronco II

1 Answer

89 ford bronco driver and passenger power windows roll down but wont roll up with out help they just sit thier and make a jerking motion up and down in the same spot


likely is an issue with the motor itself, or could possibly be due to dirt/rust in the way on the track. best to take the forward window panel out and check if it is blocking the way otherwise replace the power window motor.

Dec 28, 2009 | 1989 Ford Bronco

1 Answer

Both driver and passenger pwr windows won't work.1990 bronco 2


see if you have power switches . then try replaceing the driver side switch frist. if that duse not work then you will have to re place the windo motors.

Jul 08, 2009 | 1990 Ford Bronco

1 Answer

My 1990 ford bronco rear window will not go up all the way. it goes down fine but when it starts to roll up it stops halfway up.


Your window fuse, relay or motor may be dying and no longer powerful enough to close your window all the way up. So as not to be repetitive, for the failure of your power driver side window and rear window, review this handy diagnostic article, which identifies the possible causes, from a bad fuse, relay to window motor, etc.:
http://yourhandymanzone.com/Your_Handyman_Zone_How_To_Pages_Vehicle_Car_Zone_Cars_Trucks_Vans_Windshield_Windows_Window_Does_Not_Roll_Up_Down.htm

This should help narrow down your particular cause.
Brad

Jun 07, 2009 | 1990 Ford Bronco

Not finding what you are looking for?
Cars & Trucks Logo

302 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...