Question about 2001 Isuzu Trooper

1 Answer

Check engine light on due to issue with EGR valve

The check engine light is on and it references that there is a insufficient flow with the EGR valve. I replaced the EGR valve but the check engine light is still on. Is there something else I need to do, check, clean, or replace. Thanks!

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 11 Answers

You need to reset the cars cpu,..you can do this by unhooking the negative side of the battery for about 10 minuts,then if the light comes on again,run the obd2 reader again,because there is another problem.

Posted on Apr 13, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Is there any issue if we bypass the EGR valve?..


You cant,without the EGR having a clear flow you end up with a hole in your piston.The purpose of the EGR not only is it emission such as Nox.But it cools the combustion chamber.Ten year ago yes it interfered with power now the engine fuel stratedgy is to have a EGR,The MAF looks for the opening

Apr 01, 2012 | Honda Civic Cars & Trucks

2 Answers

Check engine light code P0401 98 Ford expedition


OBD-II Trouble Code P0401 - Insufficient EGR Flow

EGR stands for Exhaust Gas Recirculation. It is part of the vehicle emmissions system, and is used to reduce combustion temperature and pressure to control Oxides of Nitrogen. There are generally three parts to the EGR system: the EGR valve, an actuator solenoid, and a differential pressure sensor EGR (DPFE). These things work together to deliver the correct amount of recirculation based on engine temperature, load, etc. The P0401 code means that OBD detected an insufficient amount of EGR. You may notice drivability problems such as pinging (a.k.a. pre-ignition knock) when the engine is under load or the vehicle is at higher speeds. There may also be other symptoms.

A code P0401 most likely means one or more of the following has happened:
The DPFE (differential pressure feedback EGR) sensor is faulty and needs to be replaced
There is a blockage in the EGR (tube), most likely carbon buildup
The EGR valve is faulty
The EGR valve may not be opening due to a lack of vaccuum

Check it and keep us updated. Hope this helps (remember to rating this free answer).

Oct 13, 2011 | 1998 Ford Expedition

1 Answer

1997 volvo 960, check engine light on with P0401. These motronic 4.4 do not have EGR, p0401 mean insufficient EGR flow. How do you fix this if there is no EGR?


A code P0401 most likely means one or more of the following has happened:
* The DPFE (differential pressure feedback EGR) sensor is faulty and needs to be replaced
* There is a blockage in the EGR (tube), most likely carbon buildup
* The EGR valve is faulty
* The EGR valve may not be opening due to a lack of vaccuum

In fixing this code, it is quite common for people to just replace the EGR valve only to have the OBD code return. The EGR valve is not always the culprit.
* Use a vacuum pump and pull the EGR valve open while monitoring engine RPM's & DPFE voltage. There should be a noticable difference in RPM's with the EGR open
* Clean out the EGR valve and/or tubing to remove deposits
* Check the voltage at the DPFE, compare to specified values (refer to a repair manual for your specific model)
* Replace the DPFE sensor (with a good quality / OEM one)
* Replace the EGR valve

Check it and send us your advance.

Mar 02, 2011 | 1997 Volvo 960

1 Answer

Egr trouble light


The EGR Valve and System - it's just three letters, but EGR can result in AGGravation.

Common in automobile emission systems since the early 1970s, the EGR (Exhaust Gas Recirculation) valve controls an engine's emission of smog-causing nitrous oxides, or NOx. Its job is to route a portion of the exhaust gases back into the intake manifold. That lowers combustion temperature to below 2,500 degrees Fahrenheit - the temperature at which NOx gases form.

EGR flow is controlled by the engine's computer, which opens or closes the valve as needed. The EGR system is, for the most part, in the "out of sight, out of mind" category, and typical doesn't require regular maintenance. But if it gets clogged with carbon deposits, you'll see your "check engine" light come on, and a code (perhaps P0401 or P0402 or P0403) will show that there is insufficient flow. That typically results from a vehicle being driven persistently on short trips that don't allow the engine to fully warm up. Flow problems also can be caused by carbon buildup due to failure to change the oil frequently enough.

A clogged EGR valve not only results in higher emissions, it can affect fuel economy and cause rough idling - even serious engine damage. Valves can usually be cleaned, but replacement is often recommended.

A code P0401 most likely means one or more of the following has happened:
* The DPFE (differential pressure feedback EGR) sensor is faulty and needs to be replaced
* There is a blockage in the EGR (tube), most likely carbon buildup
* The EGR valve is faulty
* The EGR valve may not be opening due to a lack of vaccuum

Possible Solutions: In fixing this code, it is quite common for people to just replace the EGR valve only to have the OBD code return. The EGR valve is not always the culprit.
* Use a vacuum pump and pull the EGR valve open while monitoring engine RPM's & DPFE voltage. There should be a noticable difference in RPM's with the EGR open
* Clean out the EGR valve and/or tubing to remove deposits
* Check the voltage at the DPFE, compare to specified values (refer to a repair manual for your specific model)
* Replace the DPFE sensor (with a good quality / OEM one)
* Replace the EGR valve

Jan 11, 2011 | 1999 Isuzu Trooper

2 Answers

Trouble code p0401


P0401 - Insufficient EGR Flow

EGR stands for Exhaust Gas Recirculation. It is part of the vehicle emmissions system, and is used to reduce combustion temperature and pressure to control Oxides of Nitrogen. There are generally three parts to the EGR system: the EGR valve, an actuator solenoid, and a differential pressure sensor EGR (DPFE). These things work together to deliver the correct amount of recirculation based on engine temperature, load, etc. The P0401 code means that OBD detected an insufficient amount of EGR.

Symptoms: You may notice drivability problems such as pinging (a.k.a. pre-ignition knock) when the engine is under load or the vehicle is at higher speeds. There may also be other symptoms.

Causes: A code P0401 most likely means one or more of the following has happened:
* The DPFE (differential pressure feedback EGR) sensor is faulty and needs to be replaced
* There is a blockage in the EGR (tube), most likely carbon buildup
* The EGR valve is faulty
* The EGR valve may not be opening due to a lack of vaccuum

Possible Solutions: In fixing this code, it is quite common for people to just replace the EGR valve only to have the OBD code return. The EGR valve is not always the culprit.
* Use a vacuum pump and pull the EGR valve open while monitoring engine RPM's & DPFE voltage. There should be a noticable difference in RPM's with the EGR open
* Clean out the EGR valve and/or tubing to remove deposits
* Check the voltage at the DPFE, compare to specified values (refer to a repair manual for your specific model)
* Replace the DPFE sensor (with a good quality / OEM one)
* Replace the EGR valve


Hope this helps to solve it (remember to rate this answer).

Jan 06, 2011 | Ford F-250 Cars & Trucks

5 Answers

ENGINE RUNS FINE. SERVICE LIGHT IS ON AND THE CODE NUMBER SHOWING IS PO401. WHAT IS THIS FOR SAYING?


  1. po401 refers to an insuffient flow of EGR gasses
  2. locate egr valve
  3. with engine running at idle
  4. on the underside of the valve you can access the diaphram.
  5. wearing glove if ness
  6. lift diaphram while idling
  7. does engine stall or run very rough?
  8. if not remove valve
  9. start engine
  10. you should hear a very large vaccum leak and exhaust noise
  11. if either are missing investigate cause
  12. if ok reassemble.
  13. locate DPFE sensor
  14. inspect sensor for damage
  15. inspect hose to sensor for damage
  16. replace sensor
  17. 9ecffd7.gif

Aug 10, 2010 | 1999 Ford Taurus

1 Answer

New egr valve installed. insufficient air flow.


EGR stands for Exhaust Gas Recirculation. It is part of the vehicle emmissions system, and is used to reduce combustion temperature and pressure to control Oxides of Nitrogen. There are generally three parts to the EGR system: the EGR valve, an actuator solenoid, and a differential pressure sensor EGR (DPFE). These things work together to deliver the correct amount of recirculation based on engine temperature, load, etc. The P0401 code means that OBD detected an insufficient amount of EGR.

Symptoms
You may notice drivability problems such as pinging (a.k.a. pre-ignition knock) when the engine is under load or the vehicle is at higher speeds. There may also be other symptoms.

Causes
A code P0401 most likely means one or more of the following has happened:
* The DPFE (differential pressure feedback EGR) sensor is faulty and needs to be replaced
* There is a blockage in the EGR (tube), most likely carbon buildup
* The EGR valve is faulty
* The EGR valve may not be opening due to a lack of vaccuum


For several solutions ans next steps, in fixing this code, it is quite common for people to just replace the EGR valve only to have the OBD code return. The EGR valve is not always the culprit:
* Use a vacuum pump and pull the EGR valve open while monitoring engine RPM's & DPFE voltage. There should be a noticable difference in RPM's with the EGR open
* Clean out the EGR valve and/or tubing to remove deposits
* Check the voltage at the DPFE, compare to specified values (refer to a repair manual for your specific model)
* Replace the DPFE sensor (with a good quality / OEM one)
* Replace the EGR valve

Hope this helped (remember comment and rated this).

May 05, 2010 | 1999 Buick Regal

4 Answers

Insufficient egr flow, already replaced egr valve and purge valve canister


I too replaced the egr valve and was discouraged that the check engine light came back on with the same "insufficient flow" code. I took it to my mechanic to put it on the monster diagnostic machine. It said "check all vacuum line, and or map sensor". After looking real close we found a melted vacuum tube, and a cracked vacuum angle connector. Replaced both vacuum pieces, reset the codes, and good to go. If that fails than the next thing is the map sensor, that tells the EGR valve what to do.

Jan 12, 2010 | 2002 Chevrolet Impala

2 Answers

Check engine light came on codeP0401


Yes, this is a carbon issue. the EGR valve is very sensitive to carbon deposits. i suggest using pressured air to clean out this throttle body before you purchase another valve. it will keep rejecting the egr if its not cleaned.

Mar 07, 2009 | 1996 Honda Accord

1 Answer

2002 accord code P0401 [egr insufficient flow detected]


the code you have may not be due to insufficient lift, more likely you have either high or low voltage running through egr. replace the valve and your issues should go away.

Jan 30, 2009 | 2002 Honda Accord

Not finding what you are looking for?
2001 Isuzu Trooper Logo

Related Topics:

729 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

76691 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14381 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...