Question about GMC Envoy

1 Answer

I need to know how I change the front brake pads on my 2002 gmc envoy

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 1,077 Answers

It would be to hard to tell and show you over the computer.
The best and easiest way for you is to buy a Chilton manual for your car at the autoparts store. The book runs about $20
This book is a do-it-yourself bible. It will show you everything you need to know on how to do maintenance and repair on your vehicle.

Posted on Apr 13, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

My friend has a 2003 GMC Envoy and we replaced the wheel bearings and noticed the brake pads needed to be replaced after replacing the pads the front driver side wheel is getting very hot.

It is best to replace the rotors as well. Either the pins that the caliper floats on weren't cleaned and greased properly or the pads weren't correctly shimmed.

As well as getting hot, you are using more fuel.

2003 GMC Envoy replace brake pads Google Search

Jun 05, 2018 | GMC Cars & Trucks

1 Answer

Vibration in front end especially after 40 mph

Hi Randal:
Odds are it will either be brakes, bearing, or drive shaft.
You'll need to jack it up, make sure it is supported safely, and check the brake pads and rotors. Then check the drive shaft cv joint and the bearing.

Feb 07, 2016 | 2002 GMC Envoy

1 Answer

2005 gmc envoy front pads won't release put on 2 new calipers,2 brake hoses,2 new rotors&pads.I forgot,put on new Master cylinder.changed calipers twice thought they might be defective.

On a 2005 vehicle-- at most-- you may need
new rotors & pads,that is all

I'm lost at that story

Don't really grasp what your doing
or what you got yourself into

If I ask any questions-- I feel I will insult you,
so weigh in if you want

Dec 03, 2014 | 2005 GMC Envoy

2 Answers

2005 gmc envoy front pads won't release put on 2 new calipers,2 new brake hoses, new rotors & pads. can you help?

Check ur master cilinder , a way to know if your wheels are free, jack it up turn the wheel by hand if not realese the bleeder on top of the caliper and try again if it is free probably u need to replace master cil.

Dec 02, 2014 | 2005 GMC Envoy

1 Answer

2005 GMC Envoy, no brake fluid is getting to the right front caliper. disconnected the brake line where the rubber line and the metal line are attached, pumped brakes and get absolutely no fluid through...

You may have a defective line on the right front brake. GM had a batch of bad lines installed on several year models. I had one collapse on mine with the caliper closed and burned my caliper, rotor and pads. Try to disconnect the metal line further back at the equalizer and see if you get fluid there. If you do replace line.

Mar 11, 2011 | 2005 GMC Envoy

1 Answer

How do install front brake pads on 2004 gmc envoy

Honestly if you have to ask, take it to a mechanic, Brakes are not something you should do with no experiance, its far to important

Aug 10, 2010 | 2004 GMC Envoy

1 Answer

While coming to a stop front of vehicle sqeeks

this is consistant with the wear indicators on the brake pads. have the brakes inspected and dont fall for replacing calipers and all the other garbage they try to sell. go with ac delco pads and machine the rotors on the vehicle. happy holidays

Dec 29, 2009 | 2002 GMC Envoy XL

1 Answer

I have a 2002 GMC envoy, when I come to a stop about 2 ft. from dead stop my front end thunks.

my envoy was doing this too, i went all through my brakes and it still did it, i noticed a bad tie rod end and after i changed it and had an alignment done i dont hear it anymore, so check tie rod ends for play and also check the sway bar end links

Nov 08, 2009 | 2002 GMC Envoy

1 Answer

Where is the interior fuse panel on my 2002 gmc envoy? Thanks!

There are two fuse boxes on a 2002 Envoy One under the Rear seat on the drivers side and one under the hood on the drivers side.

Mar 19, 2009 | 2002 GMC Envoy

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

460 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts


Level 3 Expert

80531 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides